Kömmerling Köratex 216
1 of 62 products in this brandRTU Product Type: Primer
Application Area: Shoes
Compatible Substrates & Surfaces: Cork
Features: Excellent Wetting Behaviour, Pourable
Application Method: Brush, Curtain Coating, Roll Coater
Chemical Family: Natural Latex
Enhanced TDS
Identification
- Chemical Family
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
Applications & Uses
- Application Guidelines
-
- Köratex 216 and materials to be bonded must not be processed at temperatures below the given processing temperature. Low temperature adhesive should be warmed and stirred well before use.
- Frost protection - Protect adhesive strictly from frost, product will be damaged. Slightly undercooled adhesive should be warmed up and stirred well before use.
- Bonding Information
-
Köratex 216 can be applied by brush, roller or spray gun. An application by casting is also possible.Let the adhesive film dry until it is transparent (at least 30 minutes). Drying time can be accelerated by use of additional heat-treatment).
- Cleaning Information
-
Water for fresh adhesive, when film is dried use Körasolv® PU or Isa™Verdünner 220.
Cleaner for Tools - Körasolv® PU and Isa™Verdünner 220
- Preparation Information
-
Surface Requirements - Dry, Clean, Free of grease and Free of dust
- Processing Information
-
Suitable Substrates - Pretreated cork footbeds
Application Equipment - Suitable spray guns
- Product Application
-
Coating und bonding of cork footbeds
Features
- Ready-to-Use Product Features
Features & Benefits
- Product Benefits
-
- Good wetting
- Pourable
Packaging & Availability
- Regional Availability
Physical Properties
- Physical Form
Storage & Handling
- Storage Information
-
Köratex 216 should be used within the shelf life specified on the packaging. The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).