Advantra® BOLD 9480

1 of 33 products in this brand
Advantra® BOLD 9480 is a hot melt adhesive that has been developed for carton and folding box sealing and can be used for tray and case erection. Due to the fast build-up of cohesion (hot tack), it can withstand the restoring forces of boards and runs well on medium- to fast-EOL machines.

Product Type: Hot Melt Adhesive, Reactive Adhesive

Application Area: Cartons, Case Sealing, Folding Box, Trays

Compatible Substrates & Surfaces: Cardboards, Painted Surfaces

Application Method: Dauber Finger System, Nozzle, Roller

Features: Anti-Blocking, Excellent Substrate Adhesion, Fast Setting, Free Flowing, Freeze Resistant, Good Heat Stability, Grease Resistant, Heat Resistance, Hot Tack Strength, Migration Resistant, Odorless

Technical Data Sheet
  • TypeDocument Name
View All Documents

Enhanced TDS

Identification & Functionality

Features & Benefits

Applications & Uses

Markets
Applications
Application Area
Application Method
Compatible Substrates & Surfaces
Typical Applications
  • This product has been developed for carton and folding box sealing and can be used for tray and case erection.
  • Due to the fast build-up of cohesion (hot tack) it can withstand restoring forces of boards and runs well on medium to fast EOL machines.
  • It is well suited for extremely difficult to bond substrates such as varnished surfaces or metalized laminates as well as on reinforced light weight cardboards with grease resistance or migration barriers.
Suitable Substrates

Folding boxes, cartons and cases with very difficult to bond surfaces.

Application Instructions
  • Apply by nozzle; wheel-, disk-systems or Dauber finger system.
  • Application temperature: 150°C – 180°C
  • Open time: medium to short
  • Setting time: fast
  • This hot melt with new raw material base has stronger adhesion and a lower density than conventional hot melts based on EVA, which means an excellent bonding is reached at once with high mileage.
  • Due to this composition and the lower density the adhesive is not mixable with conventional hot melts. If other adhesives have been used before, the adhesive equipment has to be thoroughly cleaned.

Properties

Color (Properties)
Typical Properties
ValueUnitsTest Method / Conditions
FilmHard, elastic, dry--
Softening Point (Ring and Ball)approx. 102°CASTM E28-99
Density (at 23°C)approx. 0.96g/cm³-
Viscosity (Brookfield, Sp27, at 175°C)approx. 950mPa.sASTM D 3236-88

Packaging & Availability

Regional Availability
  • Europe (Excluding Russia)

Storage & Handling

Shelf Life
24 Months
Storage Conditions
  • In original sealed packaging protected from sun, dust, moisture and elevated temperatures.
  • Do not store above +35°C to received free-flowing advantage or loosen up in case of any agglomeration caused by differing transport conditions.