FA4844
1 of 264 products in this brandFA4844 is a single part Tie Cement specifically designed for use in the installation of protective low plasticized PVC sheet in holding tanks, chrome-plating baths, hydroelectric and other power generating facilities. Use in conjunction with our PC 4426 Primer for bonding low plasticized PVC liner to sandblasted metals, concrete, fiberglass and wooden tanks which are subject to standard operational temperatures ranging from - 20 deg. F. to 160 deg. F. Available in Neutral or Black, FA 4844 is characterized by an aggressive building tack throughout its 30-minute bonding range. It rapidly develops a high strength, resilient bond between the liner and pre-primed tank substrate. The combination primer / tie cement system typically yields a bond strength of 20 lbs. per linear inch between the liners and referenced tank substrates after 14 days and demonstrates excellent resistance to grease, oils, and water.
RTU Product Type: 1K (1 component) Adhesive
Application Area: Liners, PVC Sheets, Tanks
Compatible Substrates & Surfaces: Concrete, Fiberglass, Metal, Polyvinyl Chloride (PVC), Wood
Chemical Family: Polychloroprenes
Features: Grease Resistant, High Strength, Oil Resistant, Room Temperature Curing, Water Resistant
-
Type Document Name
-
Technical Data SheetFA4844 Technical Data Sheet
Enhanced TDS
Identification
- Chemical Family
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Compatible Substrates & Surfaces
Applications & Uses
- Tie Cement Applications
-
- For maximized performance, all application surfaces must be pre-primed with HB Fuller’s PC4426MODBK Primer (See product data sheet).
- Pre-stir the FA 4844 thoroughly prior to brush or roller application of two coats to all pre-primed surfaces.
- Allow 30-40 minutes drying time between coats, and up to 30 minutes before assembly under firm hand roller pressure.
Features
- Ready-to-Use Product Features
Packaging & Availability
- Regional Availability
Physical Properties
- Physical Form
- Appearance
-
Neutral, grey, purple or black liquid
Properties
- Uncured Properties
-
Value Units Test Method / Conditions Density 7.0 - 7.4 lbs/gal - Solid Content 21 - 24 % - Viscosity (spindle 3, 20 rpm) 800 - 1300 cPs Brookfield RVT Viscometer - Typical Properties
-
Value Units Test Method / Conditions Storage Temperature 45 - 75 °F - - Appearance
-
Neutral, grey, purple or black liquid
Storage & Handling
- Storage Conditions
-
Recommended Storage 45°F - 75°F. Keep out of direct sunlight. Mix well before use.
- Shelf Life
-
6 months