H.B. Fuller logo

Intrafol™ 1175

1 of 5 products in this brand
Intrafol™ 1175 is a solvent-based primer for PVC edges that is NEP, NMP, and toluene-free. It offers improved machinability and has a medium viscosity and medium drying time. It is used for adhesion promotion in edgebands and foils in the woodworking industry, including decorative edges and foils.

RTU Product Type: 2K (2 component) Coating, Primer, Solventborne Coating

Application Area: Decorative Edges, Furniture, Panels, Woodwork

Compatible Substrates & Surfaces: Composites, Polyvinyl Chloride (PVC), Wood

Features: Good Machinability, Good Paint Adhesion, Medium Viscosity

Application Method: Roll Coater

    Enhanced TDS

    Identification & Functionality

    RTU Product Type
    2K (2 component) Coating,
    Primer,
    Solventborne Coating
    Technologies
    Ready-to-Use Products
    Product Families
    Ready-to-Use Products — Paints & Coatings
    Primers & Sealers

    Features & Benefits

    Labeling Claims
    Benzene, Toluene, Xylene (BTX)-free,
    N-Methyl-2-Pyrrolidone (NMP)-free,
    Nonylphenol Ethoxylates (NEP)-free,
    Sustainable,
    Toluene-free
    Ready-to-Use Product Features
    Good Machinability,
    Good Paint Adhesion,
    Medium Viscosity
    Product Features
    • Contains polyvinyl chloride (PVC) for improved adhesive
    • properties
    • Free of BTX
    • Free of THF
    • Free of NEP
    • Fluorescent (for process control)

    Applications & Uses

    Markets
    Building & Construction,
    Consumer Goods
    Applications
    Building & Construction — Building Materials
    Wood
    Consumer Goods — Furniture
    Application Area
    Decorative Edges,
    Furniture,
    Panels,
    Woodwork
    Application Method
    Roll Coater
    Compatible Substrates & Surfaces
    Composites,
    Polyvinyl Chloride (PVC),
    Wood
    Processing Information

    Preparation

    • The surfaces to be bonded must be dry, free of grease, free of dust and free of oil.

    Processing

    • Apply a thin and homogenous coat of Intrafol™ 1175 on the plastic surface and dry the applied film. Refer to the technical data table regarding the Drying time. For new materials or applications, the suitability must be confirmed by preliminary tests.

    Properties

    Physical Form
    Liquid
    Typical Properties
    ValueUnitsTest Method / Conditions
    Density0.9g/cm³DIN EN ISO 2811-1
    Solid Content14%Internal HBF Standard
    Processing Properties
    ValueUnitsTest Method / Conditions
    Drying Time (at 70°C)20 - 30s-
    Processing Temperature15 - 25°C-
    Storage Temperature5 - 35°C-
    Viscosity (at 20°C)50sDIN 4, DIN EN ISO 2431
    Weight Per Unit Area (Wet)30 - 50g/m²-

    Technical Details & Test Data

    Processing Information
    Suitable Substrates

    Polyvinyl chloride (PVC)
    Suitable Adhesives

    Edge banding hot melts (e.g. EVA, APAO, reactive PUR)
    Consistency Liquid
    Surface Requirements Dry
    Free of grease
    Free of dust
    Free of oil
    Application Method Roller coating
    Application Equipment Doctor blade

     

    • Preparation - Intrafol™ 1175 must be stirred well before use
    • Frost protection Protect Intrafol™ 1175 strictly from frost, product will be damaged.

    Packaging & Availability

    Regional Availability
    • Europe
    • India/MiddleEast/Africa (IMEA)

    Storage & Handling

    Storage Information

    Intrafol™ 1175 should be used within the shelf life specified on the packaging. The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).