Power, Water & Utilities

Foster® 40-20C Protective Coating offers a resilient and decorative finish that accommodates movement without creating spaces for bacteria to lodge. This cost-effective coating is resistant to various industrial chemicals and provides long-lasting protection. It is suitable for application on walls, ceilings, pipes, both interior and exterior surfaces of HVAC duct systems, and in areas where effective controls are required.

Foster® 40-20™ Fungicidal Protective Coating is a polyacrylate copolymer emulsion designed for long-term fungicidal effectiveness that remains active even as it ages. This formulation is highly effective at inhibiting the growth of mold and odor-causing bacteria on its surface. It offers a resilient, elastic, and decorative finish that accommodates movement without developing crevices where bacteria can lodge.

H.B. Fuller Core Adhesive 950 is an acrylic adhesive that is surfactant stabilized. It is a premium acrylic adhesive with excellent adhesion, improved water resistance, and excellent shear strength. It does not contain reportable formaldehyde. It is commonly used as a flexible ducting core adhesive in construction applications.

Isapur™ 2072 / Köracur TH 650 are liquid-reactive 2-component polyurethane adhesives. It is a low-viscosity, fast-curing system specifically designed for potting metal and plastic frames. This adhesive is commonly used in applications such as frame potting for air filtration purposes.

HS Butyl 0361 Water Tank Tape is a high-performance butyl tape laminated with a hard closed-cell PVC foam backing. It has been designed for sealing flange joints in GRP sectional water tanks, up to a maximum tank height of 4 metres. The tape is conformable, easy to use, offers excellent adhesion to multiple substrates, and provides a ready-to-use solution for various sealing applications where durability and effective bonding are required.

HS Butyl 0361 is a high-performance butyl available as a tape or in drums for versatile applications. It is used for sealing joints where the tape will be in contact with potable water and bonding and sealing water shedders to car doors. The product offers excellent adhesion to multiple substrates, is conformable, easy to use, and has good resistance to raw sewage.

HS Butyl 2239 is an extruded butyl tape designed for a variety of sealing applications, including compression joints and seams, vehicle construction, membranes, and ridge tiles. It offers excellent adhesion to multiple substrates and is conformable for easy application. This ready-to-use tape also provides good UV resistance, making it suitable for outdoor and exposed environments.

HS Butyl 0372 is an extruded butyl tape laminated with a fixed polyethylene liner, designed for sealing joints in ducting. It is a high-performance tape that offers very high tack, good adhesion, and ease of use, making it suitable for applications requiring reliable and durable sealing.

Tonsan MS1937 is a high quality, neutral, elastic single component adhesive/sealant based on MS-Polymer, which cures by reaction with moisture to an elastic product. The skin formation and curing time are dependent on humidity and temperature, and the curing time also depends on joint depth. By increasing the temperature and moisture these time can be reduced; low temperature as well as low moisture retard the process. MS1937 is a good compromise between an adhesive and a sealant based on MS-Polymer. MS1937 is suitable for elastic seal which also high strength is required. MS1937 is odourless and free of solvents, isocyanates, silicones and PVC. It demonstrates good adhesion without primer to many substrates and is compatible with suitable paint systems. The adhesive/sealant also demonstrates good UV resistance and therefore can be used for interior and exterior applications.

Tonsan TS805 High Strength Structural Adhesive is a two components, room temperature curing, 1:1 mix ratio by volume, methacrylate adhesive system. Cured layer has high toughness and good resistance to peeling off. Fixture time is 30 minutes. With good thixotropic property. The product is suitable for bonding a variety of substrates with a minimum of surface preparation.

H.B. Fuller GI9633 is a two-part methacrylate adhesive designed for structural bonding of metals, plastic, and composite materials without surface preparation. Combined at a 1:1 ratio, it has a working time of 20 to 40 minutes and achieves approximately 50% of ultimate strength in 3 hours at 23°C. This product has designed for use on large structures where a moderate open time is needed. In addition, this product provides a unique combination of excellent fatigue endurance, outstanding impact resistance, and super toughness.

HS Butyl 0303 is a general-purpose butyl tape used for sealing applications. It is suitable for sealing lap joints in roofing and cladding systems, duct flanges in HVAC systems, compression joints and seams, and caravans, offering excellent adhesion to multiple substrates. The tape is conformable, easy to use, and designed as a ready-to-use product for various sealing needs.

HS Butyl Foilband 0316 is a butyl tape laminated with a fixed polyethylene (PE) foil backing, designed for sealing applications, such as use as a flashing tape in conservatory construction, over-sealing or repair of joints in gutters and downpipes, and sealing over T-bars in glazing and conservatories. It offers high tack, good adhesion, and is conformable for easy application, providing an effective and durable sealing solution for various sealing applications.

H.B. Fuller FE-7258 is an odorless epoxy system with low viscosity, ideal for bonding the outer wrapping of reverse osmosis filters. It penetrates glass filaments quickly and effectively due to its low viscosity. This component appears light yellow and has a mild odor.

H.B. Fuller Jacket Adhesive 250 is a carboxylated acrylic adhesive that is surfactant stabilized. It is a premium acrylic adhesive known for its excellent adhesion, improved water resistance, excellent flame retardance, and fast drying properties. It is commonly used as a flexible ducting jacket adhesive in the construction industry.