H.B. Fuller logo

Advantra® LT 9110

1 of 67 products in this brand
Advantra® LT 9110 is a hot melt adhesive highly recommended for case and carton sealing, wrapping around, and folding boxes. Because of its low viscosity, it can be used at very low application temperatures, which is useful in the case of temperature-sensitive substrates or to reduce energy costs for improved sustainability.

RTU Product Type: Hot Melt Adhesive, Low Melt Adhesive, Reactive Adhesive

Application Area: Cartons, Case Sealing, Folding Box

Compatible Substrates & Surfaces: Cardboards, Paper

Application Method: Nozzle

Features: Excellent Machinability, Free Flowing, Good Heat Stability, High Efficiency, Low Application Temperature, Low Viscosity, Odorless, Superior Bonding Performance, Very Short Start-Up Time

Technical Data Sheet
View All Documents

Enhanced TDS

Identification & Functionality

RTU Product Type
Hot Melt Adhesive,
Low Melt Adhesive,
Reactive Adhesive
Technologies
Adhesives & Sealants
Product Families
Adhesives & Sealants — Bonding Technology
Hot Melt Reactive Adhesives

Features & Benefits

Labeling Claims
Sustainable
Ready-to-Use Product Features
Excellent Machinability,
Free Flowing,
Good Heat Stability,
High Efficiency,
Low Application Temperature,
Low Viscosity,
Odorless,
Superior Bonding Performance,
Very Short Start-Up Time

Applications & Uses

Markets
Printing & Packaging
Applications
Printing & Packaging — Tapes, Labels & Adhesives
Case & Carton Sealing,
Sustainable Packaging Solutions
Application Area
Cartons,
Case Sealing,
Folding Box
Application Method
Nozzle
Compatible Substrates & Surfaces
Cardboards,
Paper
Segment
Case and Carton Sealing
Typical Applications

Highly recommended for case & carton sealing, wrap around and folding box. The low viscosity enables the using at very lower application temperature, useful in case of temperature sensitive substrates or to reduce energy costs for improved sustainability.

Suitable Substrates

Paper, case & cartons and folding boxes.

Application Instructions
  • Apply by nozzle.
  • Application temperature: 100°C - 135°C
  • Open time: medium
  • Set time: short
  • This hot melt with new raw material base has a lower density than conventional hot melts based on EVA, which means a good bonding is reached with minimum application quantity.
  • Due to the differing chemical nature, the adhesive is not mixable with standard EVA hot melts and a product change require a thoroughly equipment cleaning.The prills product format is suitable for use in automatic feeder systems.
  • Push bags to loosen up granules to remove blocking due to storage before filling the reservoir and ensure surrounding does not exceed +35°C.

Properties

Color (Properties)
Off White
Typical Properties
ValueUnitsTest Method / Conditions
FilmHard, elastic, dry--
Application Temperature100 - 135°C-
Softening Pointapprox. 80°CASTM E28-99, Ring and Ball Test
Density (at 23°C)approx. 0.95g/cm³-
Viscosity (at 100°C, spindle 27, Test method version year 1988)approx. 1650mPa.sASTM D3236
Viscosity (at 100°C, spindle 27)approx. 1650mPa.sBrookfield Viscometer
Viscosity (at 135°C, spindle 27, Test method version year 1988)approx. 480mPa.sASTM D3236
Viscosity (at 135°C, spindle 27)approx. 480mPa.sBrookfield Viscometer
Viscosity (at 120°C, spindle 27, Test method version year 1988)approx. 850mPa.sASTM D3236
Viscosity (at 120°C, spindle 27)approx. 850mPa.sBrookfield Viscometer
Storage Temperaturemax. 35°C-

Packaging & Availability

Regional Availability
  • Europe
  • India/MiddleEast/Africa (IMEA)

Storage & Handling

Shelf Life
24 months
Storage Conditions
  • In original sealed packaging protected from sun, dust, moisture and elevated temperatures.
  • Do not store above +35°C to received free-flowing advantage or loosen up in case of any agglomeration caused by differing transport conditions.