Enhanced TDS
Identification & Functionality
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Segment
- Usage Instructions
- Mix well at room temperature, the contents of the adhesive container before removing material.
- For optimum mixing and mix ratio accuracy, we recommend that batch sizes be not smaller than 25 grams and that the weighing tolerances be within ±5%.
- Add the designated activator to the preweighed adhesive and mix thoroughly.
- In some applications, warming the substrate to 120°F will aid the flow during application. Cure as indicated.
Properties
- Cured Properties
Value Units Test Method / Conditions Specific Gravity 2.7 - - Hardness 91 - Shore D Volume Resistivity (after heat aging at 160 °F) 0.002 ohm-cm - Volume Resistivity (after heat aging at 160 °F, 3 months) 0.003 ohm-cm - Volume Resistivity (after heat aging at 160 °F, 6 months) 0.003 ohm-cm - Volume Resistivity (after heat aging at 200 °F, 3 months) 0.006 ohm-cm - Volume Resistivity (after heat aging at 200 °F, 6 months) 0.03 ohm-cm - Volume Resistivity (after heat aging at 250 °F, 3 months) 0.07 ohm-cm - Volume Resistivity (after heat aging at 250 °F, 6 months) 0.09 ohm-cm - Weight Loss after Six Months (at 200 °F) 0.09 % - Weight Loss after Six Months (at 250 °F) 0.21 % - Bond Strength to Aluminum (at -65 °F) 1800 psi - Bond Strength to Aluminum (at 75 °F) 1800 psi - Bond Strength to Aluminum (at 160 °F) 1900 psi - Bond Strength to Aluminum (at 200 °F) 2300 psi - Bond Strength to Aluminum (at 250 °F) 1200 psi - Heat Distortion Temperature (at 264 psi) 196 °F - Storage Temperature 85 °F - - Recommended Mixing and Handling Parameters
Value Units Test Method / Conditions Adhesive LCA-24 - - Activator BA-9 - - Activator required per hundred of adhesive (parts by weight) 5 - - Work Life (at 77°F, room) 60 minutes - Recommended Cure Time (supplied in 2.5 cc metal tubes, Eleven drops = approx. 0.3 g) 2 minutes - Recommended Cure Temperature (supplied in 2.5 cc metal tubes, Eleven drops = approx. 0.3 g) 200 °F -
Packaging & Availability
- Regional Availability
- Packaging Information
Adhesive LCA-24 is available in 1 oz and 8 oz kits, as well as pre-mixed and frozen in Freeze-Paks
Storage & Handling
- Shelf Life
- min. 2 years
- Storage and Shelf Life Information
The minimum shelflife of Adhesive LCA-24 and Activator BA-9 is at least two years when stored in unopened containers at an average temperature below 85°F.