H.B. Fuller

Identification

GBU: EA
RTU Product Type: Pressure Sensitive Adhesive,

Hot Melt Sealant,

1K (1 component) Sealant

Categories: Markets → Automotive & Transportation → Applications → Automotive → Electrical & Electronic Systems

Markets → Electrical & Electronics → Applications → Parts & Components → Batteries

Markets → Industrial → Applications → Chemical & Industrial Manufacturing → Equipment & Parts

Technologies → Adhesives & Sealants → Product Families → Pressure Sensitive Adhesives, Tapes & Labels → Pressure Sensitive Adhesives

Technologies → Adhesives & Sealants → Product Families → Sealing Technology → Hot Melt Sealants

Applications

Application Area: Battery Packs,

Gaskets,

Batteries,

Cure In Place Gasket,

Form In Plastic Gaskets (FIPG),

Electric Vehicle (EV)
Compatible Substrates & Surfaces: Metal,

Aluminum,

Steel,

Cast Iron

Applications & Uses

Application Method

Coating surface area should be clean and free of any oils, residues, dust, or any other contaminants
Apply to primary substrate. Primary substrate is the preferred substrate in which the material will remain permanently adhered. Secondary substrate will be married to the primary and material will release from during servicing.
Apply using appropriate Hot Melt dispensing equipment. Adjust heating and pressure parameters to achieve appropriate flow rate.
Allow 5 minutes for material to cool to room temperature prior to assembly of enclosure.

End Uses

Adhesive & Sealant End Applications: Pressure Sensitive Adhesive

Features

Ready-to-Use Product Features: Fast Setting,

Moisture Resistant,

Shock Absorbent,

Wide Temperature Operating Range,

Vibration Resistance,

CTE Absorption,

Dust Resistance,

Ease Of Use

Features & Benefits

Key Attributes

One component requires no mixing
Thermoplastic nature allows for ease of use
Re-sealable capabilities improve serviceability of enclosure
Suitable for easy processing with proper hot melt dispense systems
End of life recyclability

Identification & Functionality

Product Information

Technology/Base	Block Co-Polymer
Type of Product	Re-sealable Gasket
Components	One Component
Curing	Non-Reactive
Consistency	Hot Melt

Packaging & Availability

Packaging Type

Drums,

Pails

Regional Availability

Asia Pacific
Europe
North America
Latin America
India/MiddleEast/Africa (IMEA)

Typical Packaging

Sample Cartridges: 310mL
Sample Rolls: Various Dimension
Pails: 5 gal
Drums: 55 gal

Physical Properties

Color (Properties): Grey

Properties

Density:

940 kg/m³

Shelf Life:

12 months

Specific Gravity:

0.94

Strain at Break:

500 %

Tensile Strength:

0.1104 MPa

Viscosity:

32000 cps

Performance Properties


	Value	Units	Test Method / Conditions
Service Temperature	-40 to 110	°C	-

Rheological Properties


	Value	Units	Test Method / Conditions
Specific Gravity	0.94	-	Water Displacement
Viscosity (at 200°C, spindle 29, 20rpm)	32000	cPs	Brookfield

Adhesive Properties


	Value	Units	Test Method / Conditions
90° Average Peak Load (24h after at 12°/min, 90° peel)	1	pli	-
Tensile Strength (cross pluck at 0.2°/min)	16	psi	-

Mechanical Properties


	Value	Units	Test Method / Conditions
Compression Set (1 week, 50% compression, recovery)	90	% recovery	-
Compression Set (at 80°C, 1 week, 50% compression, recovery)	50	% recovery	-
Cone Penentration (150g added load)	120	ddm	ASTM D217
Force to Compress (50% compression)	45	lbf	ASTM C972
Rebound-Post Force to Compress (24h post force to compress)	99	%	-
Rebound-Post Force to Compress (5min post force to compress)	99	%	-
Tensile Strength (die c)	23.1	psi	ASTM D412 Die C

Typical Properties


	Value	Units	Test Method / Conditions
Storage Temperature	8 - 28	°C	-

Storage & Handling

Storage & Handling Information

Product should be stored at temperature between 8ºC to 28ºC in the unopened container in a dry location.
Shelf Life: 12 months from date of manufacture.
Material can typically be peeled or manually removed by hand easily, however, if necessary, mineral spirits can be used to remove excess residue.

Shelf Life