Swiftmelt - Earthic 9010E - H.B. Fuller

Enhanced TDS

Identification & Functionality

Product Type: Hot Melt Nonreactive Adhesive,
Label
Technologies: Adhesives & Sealants
Product Families: Adhesives & Sealants — Bonding Technology
Hot Melt Nonreactive Adhesives
Adhesives & Sealants — Pressure Sensitive Adhesives, Tapes & Labels
Labels

Features & Benefits

Labeling Claims: Low Carbon Footprint (PCF),
Sustainable
Ready-to-Use Product Features: Good Adhesion,
Good Cohesion,
Good Machinability,
Indirect Food Contact Acceptable
Product Highlights: Swift®melt Earthic™ 9010E is a sustainable pressure-sensitive hot melt adhesive that contributes to the replacement of fossil-fuel resources by renewable feedstocks. Designed to help customers lower the overall CO₂ impact, this near carbon neutral* adhesive is produced in an ISCC+ certified facility and provides excellent adhesion at low temperatures. Suitable on a variety of sustainable substrates, Swift®melt Earthic™ 9010E wide range of requirements for the pressure-sensitive adhesive for label stock applications.

Produced in an ISCC+ facility, providing full supply chain transparency.

High share of fossil-free and sustainable raw materials (>70%).

Good adhesion to a wide range of substrates. including various types of plastic films (PE, PP, PET) or paper.

Excellent balance of adhesion and cohesion.

Wide range of applications from fridge up to 60°C.

Excellent machinability.

Non-direct food contact compliance.

Note: * - Final calculations pending.
Product Characteristics: excellent balance of adhesion and cohesion to a wide range of substrates

good adhesion at low temperatures

high share of fossil-free and sustainable raw materials (>70%)

Applications & Uses

Markets: Printing & Packaging
Applications: Printing & Packaging — Tapes, Labels & Adhesives
Tapes & Labels
Application Method: Roller,
Slot-Die
Compatible Substrates & Surfaces: Paper,
Polyethylene (PE),
Polyethylene Terephthalate (PET),
Polypropylene (PP)
Typical Applications: This grade has been developed for label stock production to be used for general purpose label application.
Application Instructions: Application: by slot die or roller coating at 150°C – 180°C (depending on the applicator type).

Properties

Typical Properties
Note: Typical values only, slight variations may occur but will not affect product’s meeting the standard technical parameters as stated; please consult our CoA for more details (available on request).

	Value	Units	Test Method / Conditions
Softening Point (R&B)*	82 - 98	°C	ASTM E28-99
Viscosity (Brookfield DV II, Sp27, 20rpm, at 160°C)*	5000 - 8000	mPa.s	-

Regulatory & Compliance

Packaging & Availability

Storage & Handling

Shelf Life: 12 months*
Storage Conditions: In original sealed packaging protected from sun, dust, moisture, and high temperatures. Clean and dry conditions above +15°C and below +25°C.