WS-8010 Class B
1 of 264 products in this brandWS-8010 Class B is an access door sealant designed to have very low adhesion characteristics and an excellent cure profile. The product can be exposed to a temperature range of -65°F (- 54°C) to 250°F (121°C) without adverse effect. WS-8010 Class B uses manganese dioxide as a curing agent formulated to have an outstanding cure profile. The uncured material is a thixotropic low sag paste designed to be applied by extrusion gun or spatula. The product cures at room temperature to form a gasket with very low adhesion characteristics.
RTU Product Type: 2K (2 component) Sealant
Application Area: Access Door, Aerospace Applications
Application Method: Extrusion, Spatula
Chemical Family: Polysulfides
Features: Alcohol Resistant, Excellent Cure Response, Fungus Resistant, Low Sagging, Oil Resistant, Room Temperature Curing, Thixotropic, Water Resistant
-
Type Document Name
-
Technical Data SheetWS-8010 Class B Technical Data Sheet
Enhanced TDS
Identification
- Chemical Family
- GBU
- RTU Product Type
- Categories
Application Information
- Cure Method
Applications
- Application Area
- Application Method
- Segment
Applications & Uses
- Mixing Instructions
-
Mix the two part kits and two part sealant cartridges as indicated on the container label. Do not forget to mix Part A and Part B of the two part kits to uniformity before blending them. Avoid leaving unmixed material around the side and bottom of the mixing container.
Features
- Ready-to-Use Product Features
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
-
WS-8010 Class B is supplied in two part kit containers and cartridges for the purpose of facilitating mixing and application.
Physical Properties
- Physical Form
Properties
- Typical Properties
-
Value Units Test Method / Conditions Application Life (B-1/2) 0.5 hours - Application Life (B-2) 2 hours - Application Temperature -65 to 250 °F - Cure Time (B-1/2) max. 4 hours - Cure Time (B-2) max. 12 hours - Peel Strength (at 140°F 7 day 3% salt water immersion, AMS2629 JRF) 100 % - Storage Temperature max. 27 °C - Swell (resistance to AMS2629 JRF hydrocarbons at 7days 140°F (60°C) exposure) 6.5 % - Tack Free Time (B-1/2) max. 3 hours - Tack Free Time (B-2) max. 6 hours - Viscosity (spindle 7 at 2 rpm) 8000 - 10000 m.Pas Brookfield Weight Loss (resistance to AMS2629 JRF hydrocarbons at 7days 140°F (60°C) exposure) max. 6 % - - Performance Properties
-
Value Units Test Method / Conditions Final Hardness (at 77°F, in 14 days, at 50% RH) 55 Shore A AMS-3284 Non-Volatile Content (at 77°F, 14 days, 50% RH) 98 % AMS 3284 Specific Gravity (at 77°F, 14 days, 50% RH) 1.45 - AMS-3284 - Application Properties
-
Value Units Test Method / Conditions Slump (B-1/2, B-2) max. 0.2 mm -
Regulatory & Compliance
- OEM Specifications
Storage & Handling
- Storage Information
-
Product may change appearance if exposed to cold temperatures during shipment or storage. If this happens, please gently warm to 45-50°C and mix until normal appearance is restored.
- Storage Information
-
The shelf life of WS-8010 Class B is 9 months from the date of shipment when stored below 80°F (27°C) in the original unopened container
- Shelf Life
-
9 months