H.B. Fuller

Cilbond

Cilbond - Proven Expertise for your Bonding Needs CILBOND offers high-performance, one-coat bonding agents, expertly designed to chemically bond rubber and polyurethane elastomers to a variety of substrates during molding and casting processes. Our innovative products allow engineers to blend the distinctive properties of rubber, urethane, plastic, metal, and fabric, thus developing industrial components with benefits that surpass the individual merits of their parts. Key features of our products include flexibility, strength, abrasion resistance, chemical resistance, and cost-effectiveness, making them vital for industries such as Automotive, Oil & Gas, Mining, and General Industries.

View All Cilbond Products

Cilbond® 24

Application Method: Brush, Dip Coating, Roll Coater, Spray
Compatible Substrates & Surfaces: Butadiene Rubber (BR), Carboxylated Nitrile Butadiene Rubber (XNBR), Cellulose, Chloroprene Rubber (CR), Chlorosulfonated Polyethylene Synthetic Rubber (ACSM), Elastomers & Rubbers, Epichlorohydrin Rubber (ECO), Ethylene Acrylic Rubber (AEM), Ethylene Vinyl Acetate (EVA), Fabrics, Glass, Glass Fibre Reinforced Polymer (GFRP), Isoprene Rubber (IR), Metal, Natural Rubber, Nickel, Nitrile Butadiene Rubber (NBR), Nitrile Rubber, Plastics, Polyacrylate Rubber (ACM), Polyamide, Polyesters, Polynorbornene, Stainless Steel, Styrene Butadiene Rubber (SBR)
Features: Acid Resistant, Alkali Resistant, Boil Water Resistance, Chemical Resistant, Corrosion Resistant, Easy To Apply, Ethylene Glycol Resistance, Excellent Adherence, Excellent Mineral Oil Resistance, Excellent Salt Spray Resistance, Fatigue Resistant, Fuel Resistant, Good Adhesion, Good Fuel Resistance, Good Glycol Resistance, Good Hot Oil Resistant, Grease Resistant, Heat Resistance, High Fatigue Resistance, High Performance, High Temperature Resistance, Hot Water Resistance, Kerosene Resistance, Low Temperature Resistant, Minimal Mould Build Up, Non Staining, Oil Resistant, Petrol Resistance, Pre-bake Resistance, Propylene Glycol Resistance, Solvent-Based, Steam Resistant, Temperature Resistance

Cilbond® 24 is a one-coat rubber-to-metal adhesive designed for general-purpose elastomers. It provides superior performance compared to standard primer and topcoat solutions. This adhesive offers significant process improvements and delivers long-term end-use performance. One of the key advantages of Cilbond® 24 is its exceptional corrosion protection, which helps enhance the durability and longevity of bonded parts.

Cilbond® 36

Application Method: Brush, Dip Coating, Spray
Compatible Substrates & Surfaces: Aluminum, Brass, Ceramic, Elastomers & Rubbers, Ethylene Acrylic Rubber (AEM), Ethylene Propylene Diene Monomer (EPDM), Fluoroelastomer (FKM), Fluoropolymer Surfaces, Fluorosilicone Rubber (FVMQ), Glass, Glass Fibre Reinforced Polymer (GFRP), Hydrogenated Acrylonitrile Butadiene Rubber (HNBR), Metal, Perfluoroelastomer (FFKM), Plastics, Polyacrylate Rubber (ACM), Polyamide, Polyesters, Silicone, Silicone Rubber, Silicone Rubber Vinyl Methyl Silicone (VMQ), Stainless Steel, Steel
Features: Boil Water Resistance, Chemical Resistant, Chipping Resistance, Corrosion Resistant, Easy To Apply, Excellent Adherence, Excellent Fuel Resistance, Fast Drying, Fatigue Resistant, Good Fuel Resistance, Good Glycol Resistance, Good Hot Oil Resistant, Good Toughness, Heat Resistance, High Fatigue Resistance, High Temperature Resistance, Improves Environmental Resistance, Low Temperature Resistant, Minimal Mould Build Up, Non-Blocking, Non Staining, Non-Wiping, Petrol Resistance, Pre-bake Resistance, Solvent-Based, Tack-free

Cilbond® 36 is a one-coat rubber-to-metal bonding solution specifically designed for specialty elastomers, making it ideal for demanding and high-performance applications. It offers extreme corrosion protection and a long open time. Cilbond® 36 serves as a high-performance bonding agent for VMQ (silicone) to substrate, exhibits exceptional temperature performance, and features a one-coat formulation.

