Products

H.B. Fuller Cor-Weld™ EC 9551 is an additive that is specifically designed for use with starch glue adhesive in the corrugating industry. It can be used with starches based on maize, wheat, and pea, and is compatible with all standard starch glue preparation systems as well as automatic dosage systems.

H.B. Fuller Fullbor™ WB 6364 is a liquid borate for starch glue adhesives. It increases the bonding properties and mechanical stability of the starch glue used for the corrugated board production. This product functions as a liquid alternative to borax powder.

H.B. Fuller CASEMATE WB 8921 P is a water-based adhesive with excellent adhesion on difficult to bond surfaces. This grade exhibits very good lay-flat properties along with very good machinability. It is easy to clean and has a high wet tack.

H.B. Fuller HL-3163 is a hot melt adhesive that bonds well to a variety of book binding substrates and has excellent heat resistance. This grade can be used in one-shot book binding and is applicable on most paper stocks used in book binding.

H.B. Fuller HYDROGRIP 20985 is a versatile waterborne latex cohesive adhesive that exhibits excellent adhesion to foams, clay-coated board, treated films, corrugated, and coated and uncoated papers. This product possesses excellent cohesive grab, superior aging properties along with non-blocking properties.

H.B. Fuller PA-1150-EN001 is a water-based adhesive designed for use in a variety of applications. This product is known for its excellent machining characteristics and high performance, making it ideal for a range of uses. It can be used on various substrates, including virgin or recycled kraft paper, ensuring optimal performance and durability.

H.B. Fuller Ipacoll™ PWC 3135 PB water-based adhesive that exhibits excellent adhesion on coated surfaces and foils. The product is specifically recommended for use on folding boxes, case sealings, as well as for window gluing in the packaging industry; especially used in the food industry as well as for deep freezing goods.

H.B. Fuller Lunatack™ B 208 is a hot melt adhesive developed for the perfect binding and gluing off brochures, paperbacks and book blocks in One-Shot System. This product is also used as main glue in the Two-Shot System with Full-Dri™ dispersion as primer.

H.B. Fuller Lunatack™ HL 3379 is a hot melt adhesive developed for the perfect binding and gluing off brochures, paperbacks and book blocks and in One-Shot and Two-Shot Systems. It can used as primer and as main glue in Two-Shot System.

H.B. Fuller EV Bond 343 is a medium-hardness, semi-flexible two– component polyurethane adhesive designed for bonding applications requiring resilient bonds, non-sag application and enhanced adhesion to flexible substrates. EV Bond 343 is suitable for bonding metals, ceramics, natural rubber, thermosetting polymers and select types of unprepared thermoplastic substrates such as ABS, polycarbonate and nylon.

H.B. Fuller EV Bond 383 is a thixotropic, toughened, two-component, ambient-curing epoxy adhesive. High impact resistance, moderate cure speeds, and good peel resistance characteristics make this system suitable for assembly or sealing of reinforced composite structures, metal bonding, or other applications where a toughened epoxy adhesive is required. This system contains dyes that fluoresce brightly with exposure to UV inspection lamps (black light).

H.B. Fuller EV Bond 420 is a high-performance, two-part acrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. EV Bond 420 greatly increases the reliability of finished assemblies, its ability to withstand extreme temperature fluctuations, and its resistance to a wide range of chemicals and environmental conditions. EV Bond 420GB allows control of the adhesive gap to a diameter of 0.25mm (0.01").

H.B. Fuller EV Protect 300 is a two-component, low viscosity polyurethane encapsulating system that is designed for potting and encapsulating of battery cells in battery modules. This product offers battery designers the ability to enhance safety and protection from thermal propagation.

H.B. Fuller EV Protect 4006 is a liquid-applied, two-component, flame-retardant, low-density polyurethane foam material designed for the potting and encapsulation of battery cells in EV battery modules. EV Protect 4006 SFR offers battery design engineers the ability to increase the power density of their modules while enhancing safety and protection from thermal propagation. The ultra lightweight nature of the EV Protect 4006 SFR minimizes the weight impact to the battery modules. The semi-structural properties of the material also provide noise, vibration, and harshness benefits to the battery system by unitizing the battery module and absorbing external environmental impacts.

H.B. Fuller EV Protect 5006 offers battery designers the ability to integrate high-level structural performance characteristics into their battery system, which is ideal for cell to pack applications. This ultra-lightweight material minimizes weight addition to the battery pack and, when exposed to a thermal event, significantly reduces or delays thermal propagation. With a reduced viscosity and improved curing speed, the EV Protect 5006 is especially advantageous for those with unique, complex, or intricate battery design architecture. Works in all types of battery cell form factors (cylindrical, prismatic, or pouch).

H.B. Fuller EV Seal 200 is an MS polymer system that can be used for 1K moisture curing or a 2K accelerated cure option. Fast skin-over and green strength at room temperature. The product shows superb mechanical properties and provides unparalleled levels of sealing and resistance. Suitable for adhesion to a wide range of substrates like plastics, metals, and composite materials.

H.B. Fuller EV Seal 500 is a thermal plastic hot melt PSA designed for use in gasketing and sealing applications. It is especially suitable for sealing battery pack modules where accessibility and serviceability are a high priority. With the resealable nature of this material, repeated opening and closing of a battery enclosure is simple, easy, and reliable. The EV Seal 500 offers a robust solution for preventing dust and moisture intrusion into any enclosure. This material is recommended for use with steel, aluminum, and cast iron.

H.B. Fuller EV Therm 288 is a silicone-free gap filler, formulated exclusively for EV battery environments. This thermal interface material cures at room temperature or is accelerated with heat and provides excellent thermal conductivity, electrical insulation, water resistance, corrosion resistance, and impact resistance properties.