Enhanced TDS
Identification & Functionality
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Characteristics
- good adhesion to paper
- good all-around high and low temperature performance
- water soluble
- Characteristics
- good adhesion to paper
- good all-around high and low temperature performance
- water soluble
Applications & Uses
- Application Area
- Compatible Substrates & Surfaces
- Application Instruction
Application temperature: 400°F
Any reservoir type of hot melt application equipment capable of maintaining the suggested adhesive temperature noted above at the required melt rates is appropriate. A nitrogen blanket is suggested to prolong adhesive pot life if maximum pot life is desired.
1. Purge the previous hot melt adhesive from the equipment.
2. Set the equipment temperature and line speed to the above
suggested settings.
3. Adjust the pump pressure for the desired adhesive bead diameter.
4. The open and set time characteristics may be modified with small
adjustments to the bead diameter and equipment temperature
settings.- Product Applications
Multiwall bag.
- Suitable Substrates
Multiwall bag substrates.
- Applications and Usage Information
- Multiwall bag.
Application Instructions: Application temperature: 400°F
Any reservoir type of hot melt application equipment capable of maintaining the suggested adhesive temperature noted above at the required melt rates is appropriate. A nitrogen blanket is suggested to prolong adhesive pot life if maximum pot life is desired.
- Purge the previous hot melt adhesive from the equipment.
- Set the equipment temperature and line speed to the above suggested settings.
- Adjust the pump pressure for the desired adhesive bead diameter.
- The open and set time characteristics may be modified with small adjustments to the bead diameter and equipment temperature settings.
Cleaning Instructions: Scrape the unit manually with spatulas and then flush with fresh hot melt adhesive.
Properties
- Soluble In
- Typical Properties
Value Units Test Method / Conditions Color 1 - 3 - Gardner Softening Point 280 - 300 °F Mettler Viscosity (at 400°F) 8000 - 12000 cPs - - Suitable Substrates
Multiwall bag substrates.
Safety & Health
- Safety Information
To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize the risk of flammable vapors, do not exceed a melt temperature above 400°F. Prevent the build-up of vapors. Extinguish all sources of ignition during hot melt use.
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 365 days
- Storage Conditions
This product should be stored in poly-lined containers. Prolonged exposure to humidity may cause blocking and handling difficulties.
- Storage and Shelf Life Conditions
- This product should be stored in poly-lined containers. Prolonged exposure to humidity may cause blocking and handling difficulties.
- Shelf Life: 365 days