Products

ElastiSeal® WSS-2M is a high-viscosity, non-drying, butyl-based sealer used for automotive weather strips. It is designed to prevent rust and seal doors, trunks, and liftgate flanges from air and moisture penetration. This pumpable sealer does not harden or gel over time, even at extreme temperatures.

H.B. Fuller EV Therm 601 is a one-component UV curable technology that is thermally conductive, flame retardant, and electrically insulative. This material provides an optimum coating with a minimum coating thickness of 150 microns and encapsulation protection for electronic assemblies and components. This material was designed to be thermally conductive and is recommended for use with heatsinks, heat spreaders, cold plates, cooling tubes, and other thermal dissipation applications.

Millennium Primer 240 is a rubber polymer-based primer used to prepare the surface of single-ply TPO and EPDM roofing membranes for improved adhesion to seam tapes, cover tapes, and flashing tapes. Primer 240 has been formulated with VOC-exempt solvents for use in regulated markets where other solvent-borne primers cannot be used. This primer does not react with atmospheric moisture, allowing it to be opened and resealed for use at a later date.

Millennium Surface Treatment is a spray, brush, or roller-applied compound developed for use with Millennium brand adhesives and sealants when bonding to difficult substrates such as plastic films, smooth APP modified bitumen membranes, very fresh non-oxidized (glossy surfaced) asphalt, or coal tar. Millennium Surface Treatment is a solvent-based product and is not fit for use in VOC-regulated markets such as California or the OTC states.

Swift® prime 1153 is a water-based primer formulated for PVC foils. This primer exhibits several beneficial properties, including being water-based, low in odor, and possessing high heat resistance. Additionally, it offers excellent wetting characteristics. It is based on a polyurethane dispersion and is presented in a white color. This primer serves as an effective foundation for enhancing the adhesion of PVC foils, ensuring optimal performance in various applications.

Millennium Single-Ply Primer is a rubber-polymer-based roofing primer. Unlike thin primers that run and puddle, the high-viscosity formulation promotes uniform coverage on both horizontal and vertical surfaces. Millennium Single-Ply Primer does not react with atmospheric moisture, allowing it to be opened and resealed for use at a later date.

UltraShield EMB 25 is a single-component, flexible, cold-applied, bitumen-modified acrylic-based waterproofing membrane. It is specially designed from a blend of special resin and rubber, reinforced with water-repelling fillers, mineral stabilizers, and a gelling agent. UltraShield EMB 25 is a highly elastic product that cures to a rubber-like membrane capable of withstanding severe expansion, contraction, and deck movements. It is highly resistant to oxidation, UV light, and ozone due to the unique additives used in its formulation, ensuring it does not crack.

UltraShield AC 11 is a high-quality, single-component, flexible, acrylic-based waterproofing and protective coating. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.

UltraShield AC 10 is a single-component, flexible, acrylic-based waterproofing and protective coating. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.

H.B. Fuller EV Protect 1000 is a sprayable water-based intumescent coating designed to add a layer of protection in case of a thermal event in a battery pack. When exposed to flames, the coating will create an insulative layer that prevents direct contact of the flames to the substrate’s surface. This layer provides insulation against the flames and helps slow heat transfer through the coated substrate. H.B. Fuller EV Protect 1000 is formulated to adhere to a variety of common battery pack substrates, including steel, aluminum, e-coat, and ABS plastic. This coating can be easily applied onto battery pack components, and wet film builds of 0.030" can be applied without runs, drips, or sagging.

Millennium Universal Primer is an all-purpose water-based primer designed for use with the entire Millennium family of products. The primer is easy to apply and requires no mixing. A red tint offers easy recognition of areas where the primer has been applied.

UltraShield AC 14 is a premium quality, single-component, flexible, acrylic-based waterproofing and protective coating ideal for roof and wet area applications. It is designed to provide a tough barrier against weathering agents and UV, and it also functions as an anti-carbonation coating. Upon full cure, the coating forms a tough, resilient, yet flexible barrier.