Products

Childers® Chil-Perm® CP-30 Low Odor Vapor Retarder Coating is a highly effective coating designed for low-temperature applications. It has a unique consistency in its wet state, making it suitable for heavy or thin film applications. This coating is formulated with an elastomeric resin, resulting in a tough and flexible dry film with strong adhesive properties.

Foster® Chil-Lock CP-240 Asbestos Removal Agent/Post Removal Sealer is an economical, fire-retardant, polymeric water-based asbestos removal agent and post-removal sealer. In its role as a post-removal sealer, it is specifically designed to mist, securely bind, and seal free asbestos fibers and any residual asbestos-containing material (ACM) remaining after removal. This highly effective solution firmly locks ACM onto cleaned, exposed surfaces and polyethylene sheeting within the containment area, preventing the release of loose fibers into the air.

Foster® Fire Resistive Adhesive 81-33 is a high-quality adhesive designed for securely bonding thermal insulation to various structural surfaces. This quick-setting adhesive exhibits excellent specific adhesion to materials such as iron, steel, aluminum, and most types of thermal insulation. Notably, it can be employed without the need for mechanical fastening, making it suitable for marine hull insulation applications.

Childers® Chil-Joint® CP-70 Sealant is a cost-effective joint sealant designed for use in various insulation systems, including low-temperature, dual-temperature, and some high-temperature applications. This sealant is non-shrinking and non-drying, ensuring long-lasting performance. It is also available in caulking tubes for application with hand or power caulking guns.

Childers® Chil-Out™ CP-33 Vapor Retarder Coating is a water-based solution for interior and exterior insulation, HVAC ducts, and low-temperature equipment. It dries quickly to form a durable, flexible film, safeguarding insulation and inhibiting vapor flow. Its smooth consistency allows for easy application in varying thicknesses.

Foster® 83-13HM ZP Hot Melt Adhesive is a high-performance, pressure-sensitive hot melt adhesive (PSA) designed for specific applications in attaching facing materials to various types of thermal insulation in pipe covering and facing projects. This adhesive is compatible with a range of facing materials, including ASJ, FSK, Saran, polyester, and other paper and aluminum foil laminate facings, when used in conjunction with fiberglass, PIR, PUR, phenolic, polystyrene, and cellular glass insulations.

Foster® Eclipse™ Coating 40-11 is a low-odor, fast-setting, water-based surfacing material designed for field or shop application to faced or unfaced fiberglass duct liner or fiberglass duct board insulation. Its low viscosity enables application with a wide range of spray equipment available in the market.

Foster® Cryogenic Vapor Stop Sealant 90-66 is a two-part elastomeric sealant designed for cryogenic applications as a vapor stop sealant. It is suitable for use with various insulation materials such as polyurethane foam, polyisocyanurate (PIR) foam, cellular glass, fibrous glass, aerogel, and other rigid and flexible insulations. This sealant is compatible with aluminum, stainless steel, metals, wood, and masonry construction materials.

Childers® Chil-Lastic™ CP-79 Sealant and Coating is a versatile, high-temperature sealant and coating applied by trowel over various thermal insulations, except polystyrene. This asphalt-based coating creates a tough, durable, heavy film and can withstand elevated temperatures. Before putting hot lines, vessels, or tanks into operation, they should be cured at ambient temperature with proper ventilation to prevent the potential boiling out of the residual solvent.

Foster® Monolar® Mastic 60-90 is a durable and flexible elastomeric finish specially formulated to protect outdoor thermal insulation. This coating contains chlorosulfonated polyethylene rubber. It serves as an effective vapor retardant for low-temperature insulation applications on tanks, pipelines, vessels, ductwork, and fittings.

Foster® Stic-Safe® Adhesive 85-15™ is a fast-setting synthetic elastomer adhesive tailored for affixing fibrous glass insulation (up to 6 lbs.) to sheet metal surfaces like galvanized steel or aluminum found in air-conditioning ducts, hot air ducts, and metal buildings. Foster® 85-15™ unique consistency facilitates quick and effortless brushing onto metal ducts and various other surfaces. Additionally, it serves as an effective adhesive for lap-sealing vapor barrier jackets.

Foster® 40-30C Protective Coating is a low-odor, fast-setting, water-based surfacing material intended for field or shop application to faced or unfaced fiberglass duct liner, fiberglass duct board insulation, or galvanized surfaces. Its low viscosity makes it suitable for application with a wide range of spray equipment currently available on the market.

Foster® Asbestos Removal Encapsulant 32-61™ is a water-based polymeric coating that offers an effective solution for dealing with various types of asbestos, including AMOSITE and CROCIDOLITE. This coating rapidly and thoroughly penetrates the asbestos-containing material (ACM), ensuring it becomes fully saturated. As it permeates the ACM, it adheres to individual fibers, locking them together and significantly reducing the likelihood of loose fibers becoming airborne during the removal process.

Foster® 40-30™ Fungicidal Protective Coating is a low-odor, fast-setting, water-based surfacing material specifically crafted for field or shop application to faced or unfaced fiberglass duct liner, fiberglass duct board insulation, or galvanized surfaces. This formulation is highly effective at preventing the growth of mold and odor-causing bacteria on its surface for an extended period of time.

Foster® Fos-Stik™ Adhesive 85-45 is a fast-tacking aerosol spray adhesive with low soak-in properties. It is employed for bonding various insulation materials to metal or other construction surfaces, offering quick adhesion and strong initial adhesive strength. This adhesive can be applied as either a one-way wet adhesive or a two-way contact cement.