H.B. Fuller logo

Intrafol™ 1225

1 of 5 products in this brand
Intrafol™ 1225 is a versatile solvent-based primer specifically designed for ABS edges. It is NEP/NMP-free and has a medium viscosity and drying time. The main use of this primer is for adhesion promotion in edgebands and foils within the woodworking industry.

RTU Product Type: 1K (1 component) Coating, 2K (2 component) Coating, Primer, Solventborne Coating

Application Area: Decorative Edges, Furniture, Panels, Woodwork

Compatible Substrates & Surfaces: Acrylonitrile Butadiene Styrene (ABS), Composites, Wood

Features: Good Paint Adhesion, Highly Versatile, Medium Drying Time, Medium Viscosity, Non-Blocking

Application Method: Roll Coater

Chemical Family: Polyvinyl Chlorides (PVC)

    Enhanced TDS

    Identification & Functionality

    Chemical Family
    Polyvinyl Chlorides (PVC)
    RTU Product Type
    1K (1 component) Coating,
    2K (2 component) Coating,
    Primer,
    Solventborne Coating
    Technologies
    Ready-to-Use Products
    Product Families
    Ready-to-Use Products — Paints & Coatings
    Primers & Sealers

    Features & Benefits

    Labeling Claims
    N-Methyl-2-Pyrrolidone (NMP)-free,
    Nonylphenol Ethoxylates (NEP)-free,
    Sustainable
    Ready-to-Use Product Features
    Good Paint Adhesion,
    Highly Versatile,
    Medium Drying Time,
    Medium Viscosity,
    Non-Blocking

    Applications & Uses

    Markets
    Building & Construction,
    Consumer Goods
    Applications
    Building & Construction — Building Materials
    Wood
    Consumer Goods — Furniture
    Application Area
    Decorative Edges,
    Furniture,
    Panels,
    Woodwork
    Application Method
    Roll Coater
    Compatible Substrates & Surfaces
    Acrylonitrile Butadiene Styrene (ABS),
    Composites,
    Wood

    Properties

    Physical Form
    Liquid
    Typical Properties
    ValueUnitsTest Method / Conditions
    Density0.84g/cm³Internal HBF Standard
    Drying Time (at 70°C, When applied to warm edge band, drying at room temperature may be sufficient.)20 - 30s-
    Processing Temperature15 - 25°C-
    Solid Content14.3%Internal HBF Standard
    Storage Temperature5 - 35°C-
    Viscosity (at 20°C)40sFord Cup 4
    Viscosity (at 20°C)35sDIN 53211 Cup 4
    Weight Per Unit Area (Wet)30 - 50g/m²-

    Technical Details & Test Data

    Processing Information
    Suitable Substrates

    Acrylonitrile butadiene styrene (ABS)
    Suitable Adhesives

    Edge banding hot melts (e.g. EVA, APAO, reactive PUR)
    Consistency Liquid
    Surface Requirements Dry
    Free of grease
    Free of dust
    Free of oil
    Application Method

    Roller coating
    Hints Allow the coated substrate to cool to room temperature before
    winding it up.
    Preparation

    Intrafol" 1225 must be stirred well before use
    Processing Information

    Preparation

    The surfaces to be bonded must be dry, free of grease, free of dust and free of oil.

    Processing

    Apply a thin and homogenous coat of Intrafol™ 1225 on the plastic surface and dry the applied film. Refer to the technical data table regarding the Drying time. For new materials or applications, the suitability must be confirmed by preliminary tests.

    Packaging & Availability

    Regional Availability
    • Asia Pacific
    • Europe
    • India/MiddleEast/Africa (IMEA)

    Storage & Handling

    Storage Information

    Intrafol™ 1225 should be used within the shelf life specified on the packaging. The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature)