Products

Foster® Cryogenic Vapor Stop Sealant 90-66 is a two-part elastomeric sealant designed for cryogenic applications as a vapor stop sealant. It is suitable for use with various insulation materials such as polyurethane foam, polyisocyanurate (PIR) foam, cellular glass, fibrous glass, aerogel, and other rigid and flexible insulations. This sealant is compatible with aluminum, stainless steel, metals, wood, and masonry construction materials.

Childers® Chil-Out™ CP-33 Vapor Retarder Coating is a water-based solution for interior and exterior insulation, HVAC ducts, and low-temperature equipment. It dries quickly to form a durable, flexible film, safeguarding insulation and inhibiting vapor flow. Its smooth consistency allows for easy application in varying thicknesses.

Foster® High Velocity Duct Sealant 32-14 is a fast-setting, elastomeric compound designed for sealing joints in high-velocity air conditioning ducts installed indoors. It can be used with or without reinforcing tapes, offering a mild "paint type" odor and clean application without stringing. Mechanical fasteners are required to ensure duct system rigidity.

Foster® Duct-FAS™ Duct Sealant 32-19™ is a fire-resistant, UV-resistant, water-based sealant designed for use on low, medium, and high-velocity ducts. It creates a highly flexible and durable seal to prevent air leakage. This sealant is provided in a unique thixotropic consistency, making it easy to apply using various methods such as a brush, glove, trowel, power extrusion, or caulking gun. It is suitable for both indoor and outdoor applications.

Foster® Spark-Fas® Adhesive 85-20™ is a rapid-setting, non-flammable, fire-resistant synthetic elastomer adhesive. It is specifically utilized for bonding duct wrap, fibrous glass, or mineral wool insulations with densities of up to 6 lbs. to galvanized steel and aluminum air conditioning or hot air ducts. This adhesive is chosen when a fire-resistive dry film is necessary. It contains non-flammable chlorinated solvents, eliminating the risk of explosions and fires during the application process.

Foster® Cryogenic Adhesive 82-77 is a chemically curing adhesive with the capability to achieve high tensile strength and adhesion at room temperature. It effectively bonds to a range of surfaces, including metal, wood, and masonry. This adhesive is supplied in a virtually 100% solids form, facilitating immediate bonding for non-porous surfaces without the risk of solvent entrapment issues.

Foster® Full Defense™ Fungicidal Protective Coating 40-25 is designed to eliminate any remaining mold and mildew after pre-cleaning contaminated surfaces. It also provides protection to various building materials, including unfinished wood, drywall, oriented strand board, metal, masonry, and more, safeguarding them from fungal growth.

Foster® Protektor® Sealant 32-22 is a single-component encapsulation coating designed for the abatement of asbestos fiber fallout, using the retention method. This sealant is formulated to penetrate deeply into asbestos-containing materials and, upon drying, transforms into a sturdy, lightweight surface that is resistant to damage. It serves as a crucial tool for effectively containing and stabilizing asbestos materials, reducing the risk of fiber release and ensuring safer environments.

Childers® Chil-Brate™ CP-25 is a water-based, fire-retardant, fibrated, asphalt-emulsion, weather barrier coating designed for applications over insulations on above-ground installations that operate under moderate to high-temperature conditions. This coating is "breathing," allowing vapors under pressure to pass through it. Once dry, the film becomes tough and durable, offering protection against atmospheric corrosives, chemical liquids, and fumes.

Foster® Vapor-FAS™ WB Coating 30-65™ is a cost-effective, fire-resistant vapor retardant coating designed for various thermal insulation applications, including polystyrene foam. It is particularly well-suited for providing a vapor retarder seal at joints, laps, and weld pin punctures on ASJ, FRK, and FSK jackets and board facings.

Foster® Drion® Contact Cement 85-75 is a fast-setting, water-resistant adhesive for sealing the laps of vapor barrier jackets and is also used for bonding materials to a variety of surfaces in applications where immediate adhesion and high initial adhesive strength are required.

Childers® CP-126 Adhesive is a high-quality, fast-tacking, water-based adhesive specifically created for attaching HVAC and commercial mechanical insulation. Additionally, it can be used as a contact bond adhesive by applying it to both surfaces. This application method is particularly suitable for situations where water entrapment may be a concern, such as when bonding polystyrene or rubber foam to metal surfaces.

Childers® Chil-Joint® CP-70 Sealant is a cost-effective joint sealant designed for use in various insulation systems, including low-temperature, dual-temperature, and some high-temperature applications. This sealant is non-shrinking and non-drying, ensuring long-lasting performance. It is also available in caulking tubes for application with hand or power caulking guns.

Foster® 81-84NH Non-Halogenated Adhesive/Sealant is a two-component, high-strength thermosetting urethane adhesive that does not contain flammable solvents or halide-based components. This adhesive is specifically formulated for bonding various types of low-temperature insulation materials to each other as well as to metal and masonry substrates, including stainless steel.

Childers® CP-129 Adhesive is a high-performance adhesive formulated for duct liner and insulation applications. It is known for its aggressive and fast-tacking properties, making it ideal for use with brush or air-atomized spray equipment. When applied via spray, it creates a spatter or web-like pattern, enabling an efficient and high coverage rate during application.