Products

Tuskbond Infusion 701 - 22L Canister is a specially developed spray adhesive designed to hold reinforcing fibres in place during the infusion process of Resin Transfer Moulding. The super-fast drying time ensures that layers can be built up with minimal time waiting for the adhesive to dry. Tuskbond Infusion 701s unique pebble spray technology covers areas fast and provides a flat bonding surface in seconds.

H.B. Fuller TL0600 A/B is a 2K urethane with an amber color and high viscosity. H.B. Fuller TL0600 A/B is commonly used for potting filters and applications where the adhesive is exposed to blood. Its uses also include filter potting.

Tuskbond ONE Gold - 500ml Aerosol is a fast-drying, versatile, sprayable contact adhesive, suitable for bonding or sealing a wide range of products. The adhesive provides a heavier adhesive coat, good temperature resistance and a long open time. Tuskbond ONE GOLD is ideal for permanent bonds that require good initial bond strength. It provides an aggressive, fast, strong and permanent water resistant bond. ● https://youtu.be/6tNwrU1wE8A?si=lXb-hVCwlR4ZaqMi

Advantra® Combi Spout is a hot melt adhesive that has been approved for spout bonding on SIG Combibloc sleeve material. The adhesive shows very good bonding performance even at lower storage temperatures. It ensures superior bonding, thermal stability, clean machining, and a low total cost of ownership.

H.B. Fuller FH3911 A/B is a two-component adhesive and encapsulant widely used in casting applications. It belongs to the urethane chemical family and exhibits a transparent color. This product offers various features and benefits, including biocompatibility, clarity, low outgassing, low viscosity, and optical clarity. It is suitable for multiple application areas, such as potting compounds in electrical and electronics packaging and assembly, as well as printed circuit boards (PCBs).

Tuskbond EPDM Contact Adhesive - 22L Canister has been specifically designed for the bonding of EPDM roofing membranes to a variety of surfaces. The sprayable nature of the product offers a quick and clean alternative to traditional ‘pour on and roll out’ contact adhesives, completely eliminating wasted adhesive. Each canister will cover 130m² and, once applied, is ready to bond within minutes.

Tuskbond PU-01 - 22L Canister is a one-part, sprayable polyurethane adhesive. The product is moisture curing giving an extremely strong, waterproof bond. The web spray pattern allows substrates to be covered quickly. Tuskbond PU-01 has exceptionally high heat resistance and is protected against plasticiser migration.

Tuskbond Infusion 305 - 500ml Aerosol is a sprayable adhesive developed for bonding foam to itself and to timber during the construction of foam plugs. The adhesive is quick to apply and fast drying so plugs can be built quickly. The adhesive is very tacky and can be used as a one or two way stick depending on the strength of bond required.

Flextra® SFA 8202 + XR 1285 / XR 1282 / XR 1792 is a modular solvent-free adhesive system based on reactive chemistry. It offers a wide application spectrum due to multiple co-reactant options and features fast PAA (Primary Aromatic Amine) decay, making it suitable for medium- to high-performance applications and adhesion to wide varierty of films. It is an epoxy-silane-free system, providing additional benefits.

Tuskbond NC101 - 500ml Aerosol is a non-chlorinated sprayable contact adhesive developed to bond a wide variety of substrates. It has excellent grab and a long open time, providing a strong and permanent waterproof bond. It is ideal for permanent bonds that require good initial bond strength. It provides good temperature resistance and, if protected from contamination, has an open time of several hours.

Cyberbond 7005 is a high-purity octyl cyanoacrylate adhesive. It is used in tissue and wound management, as well as skin closure and wound care, in the medical market. This product also meets the following standards: EN ISO 9001:2015, IATF 16949:2016, EN ISO 13485:2016, and EN ISO 14001:2015.

Full-Care® 6202 is a hot-melt adhesive that enables up to 20% cost savings in use. It offers high peel strength for all back sheets and can be used with various application methods. This adhesive is commonly used in the manufacturing of feminine care products, adult incontinence items, and for positioning purposes.

Tuskbond XPR0 FR - 22L Canister is a fire-rated multipurpose sprayable contact adhesive ideal for bonding a wide variety of substrates. XPR0 provides incredible grab, high bond strength and excellent heat resistance. It is easy to apply and combines a long open time with a fast drying time. XPR0’s unique solvent system provides high performance with lower health hazards compared to traditional Non-Chlorinated alternatives. ● https://youtu.be/-VOa8H8if_s?si=FHJknwsAOp4M6HjJ

Swift®lock 4780 is a polyurethane-based reactive hot melt adhesive designed for versatile applications. It offers a brief open time, rapid setting, and strong initial bonding. Once cured, it exhibits excellent resistance to cold, heat, and humidity, along with impressive mechanical properties. This adhesive is particularly suited for coating PVC window profiles with PVC foils, ensuring reliable performance and durability for your adhesive needs.

Tuskbond Infusion 707 - 500ml Aerosol is a mist spray adhesive developed to hold reinforcement fibres in place during RTM applications. The specially developed mist spray pattern provides a soft, non-dimpling glue line that is perfect for areas that need to maintain a smooth, aesthetic finish and won’t soak into fibres. It also maintains its tack which allows reinforcements to be repositioned if needed.