Cilbond® 49SF

Chemical Family: Polyesters, Polyurethanes (PU)
Application Method: Brush, Dip Coating, Roll Coater, Spray
Compatible Substrates & Surfaces: Epoxies, Fiberglass, Fibre-reinforced Plastic (FRP), Glass Fibre Reinforced Polymer (GFRP), Metal, Plastics, Polyamide, Polybutylene Terephthalate (PBT), Polyesters, Polyether Ether Ketone (PEEK), Polyethersulfone (PES), Polyethylene Terephthalate (PET), Polyphenylene Sulfide (PPS), Poly(p-Phenylene Oxide) (PPO), Polyurethane, Thermoplastic Polyurethane Elastomer (TPU)
Features: Boil Water Resistance, Excellent Fuel Resistance, Excellent Performance, Good Cold Resistance, Good Glycol Resistance, Good Lubricant Resistance, Heat Resistance, High Fatigue Resistance, High Hydrolytic Stability, Hot Water Resistance, Impact Resistance, Ink Resistance, Oil Resistant, Pre-bake Resistance, Solvent-Based, Water Resistant

Cilbond® 49SF is a single-component bonding agent specifically designed for hot-cure applications (more than 160°F/70°C) with castable polyurethane elastomers and injection-molded TPU systems. It features a pigmented red color and is widely recognized as the industry benchmark for high-performance urethane bonding. Cilbond® 49SF has been developed to bond effectively with various materials, including metals, polyesters, polyamides, epoxies, and fiberglass reinforced plastics. It is highly recommended by leading urethane manufacturers and offers impressive in-service heat resistance of up to 265°F/130˚C (or up to 350°F/180˚C when used in combination with the Cilcure® B additive).

Cilbond® 48

Chemical Family: Polyurethanes (PU)
Application Method: Brush, Dip Coating, Roll Coater, Spray
Compatible Substrates & Surfaces: Epoxies, Fabrics, Fibre-reinforced Plastic (FRP), Glass Fibre Reinforced Polymer (GFRP), Metal, Plastics, Polyamide, Polybutylene Terephthalate (PBT), Polyesters, Polyether Ether Ketone (PEEK), Polyethersulfone (PES), Polyethylene Terephthalate (PET), Polyphenylene Sulfide (PPS), Poly(p-Phenylene Oxide) (PPO), Polyurethane, Thermoplastic Polyurethane Elastomer (TPU)
Features: Excellent Salt Spray Resistance, Fast Drying, Fuel Resistant, Good Cold Resistance, Heat Resistance, High Fatigue Resistance, High Hydrolytic Stability, Non-Blocking, Oil Resistant, Pre-bake Resistance, Solvent-Based, Tack-free, Water Resistant

Cilbond® 48 is a clear, single-component bonding agent designed for both cold and hot-cure applications (65-275°F/20-135°C) with castable polyurethane systems and injection-molded thermoplastic polyurethane (TPU) systems on metal and plastic substrates. It provides exceptional corrosion resistance and offers the advantage of fast drying. Cilbond® 48 can be used without the need for a pre-bake process and has been specifically developed for use in dynamic conditions where hydrolytic stability is crucial.

Cilbond® 62W

Application Method: Brush, Dip Coating, Spray
Compatible Substrates & Surfaces: Carboxylated Nitrile Butadiene Rubber (XNBR), Chloroprene Rubber (CR), Elastomers & Rubbers, Epichlorohydrin Rubber (ECO), Epoxies, Fibre-reinforced Plastic (FRP), Glass Fibre Reinforced Polymer (GFRP), Glass-reinforced Plastic (GRP), Hydrogenated Acrylonitrile Butadiene Rubber (HNBR), Metal, Nitrile Butadiene Rubber (NBR), Polyacrylate Rubber (ACM), Polybutylene Terephthalate (PBT), Polyether Ether Ketone (PEEK), Polyethersulfone (PES), Polyethylene Terephthalate (PET), Polyphenylene Sulfide (PPS), Poly(p-Phenylene Oxide) (PPO)
Features: Chemical Resistant, Corrosion Resistant, Excellent Bond Performance, Excellent Fuel Resistance, Excellent Performance, Excellent Salt Spray Resistance, Fatigue Resistant, Good Bonding Strength, Heat Resistance, High Fatigue Resistance, High Temperature Resistance, Low VOC, Oil Resistant, Water-based, Water Resistant

Cilbond® 62W is a trusted and high-performance water-based one-coat friction system designed for compounds used in the Friction Industry. It is primarily used in the manufacturing of products like original equipment (OE) and after-market brake pads. It bonds to all metals commonly used in brake pad production, including Zn/Ni coatings.

