H.B. Fuller

Enhanced TDS

Chemical Family: Polychloroprenes
GBU: EA
RTU Product Type: Contact Adhesive,

2K (2 component) Adhesive,

Solventborne Adhesive

Categories: Markets → Industrial → Applications → Maintenance, Repair & Overhaul

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → 2K Liquid Reactive Adhesives

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Contact Adhesives

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Solvent-Based Reactive Adhesives

Cleaning Information

Preparation Information

The surfaces to be bonded must be dry, clean, free of grease and free of dust to ensure a reliable bonding
Adhesive must be stirred well before use. The hardener must be incorporated homogeneously
By adding the cross-linking agent, the resistance of the adhesive can be significantly improved.
To improve the adhesion on metal surface, we recommend applying our Swift®prime 2903 before coating with the adhesive.

Processing Information

Apply adhesive evenly with a suitable application method on the two parts to be bonded.
After the recommended waiting time (flash-off time) put the parts accurately together and press.
The waiting time depends on the ambient temperature, thickness of the adhesive film and absorbency of the surfaces.
The surfaces to be bonded should be placed together when the adhesive film is still slightly sticky but does not stick to the finger when it is pressed lightly.
The parts have to be bonded together within the Contact bonding time.
When bonding rubber to rubber, it is recommended to apply the adhesive twice, waiting at least 10 minutes after the first application for the adhesive to dry.
When bonding textiles the adhesive must be applied three times to achieve a good adhesion (in this case, too, at least 10 minutes should be allowed for drying of the adhesive after each application).
Suitable Substrates - Rubber, Various steel alloys, Various metals and Textile.
Application Method - Brush With spatula

Product Application

Ready-to-Use Product Features: Excellent Humidity Resistance,

Temperature Resistance,

High Initial Strength,

Brushable,

Weather Resistance,

Non Flammable

Product Benefits

Regional Availability

Storage Information

Helmitin® 14030 should be used within the shelf life specified on the packaging.
The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).
High temperatures shorten the shelf life.
Low temperatures temporary cause a higher viscosity.