H.B. Fuller

Identification

Chemical Family: Ethylene-Propylene-Diene Copolymers (EPDM)
GBU: BAS
RTU Product Type: 1K (1 component) Sealant,

Solvent free (100% Solids) Sealant,

Solventborne Sealant,

Solventborne Adhesive

Categories: Markets → Automotive & Transportation → Applications → Bonding & Assembly → Sealants

Markets → Building & Construction → Applications → Building Envelope & Roofing → Waterproofing & Weatherproofing

Markets → Building & Construction → Applications → Building Materials → Construction Adhesives

Markets → Building & Construction → Applications → Building Materials → Sealants & Caulks

Markets → Printing & Packaging → Applications → Tapes, Labels & Adhesives → Tapes & Labels

Technologies → Adhesives & Sealants → Product Families → Sealing Technology → Solvent-Based Sealants

Applications

Application Area: Roofing Substrates,

Roofs
Compatible Substrates & Surfaces: Metal,

Wood,

Ethylene Propylene Diene Monomer (EPDM),

Concrete
Segment: Single Ply EPDM,

Flashing Sealant/Tape

Applications & Uses

Application Method: 1. Prior to application, ensure that all seams and/or flashings are properly installlled according to the EPDM roof system manufacturer’s guidelines.
2. Cut nozzle on tube for desired bead size. Place patented feathering tip over cut nozzle prior to installing cartridge into caulking gun.
3. Gun 1/4” (6.4mm) size bead of Millennium EPDM Edge Sealant along the exposed edge of membrane seam splice or flashing.
4. No tooling of installed sealant is necessary if feathering tip is used. If feathering tip is not used, tool the sealant. Tool the sealant bead so the high point is above the offset of the splice and the edges are feathered onto the deck.
5. Typically membrane and flashing seams must be allowed to age at least 2 hours before Millennium EPDM Edge Sealant is installed. Refer to EPDM roof system manufacturer guidelines for additional recommendations.
Basic Use: Millennium EPDM Edge Sealant is designed to seal the exposed edges of EPDM membrane roof system splices, T-joints, step downs, tie-ins, termination bars, and general flashing details.
Surface Preparation: All work surfaces should be clean, dry, free of dirt, dust, debris, oils, un-adhered coatings, deteriorated membrane and other contaminants that may result in a surface that is not sound or is uneven. If necessary, clean the surface to receive the Edge Sealant with an approved EPDM membrane cleaner.

Features

Ready-to-Use Product Features: Excellent Moisture Resistance,

Good Sagging Resistance,

High Solids Content,

Low VOC,

UV Resistant,

Very Good Heat Resistance,

Solvent-Based

Features & Benefits

Key Attributes

Features	Benefits
Low VOC formula (<250 g/L)	Suitable for use in VOC regulated markets
Aliphatic solvent system	Will not attack polystirene
Excellent adhesion to a variety of substrates (EPDM, metals, wood, and concrete)	Suitable for a wide variety of applications
Resistant to UV light, high heat, and moisture	Long-term durability
High solids content	Resistant to shrinking and cracking
No sag or flow	Suitable for both vertical and horizontal application

Identification & Functionality

Base Polymer

Base - EPDM Rubber
Test Method - FTIR

Product Image

Packaging & Availability

Packaging Type

Cartridges

Regional Availability

Asia Pacific
Europe
North America
Latin America
India/MiddleEast/Africa (IMEA)

Packaging and Coverage

Millennium EPDM Edge Sealant is available in the following package:

Cartridge Size	Part #	Cartridges/Case
10.3 fl. oz. (300 mL)	CT-6343	12

Coverage rate will be approximately 20 - 22 lineal feet (6.0 - 6.7 m) for a 1/4” (0.64 cm) bead.

Physical Properties

Color (Properties): Black

Properties

Application Temperature:

-6~49 °C

Flash Point:

10 °C

Shelf Life:

24 months

Solid Content:

80 %

Note

The foregoing information is published as general information only. The listed properties and performance characteristics are typical values and are not to be interpreted as manufacturing specifications.

Typical Properties


	Value	Units	Test Method / Conditions
Application Temperature	-6 to 49	°C	ASTM C603
Base Polymer	Ethylene Propylene Diene Monomer Rubber	-	Fourier Transform Infrared Spectroscopy
Coverage (10.3 fl. oz.)	20.4 - 22.4	ft/10.5fl.oz.	-
Curing Time	approx. 72	hours	ASTM D2377
Density	11.6	lb/gal	ASTM D1475
Flash Point	10	°C	ASTM D56
Nominal Service Temperature	-40 to 93	°C	ASTM D3359
Solid Content	80	%	ASTM C681
Storage Temperature	40 - 110	°F	-
Tack-Free Time	max. 1	hours	ASTM D2377
Volatile Organic Compound Content	max. 250	g/L	ASTM D2369

Storage & Handling

Storage Conditions: Store material in original unopened packaging at temperatures between 40°F-110°F. (4°C-38°C). Shelf life is 24 months when stored as recommended.
Shelf Life: 24 months

Millennium EPDM Edge Sealant

Enhanced TDS