Products

Apollo Roofing InsuBond Spray-Applied Insulation Adhesive is a spray-applied insulation adhesive featuring a reactive chemistry and moisture-curing polyurethane. It is designed for precise, professional, and quick application through spraying, aiming to minimize project costs. The adhesive allows for controlled application, resulting in a smooth finish. It is suitable for the professional and efficient bonding of a wide range of insulation boards to the AVCL (Air and Vapor Control Layer) or directly to the deck. Additionally, it is an excellent choice for insulation and coverboard adhesives.

Magik 8560 is a UL Classified, zero VOC, premium quality water-based adhesive with high tack and rapid setting. It is formulated with a special type of synthetic resin, high-performance additives, fine grade mineral fillers, and tackifiers. Magik 8560 is non-flammable when wet, fire-resistant when dry, and highly antibacterial.

Apollo Roofing InsuBond High-Foaming Insulation Adhesive is a high-foaming insulation adhesive formulated with reactive chemistry and a 2-part polyurethane system. It is specifically designed for bonding mineral wool and foam glass, making it ideal for foil-to-foil bonding applications. This adhesive cures at low temperatures. It is suitable for bonding a range of insulation boards to the AVCL (Air and Vapor Control Layer) or directly to the deck. Additionally, it is an excellent choice for insulation and coverboard adhesives.

H.B. Fuller HL2278 is a solvent-free, UL-recognized spray-grade hot melt adhesive for bonding insulation to painted and unpainted metal. It contains no fillers and provides improved spray characteristics over filled adhesives. Excellent for bonding insulation to painted and unpainted metal and galvanized metal.

Tuskbond Foaming Insulation Adhesive - 22L Canister is a one-part, sprayable, foaming polyurethane adhesive specifically designed for bonding a wide range of insulation materials to a variety of different substrates. It has been developed to quickly and precisely deliver a bead of polyurethane foam, drastically reducing the time taken to install insulation.

H.B. Fuller HL6369 is a hot melt adhesive that has a long open time, excellent hot tack, and high as well as low temperature resistance. It shows good adhesion to metal and is suitable for bonding fiberglass insulation to metal as well as many other general assembly applications. This product has good initial handling strength and reaches its ultimate strength in about 72 hours.

Magik 8110 is a UL Classified, premium quality, single-component, synthetic rubber-based adhesive with special additives and tackifiers. It is a rapid-setting synthetic elastomer adhesive designed for use with fibrous glass insulation, duct wrap, and acoustical linings for air handling units.

Magik 555 LV is a specially developed, low VOC, air-drying contact adhesive that excels in bonding seams and butt joints of pipes and sheet insulation. It can also be used to bond sheet insulation to flat or curved metal surfaces.

Millennium PG-1 Pump Grade (Low Viscosity Insulation) Adhesive is a two-component, essentially VOC-free, all-purpose, low-rise, polyurethane foamable adhesive that contains no solvents and sets in minutes. The application process is quick and easy, resulting in significant labor savings for the contractor. Millennium PG-1 Pump Grade Adhesive is dispensed through the Patented Millennium Cyclone Low Pressure Pump Cart* (by Garlock) or an approved low pressure pump cart that equally mixes Part 1 and Part 2 of the adhesive, providing a quality, consistent application each time.

Apollo Roofing InsuBond Solvent-Free Insulation Adhesive is a solvent-free insulation adhesive formulated with reactive chemistry and moisture-curing polyurethane. It is designed to bond a wide range of insulation boards effectively. This adhesive is solvent-free, non-flammable, and low-odor, providing a user-friendly liquid application. It can be easily applied in beads using a tin. This adhesive is suitable for bonding a wide range of insulation boards to the AVCL (Air and Vapor Control Layer) or directly to the roof deck. Additionally, it is an excellent choice for insulation and coverboard adhesives.