Rakoll® HM 2333
1 of 13 products in this brandRakoll® HM 2333 is a fast-setting thermoplastic hot melt adhesive with excellent heat resistance and good flexibility at low temperatures. It is also a hydrophobic material with good water resistance and can adhere well to low-energy substrates like plastic. Moreover, it doesn't stick to most decorative cabinetry finishes.
RTU Product Type: Hot Melt Adhesive
Application Area: Cabinetry, Furniture, Woodwork
Features: Fast Setting, Good Adhesion, Good Green Strength, Heat Resistance, High Flexibility, Low Application Temperature, Low Energy Consumption, Water Resistant
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
Features
- Ready-to-Use Product Features
Features & Benefits
- Product Benefits
-
- Lower application temperature (325ºF - 335ºF) compared to
- polyamide hot melt (375ºF - 425ºF)
- Higher green strength compared to polyolefin hot melts
- Faster set time compared to polyolefin
- Better heat resistance compared to EVA hot melts
- Better low temperature flexibility compared to typical polyamides
- Meets and exceeds Kitchen Cabinet Manufacturers Association (KCMA)
- cabinetry adhesive test standards
- Tougher than typical polyamides
Packaging & Availability
- Regional Availability
Properties
- Strain at Break:
-
703 %
- Typical Properties
-
Value Units Test Method / Conditions Application Temperature 325 - 335 °F - Bead to Molten 193 °F - Elongation 703 % - Open Time 12 seconds - Peel Adhesion Failure Temperature 184 °F - Set Time 15 seconds - Shear Adhesion Failure Temperature 255 °F - Softening Point 302 °F Mettler Transition Temperature 260 °F - Ultimate Stress (ultimate) 429 psi -
Storage & Handling
- Storage Condition
-
Store material in original unopened packaging at temperatures between 4°C and 32°C. Shelf life is two years minimum when stored as recommended.
- Shelf Life
-
min. 2 years
Technical Details & Test Data
- Viscosity Curve
-
