Products

HydroArmor® 7740 is a sprayable, latex product that is designed for use on steel, aluminum, fiberglass, and plywood. This highly fire-resistant material can be easily sprayed onto overhead and vertical surfaces to seal joints. Heavy wet film builds can be applied without causing runs, drips, or sagging at bridge seams. Because this material is filled with hollow microspheres, this coating adds little weight to vehicle bodies, even at high film builds.

HydroArmor® 7755 is a sprayable latex coating designed for use on aluminum, fiberglass, cold-rolled steel, galvanized steel, and most metal primers. HydroArmor® 7755 is formulated to give very good corrosion protection when applied as thinly as 20 mils wet. This low viscosity, sag-resistant coating can be easily sprayed onto exposed underbody areas and into restricted areas such as tubing and "hidden" areas accessible only with spray wands. Wet film builds of 30 mils or more can be applied without runs, drips, or sags.

HydroArmor® 7770 is a water-based latex coating that provides lightweight and sound-dampening protection. It can be easily sprayed onto overhead and vertical surfaces to seal joints effectively. This coating is highly durable, even under the harshest service conditions. It is commonly used for lap sealing and sound deadening bonding to various materials such as cold-rolled steel, galvanized steel, stainless steel, primed steel, aluminum, fiberglass, and plywood. HydroArmor® 7770 belongs to the category of water-based coatings.

Foster® 40-20™ Fungicidal Protective Coating is a polyacrylate copolymer emulsion designed for long-term fungicidal effectiveness that remains active even as it ages. This formulation is highly effective at inhibiting the growth of mold and odor-causing bacteria on its surface. It offers a resilient, elastic, and decorative finish that accommodates movement without developing crevices where bacteria can lodge.

PC4426MODBK is a single-component, solvent-based primer designed to maximize the anchorage of subsequently applied adhesives to various surfaces, including metal, glass, concrete, ceramics, select plastics, and most rigid or semi-rigid substrates. Widely used across the Mining, Mechanical Rubber, Plastic Goods and Aeronautic industries, PC4426MODBK meets strict primer requirements for diverse applications. Common uses include treating metals for concrete tanks, conveyor belts, vats, and pipes before applying adhesive bonded protective sheet liners. It is also used for priming plastic radomes for conductive, anti-static, and rain erosion protective coatings.

Foster® Full Defense™ Fungicidal Protective Coating 40-25 is designed to eliminate any remaining mold and mildew after pre-cleaning contaminated surfaces. It also provides protection to various building materials, including unfinished wood, drywall, oriented strand board, metal, masonry, and more, safeguarding them from fungal growth.

Foster® 40-30™ Fungicidal Protective Coating is a low-odor, fast-setting, water-based surfacing material specifically crafted for field or shop application to faced or unfaced fiberglass duct liner, fiberglass duct board insulation, or galvanized surfaces. This formulation is highly effective at preventing the growth of mold and odor-causing bacteria on its surface for an extended period of time.

H.B. Fuller EV Protect 1000 is a sprayable water-based intumescent coating designed to add a layer of protection in case of a thermal event in a battery pack. When exposed to flames, the coating will create an insulative layer that prevents direct contact of the flames to the substrate’s surface. This layer provides insulation against the flames and helps slow heat transfer through the coated substrate. H.B. Fuller EV Protect 1000 is formulated to adhere to a variety of common battery pack substrates, including steel, aluminum, e-coat, and ABS plastic. This coating can be easily applied onto battery pack components, and wet film builds of 0.030" can be applied without runs, drips, or sagging.

Childers® Chil-Brate™ CP-25 is a water-based, fire-retardant, fibrated, asphalt-emulsion, weather barrier coating designed for applications over insulations on above-ground installations that operate under moderate to high-temperature conditions. This coating is "breathing," allowing vapors under pressure to pass through it. Once dry, the film becomes tough and durable, offering protection against atmospheric corrosives, chemical liquids, and fumes.

H.B. Fuller 20277 is a one-component, water-based fugitive adhesive and coating material designed for fast drying, clean machining, non-blocking, and excellent lay-flat and humidity resistance. It is suitable for spray, pattern, and extrusion applications and can be used to protect metals, fiberglass, contoured sheets, and other surfaces from weathering and discoloration during transportation.

HydroArmor® 7763 is a sprayable latex coating designed for use on aluminum, fiberglass, cold-rolled steel, galvanized steel, and most metal primers. It is formulated with additives to improve adhesion to oily metals. It provides very good corrosion protection, even when applied as thinly as 10 mils wet. This low-viscosity, sag-resistant coating can be easily sprayed onto exposed underbody areas and into restricted areas such as tubing and "hidden" areas accessible only with spray wands. Wet film builds of up to 20 mils can be applied without runs, drips, or sags.

H.B. Fuller EV Therm 601 is a one-component UV curable technology that is thermally conductive, flame retardant, and electrically insulative. This material provides an optimum coating with a minimum coating thickness of 150 microns and encapsulation protection for electronic assemblies and components. This material was designed to be thermally conductive and is recommended for use with heatsinks, heat spreaders, cold plates, cooling tubes, and other thermal dissipation applications.

Magik 40X25 is a premium quality, water-based, antimicrobial, and fungicidal protective coating. It prevents and eliminates residual mold and mildew from contaminated surfaces and protects various surfaces such as metal, GI, masonry, and wood from fungal growth. Formulated with a special type of synthetic resin and high-performance additives, Magik 40X25 is a low-odor coating designed to inhibit the growth and spread of odor-causing bacteria, mold, and mildew on multiple surfaces.

UltraShield AC 14 is a premium quality, single-component, flexible, acrylic-based waterproofing and protective coating ideal for roof and wet area applications. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.

UltraShield HY 17 is a premium quality, flexible, hybrid polyurethane-based waterproofing and protective coating ideal for roof, wet, and exposed surface applications. Upon full cure, it forms a tough, resilient, yet flexible coating. UltraShield HY 17 also provides chemical resistance against sulfates, chlorides, bacteria, oil, and common fuels.