Sesame® Film Tape 125 micron

Identification

GBU

HHC

RTU Product Type

Tape

Categories

Markets → Printing & Packaging → Applications → Tapes, Labels & Adhesives → Tapes & Labels

Technologies → Adhesives & Sealants → Product Families → Pressure Sensitive Adhesives, Tapes & Labels → Tapes

Applications

Application Area

Cartons,

Envelope,

Folding Carton

Compatible Substrates & Surfaces

Corrugated Board

Segment

ACS

Applications & Uses

Application Instructions

Mounting and Application

• Pick up the roll from the core and load it onto the dispensing system. To prevent damage, do not press into the tape or put pressure or side impact into the roll edge.
• Proper roll tension throughout the application is critical to achieve quality board/liner without delamination or warp. 
• Optimal application temperature is 72°F (22°C) onto board that is 158°F (70°C) or below. Do not apply below 32°F (0°C). Stack temperatures also affect bond quality. The optimal stack temperature is below 122°F (50°C).
• Cleaning requirement may vary depends on the dispensing speed, frequency, and environment. Pressure rollers and pulleys may require cleaning after long run periods. The pressure sensitive adhesive, by nature, flows to the edge of the tape which can cause a buildup on contact points.

Application Instructions

Means to minimize adhesive build up

• Keep adhesive side away from the rollers and moving parts. Flip tapes to have adhesive away from rollers and pulleys.
• Make sure all rollers and pulleys run freely and are well aligned.
• Use only clean rollers free from dust or soil.

Typical Applications

For use as a simple packaging opening system for corrugated and folding carton boxes and envelopes. Suitable for opening use from 14°F (-10°C) to 158°F (70°C). Applied onto the corrugated board at the dry end of the corrugated process with an H.B. Fuller dispensing system. Alternately, the product can be applied using other dry end dispensing systems or intermittently on the folder/gluer lines.

Features

Ready-to-Use Product Features

Ease Of Use

Packaging & Availability

Regional Availability

• North America

Packaging and Handling

Tube Size	15.2 cm x 17.8 cm / 6.0 inch x 7.0 inch
Average Weight per Roll	9.98 kg / 22 lbs.

Packaging and Handling Information

Carefully unpack: The tape needs to be unpacked with care to prevent the damage. Keep the tape in the protective wrapping when removing it from the box. Remove overwrap on a flat surface. Note the blue sticker which indicates the tape lead end.

Properties

Typical Properties

	Value	Units	Test Method / Conditions
Application Temperature	-10 to 70	°C	-
Elongation at Break	min. 20	%	PSTC 131
Film Thickness	125	μm	-
Peel Strength (steel)	37.458	oz/in	PSTC 101
Storage Temperature (50% RH)	22	°C	-
Tear Strength	241.3	lbf/in	PSTC 131
Thickness (total tape)	157	μm	-
Weight (average weight per roll)	9.98	kg	-

Storage & Handling

Storage Conditions

Protect Sesame Film Tape with a polyethylene bag to protect pressure- sensitive adhesive from collecting dirt and dust. Optimal storage is at the standard environment of 72°F (22°C), 50% RH. Do not store the product in extreme temperature, or under direct sunlight.

Shelf Life

3 years