H.B. Fuller

Features and Benefits Information

This product has the following features and benefits;

High green strength allows immediate handling processing and testing
Open time of 15 minutes allowing for extended assembly time.
Excellent adhesion to a diverse selection of substrates including engineering plastics such as polycarbonate, and metals including stainless steel and aluminum.
Dispense like a one-part hot melt adhesive, reacts with atmospheric moisture to form a tough, cross-linked urethane polymer network.

Regional Availability

Characteristics

Uncured Properties

Cured Properties


	Value	Units	Test Method / Conditions
Elongation at Break	575	%	-
Tensile Lap Shear Adhesion (aluminum-aluminum after 168 hours of cure)	4.5	MPa	-
Tensile Strength at Break	10.8	MPa	-

Application Properties


	Value	Units	Test Method / Conditions
Application Temperature (at hot melt dispenser)	140 - 170	°C	-
Open Time (dependent on adhesivebead size, substrate typeand environmental conditions)	min. 15	minutes	-

Typical Properties


	Value	Units	Test Method / Conditions
Storage Temperature	15 - 40	°C	-

Appearance

Yellow-light brown

Shelf Life Information: Shelf life of this product is 6 months in original unopened (sealed) foil bag when stored at this temperature range
Storage Information: EV Bond 775 should be stored in its original sealed foil bag in a dry location that maintains temperatures between 15 ̊C to 40°C.
Shelf Life: 180 days (at 15 - 40°C), 6 - 12 months, 6 months

Application Information

This product has the following Application Instructions;

EV Bond 775 can be dispensed using automatic heating, dispensing or dipping systems at temperatures of 140-170°C.
Green strength will be achieved as soon as the adhesive bond has cooled.

H.B. Fuller EV Bond 775