Products

TEC® Multipurpose Primer TA-560 is an acrylic latex-based primer designed for use with TEC® self-leveling underlayments. It can also facilitate the bonding of other TEC® surface preparation products and latex-modified thin-set mortars to challenging substrates like metal, glazed ceramic tile, gypsum-based underlayments, and concrete treated with specific types of curing compounds (silicate or acrylic resin curing compounds only). It's also effective for priming resin and metal backings on natural stone, allowing for installation with latex-modified thin-set instead of epoxy mortar. Additionally, it can promote bonding over cold-rolled steel substrates.

H.B. Fuller TS846 is a two-component polyurethane adhesive known for its strong bonding strength, good water resistance, and corrosion resistance. It is specifically designed for bonding composite materials and wood angle assembly. This adhesive is commonly used in window frames and fenestration applications.

Millennium Hurricane Force® 1-Part Membrane Adhesive is a highly elastomeric, one-part asphalt-modified urethane adhesive that is solvent-free and does not require mixing. The VOC content of the adhesive is less than 250 g/L. Millennium Hurricane Force® 1-Part Flashing Adhesive is approved for use in VOC regulated markets such as California and the OTC States.

Apollo Roofing MemBond Bituminous Membrane Adhesive is a bituminous membrane adhesive formulated with reactive chemistry and moisture-curing polyurethane. It is specifically developed for flame-free RBM (reinforced bituminous membrane) installations. This adhesive offers fast curing, high tack development, and one-way stick properties. It can be easily applied using a tin. It is designed for securely bonding bituminous membranes to various substrates, making it suitable for flame-free RBM installations. Additionally, it is an excellent choice for modified bitumen membranes and flashing adhesives.

Apollo Roofing InsuBond Spray-Applied Insulation Adhesive is a spray-applied insulation adhesive featuring a reactive chemistry and moisture-curing polyurethane. It is designed for precise, professional, and quick application through spraying, aiming to minimize project costs. The adhesive allows for controlled application, resulting in a smooth finish. It is suitable for the professional and efficient bonding of a wide range of insulation boards to the AVCL (Air and Vapor Control Layer) or directly to the deck. Additionally, it is an excellent choice for insulation and coverboard adhesives.

GSSI® MB-10A Sealant Tape is a hot-melt butyl tape. It offers superior cohesive and adhesive strength and withstands extreme roof temperatures. It also has excellent low-temperature compressibility and is resistant to cold flow and UV light. The sealant remains unaffected by building movement. It has a wide service temperature range and is available in various sizes and lengths. MB-10A is designed for metal buildings and meets sealing requirements for window glazing, air conditioning, and refrigeration. It is extruded on silicone-coated paper for easy application. The tape comes in different sizes and lengths, securely packaged in cartons for storage and export in metal roofing applications.

Millennium EPDM Semi-Cured Cover Strip is a construction adhesive that consists of a semi-cured EPDM membrane that has been laminated to a 25-mil EPDM-based pressure-sensitive tape. This tape is comprised of vulcanized rubber adhesive that will provide OEM-quality performance for EPDM single-ply restoration projects.

EternaBond® AlumiBond™ is a high-quality adhesive tape known for its durability and excellent UV stability. It does not require a primer for application, making it convenient to use. EternaBond® AlumiBond™ falls under the category of pressure-sensitive adhesives, tapes, and labels, specifically tapes. It is commonly used in various applications such as roofs.

Millennium One Step™ Pneumatic Applicator is designed to be used with Millennium One Step™ Adhesives and Sealants. The applicator uses compressed air to drive the pistons and can deliver a maximum thrust of approximately 1,500 pounds. The One Step™ Pneumatic Single Bead Applicator must be used with an air compressor (not included).

H.B. Fuller PD0124 is a vinyl acetate-acrylic copolymer adhesive that is surfactant stabilized. It offers excellent binding strength, good water resistance, and excellent pigment binding properties. It also provides good scrub resistance and low-temperature touch-ups. It is commonly used in dust control and soil stabilization as well as interior coatings in the construction, architectural, and specialty coatings industries.

Apollo Roofing RoofPrime Fast-Drying PVC Primer is a fast-drying PVC primer based on solvent-based polyurethane. It is specifically designed to improve the adhesion between PVC membranes and liquid roofing systems, promoting the longevity of the roof. This primer is easy to apply using a brush or roller. It is used for improving the adhesion properties between PVC-based membranes and liquid roof coatings in liquid-applied membrane systems.

Childers® AK-Cryl™ CP-9 Weather Barrier Coating is a polymeric, water-based, breather-type mastic designed for weather protection. It also offers defense against mechanical damage caused by external forces like impact and abrasion as well as internal forces such as thermal expansion, contraction, or vibration when used in conjunction with a reinforcing membrane. This product can additionally safeguard insulation from chemical attacks by acids, alkalis, and solvents. This coating is fire-resistant and UV-stable.

Plyamul® 303 is a vinyl acetate adhesive that is surfactant stabilized and offers high tensile strength and excellent pigment binding properties. It is commonly used in ceiling tiles, color chips, and dust control applications in the architectural and specialty coatings industry.

KALAR® 5275 is a partially cross-linked butyl rubber compound pelletized for easy handling. KALAR® products feature all the performance attributes expected of butyl rubber. KALAR® 5275 is amber in color and is among the tightest cross-linked butyl rubbers of the KALAR® products. It is designed as the starting point for applications that require the maximum resistance to creep and slump. KALAR® 5275 provides good resistance to flow at high temperatures.