Enhanced TDS
Identification & Functionality
- Chemical Family
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Key Features
- Bond Strengths up to 500 g
- Sound Dampening, offering excellent performance on noisy substrates
- Low energy to apply adhesive – no ovens required
- Food safe in 24 hours, pouch in 4 days
- Bio-film / Biofilm adhesion
- Industrial
- Compostable
- Sound dampening
- No ecotoxicity
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Segment
- Product Applications
- Conventional solvent-free application equipment
- Dry foods, coffee, snacks, confectionary, and bakery amongst others
- Clean Up Method
- To clean spilled material, allow the material to cool to room temperature and scrape off heavy deposits with a putty knife. Any uncured residue may be wiped clean with common polyurethane solvent (Methyl acetate, MEK). It is recommended that the adhesive be cleaned before it cures.
Properties
- Component A
Value Units Test Method / Conditions Density 9.26 lbs/gal - Density 9.68 lbs/gal - Viscosity (at 25°C) 1100 cPs - Solids Content 100 % - Specific Gravity 1.16 - - Specific Gravity 1.11 - - Viscosity (at 35°C) 600 cPs - - Typical Properties
Value Units Test Method / Conditions Mix Ratio (by volume) 19:40 - - Mix Ratio (by weight) 20:40 - - Surface Energy (nylon) min. 50 dyn - Surface Energy (Polyethylene Terephthalate) min. 38 dyn - Surface Energy (Polyethylene Terephthalate - chemical treatment) min. 40 dyn - Surface Energy (Polyethylene Terephthalate - chemical treatment) min. 50 dyn - - Component B
Value Units Test Method / Conditions Solids Content 100 % - Viscosity (at 25°C) 3200 cPs - Viscosity (at 35°C) 1600 cPs - - Cured Properties
Value Units Test Method / Conditions Curing Temperature max. 25 °C - - Characteristics
Value Units Test Method / Conditions Density 9.35 lbs/gal - Solids Content 100 % - Nip Temperature 120 - 160 °F - Time to Slit 72 hours - Pot Life (at 38°C) 30 minutes - Time to Pouch 96 hours - Coat Weight 1.8 - 2.48 gsm - Metering Roller Temperature 35 - 40 °C - Metering Roller Temperature 95 - 105 °F - Specific Gravity 1.12 - - Viscosity (at 35°C) 1550 cPs -
Packaging & Availability
- Regional Availability
Storage & Handling
- Stability Information
- Partially used pails or drums should be purged with a dry, inert gas and re-sealed between uses. High-humidity conditions may affect the pot life of this adhesive.
- WARNING: Moisture in the air or from wet surroundings will cure this adhesive. Cured adhesive cannot be melted and may cause equipment damage.