Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Application Instructions
- Suitable for use through standard application systems such as semi contact nozzle, slot nozzle, wheel and disk systems.
- Paper straw production using open pot with roller and scraper system.
- Cleaning Instructions: Whenever possible, adhesive residues should be washed off with cold water before it dries. Removal of dried adhesive may prove more difficult and will require warm soap water or with mechanically scratch.
- Approved Substrates
Paper sheet 100 – 120 g/m2, paper sheet 60 g/m2, with or without wet strength treatment. Before use, suitable tests are necessary.
- Typical Applications
Designed for paper straw manufacturing. Developed for applications where good water resistance of the final bond is required.
Properties
- Color (Properties)
- Typical Properties
Value Units Test Method / Conditions Film Elastic - - Viscosity (Sp3, at 20°C) approx. 3200 mPa.s Brookfield RVT pH approx. 5.5 - - Solids Content approx. 50 % - Density 1.05 g/cm³ -
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 6 Months
- Storage Information
Clean and dry conditions above +5°C and below +35°C. The adhesive pail or container must be kept hermetically closed to prevent air entry during storage. Once the container has been opened, ensure the lid is always replaced and the container kept closed during use.