Products

Childers® Chil-Perm® CP-30 Low Odor Vapor Retarder Coating is a highly effective coating designed for low-temperature applications. It has a unique consistency in its wet state, making it suitable for heavy or thin film applications. This coating is formulated with an elastomeric resin, resulting in a tough and flexible dry film with strong adhesive properties.

Foster® Eclipse™ Coating 40-11 is a low-odor, fast-setting, water-based surfacing material designed for field or shop application to faced or unfaced fiberglass duct liner or fiberglass duct board insulation. Its low viscosity enables application with a wide range of spray equipment available in the market.

Foster® Insulfas™ 31-31 Coating is a durable, light-colored coating designed for indoor applications on thermal insulation. It is also used to cement laps of canvas or glass-lagging cloth. This coating offers protection for insulation on air conditioning ducts and cold water piping. The effectiveness of this finish system relies on applying it over adequate insulation to ensure that, under operating conditions, the surface temperature remains above the dew point temperature.

Childers® CP-34 Vapor Retarder Coating is a water-based coating designed for use over various thermal insulation materials, including polystyrene foam. It serves as an excellent choice for creating a vapor-retarding seal on ASJ, FRK, and FSK jackets and board facings, particularly at joints, laps, and weld pin punctures.

Childers® Chil-Lag® CP-52 Lagging Adhesive / Coating is a white, water-based formula designed for easy and smooth brushing. It effectively bonds and forms a durable film when used with glass or canvas lagging cloth. When applied over insulation, it acts as a protective coating and helps prevent the release of fibers from bare fibrous insulation.

Childers® Chil-Out™ CP-33 Vapor Retarder Coating is a water-based solution for interior and exterior insulation, HVAC ducts, and low-temperature equipment. It dries quickly to form a durable, flexible film, safeguarding insulation and inhibiting vapor flow. Its smooth consistency allows for easy application in varying thicknesses.

Foster® Fire Resistive Anti-Abrasion Coating 30-16 is a high-solids, water-based, fire-resistive bore coating designed for the inner surfaces of cellular glass, rigid polyurethane, urea-formaldehyde, or polyisocyanurate foam insulation. Its purpose is to minimize abrasion caused by vibration and temperature fluctuations in piping or vessels. This coating exhibits strong adhesive properties across a broad temperature range, making it suitable for extremely low-temperature and dual-temperature equipment.

Foster® H.I. Mastic® 90-07 is a durable protective weather coating specifically designed for outdoor use over thermal insulation when an economical breathing mastic is needed. This asphalt emulsion product is crack-resistant, even at critical right-angle bends during curing. It exhibits exceptional weathering stability, resulting in a firm and durable surface that withstands acids, alkalies, abrasion, and typical outdoor industrial conditions.

Childers® ENCACEL® X CP-40 Vapor Retarder Coating is an elastomeric, polymer-based coating primarily created to safeguard thermal insulation. In addition, ENCACEL® X CP-40 exhibits outstanding chemical resistance, further enhancing its durability and performance. Moreover, this coating serves as an effective weather barrier, safeguarding insulation and maintaining its integrity even in challenging weather conditions.

Foster® 40-20C Protective Coating offers a resilient and decorative finish that accommodates movement without creating spaces for bacteria to lodge. This cost-effective coating is resistant to various industrial chemicals and provides long-lasting protection. It is suitable for application on walls, ceilings, pipes, both interior and exterior surfaces of HVAC duct systems, and in areas where effective controls are required.

Foster® Monolar® Mastic 60-91 is a durable and flexible elastomeric finish specially formulated to protect outdoor thermal insulation. This coating contains chlorosulfonated polyethylene rubber. It serves as an effective vapor retardant for low-temperature insulation applications on tanks, pipelines, vessels, ductwork, and fittings.

Foster® Vapor-Out™ Coating 30-33 is a water-based vapor retarder coating designed for insulation, suitable for interior and exterior applications. It is particularly useful for low-temperature and some dual-temperature scenarios, including chilled water and refrigerated pipelines, HVAC ducts, and low-temperature equipment. This coating dries quickly, creating a resilient, flexible, and dry film that safeguards insulated surfaces and hinders vapor flow through the insulation system.

Foster® Sealfas® 30-36 HF™ Coating is a halogen-free, white, fire-resistant indoor coating designed for thermal insulation. It also functions as an adhesive for canvas and glass-lagging cloth. With excellent brushing characteristics, it ensures better coverage and uniformly coated surfaces. This coating maintains a neat white finish and does not yellow or discolor with age. The surface can be easily cleaned to remove grease, oil, soot, and other dirt accumulation.

Foster® Weatherite™ Mastic 46-50 is a fibrated, water-based breather mastic with a smooth, thixotropic consistency for easy application. It boasts a bright white color, is non-flammable when wet, and emits a mild odor during use. This mastic exhibits excellent brush, trowel, and spray properties.

Childers® Chil-Pruf™ CP-22 Insulation Coating is a reliable asphalt-based cutback coating reinforced with fibers. It is designed as a vapor retarder coating, typically applied over insulation materials on piping and equipment that operate at low to moderately high temperatures. When applied correctly, Chil-Pruf™ offers protection against atmospheric corrosives, chemical dust, fumes, fogs, and moisture.