Swift®lock 2009
1 of 67 products in this brandSwift®lock 2009 is a moisture-curing reactive hot melt adhesive based on PO. It is designed to form a very strong bond that is resistant to heat, cold, and moisture after final curing. This product is characterized by its stability of viscosity during application, ensuring consistent and reliable performance. Additionally, Swift®lock 2009 offers high green strength.
RTU Product Type: Hot Melt Adhesive, Reactive Adhesive
Application Area: Automotive Interior Trim
Compatible Substrates & Surfaces: Polypropylene (PP)
Chemical Family: Polyolefins
Features: Excellent Moisture Resistance, Fast Curing, Good Adhesion, Good Cold Resistance, Good Green Strength, Heat Resistance, Viscosity Stability
-
Type Document Name
-
Technical Data SheetSwift®lock 2009 Technical Data Sheet
Enhanced TDS
Identification
- Chemical Family
- GBU
- RTU Product Type
- Categories
Application Information
- Cure Method
Applications
- Application Area
- Compatible Substrates & Surfaces
Applications & Uses
- Application Instructions
-
- Application temperature: approx. 150°C.
- Setting Time and Open Time can be affected by application temperature. Higher application temperature results in a longer Setting Time.
- Substrate surface has to be clean, dry and free from oil and grease. Substrate temperature must not be below 20°C during application. Lower temperatures deteriorate spreading of glue and shorten Open Time.
- After physical curing of adhesive, parts are ready for further processing in short time. Adhesive can be applied by nozzle, roller coater and spraying equipment. The adhesive in application equipment must be isolated from ambient moisture. Typically this is achieved with a dry nitrogen blanket.
Features
- Ready-to-Use Product Features
Features & Benefits
- Labeling Claims
Packaging & Availability
- Country Availability
- Regional Availability
Physical Properties
- Odor
-
Characteristic
Properties
- Application Temperature:
-
150 °C
- Typical Properties
-
Value Units Test Method / Conditions Application Temperature approx. 150 °C - Cure Time (dependent upon ambient moisture and temperature) approx. 5 - 7 days - Open Time approx. 40 seconds - Viscosity (at 150°C, spindle 29, 10rpm) approx. 6000 mPa.s Brookfield Viscometer - Odor
-
characteristic
Storage & Handling
- Storage Condition
-
In original sealed packaging protected from sun, dust, moisture and high temperatures. Store under clean and dry conditions at constant room temperature.