Cilbond® 10E

Application Method: Brush, Dip Coating, Roll Coater, Spray
Compatible Substrates & Surfaces: Carboxylated Nitrile Butadiene Rubber (XNBR), Elastomers & Rubbers, Epichlorohydrin Rubber (ECO), Epoxies, Fabrics, Glass Fibre Reinforced Polymer (GFRP), Hydrogenated Acrylonitrile Butadiene Rubber (HNBR), Metal, Nitrile Butadiene Rubber (NBR), Polyacrylate Rubber (ACM), Polyamide, Polybutylene Terephthalate (PBT), Polyethersulfone (PES), Polyoxymethylene (POM), Polyphenylene Sulfide (PPS), Poly(p-Phenylene Oxide) (PPO), Rubber, Thermosetting Plastics
Features: Boil Water Resistance, Chemical Resistant, Excellent Adherence, Excellent Bond Performance, Excellent Salt Spray Resistance, Fatigue Resistant, Good Hot Oil Resistant, Hydraulic Fluid Resistance , Minimal Mould Build Up, Pre-bake Resistance, Solvent-Based, Very Good Heat Resistance

Cilbond® 10E is a solvent-based adhesive that functions as a general-purpose primer for rubber-to-metal bonding. It also serves as a one-coat bonding system designed for NBR-to-metal bonding applications. The adhesive enhances the adhesion between rubber and metal substrates, improving the overall bond strength and durability. Cilbond® 10E finds application in various industries where NBR rubber is bonded to metal, such as in the production of seals and rollers.

Cilbond® 80ET

Application Method: Brush, Dip Coating, Spray
Compatible Substrates & Surfaces: Butadiene Rubber (BR), Butyl Rubber, Carboxylated Nitrile Butadiene Rubber (XNBR), Chlorinated Polyethylene (CPE), Chloroprene Rubber (CR), Chlorosulfonated Polyethylene Synthetic Rubber (ACSM), Elastomers & Rubbers, Epichlorohydrin Rubber (ECO), Ethylene Acrylic Rubber (AEM), Ethylene Propylene Diene Monomer (EPDM), Ethylene Propylene Rubber (EPM), Ethylene Vinyl Acetate (EVA), Fabrics, Glass Fibre Reinforced Polymer (GFRP), Hydrogenated Acrylonitrile Butadiene Rubber (HNBR), Isobutylene Isoprene Rubber (IIR), Isoprene Rubber (IR), Metal, Natural Rubber, Nitrile Butadiene Rubber (NBR), Plastics, Polyacrylate Rubber (ACM), Polyamide, Polyurethane, Styrene Butadiene Rubber (SBR)
Features: Boil Water Resistance, Chemical Resistant, Easy To Apply, Excellent Adherence, Excellent Fuel Resistance, Excellent Salt Spray Resistance, Fatigue Resistant, Good Adhesion, Good Bonding Strength, Good Fuel Resistance, Good Glycol Resistance, Good Hot Oil Resistant, Grease Resistant, Heat Resistance, High Performance, Improved Adhesion, Low Temperature Resistant, Minimal Mould Build Up, Oil Resistant, Petrol Resistance, Pre-bake Resistance, Solvent-Based

Cilbond® 80ET is a solvent-based rubber bonding agent topcoat known for its exceptional rubber-to-metal bonding properties. It bonds various general-purpose elastomers and offers versatility in bonding EPDM, HNBR, NBR, NR, ECO, and other elastomers. It is commonly used in rubber-to-metal bonding applications, including high-performance timing belts.

Cilbond® 89ET

Application Method: Brush, Dip Coating, Spray
Compatible Substrates & Surfaces: Butadiene Rubber (BR), Carboxylated Nitrile Butadiene Rubber (XNBR), Chlorinated Polyethylene (CPE), Chloroprene Rubber (CR), Chlorosulfonated Polyethylene Synthetic Rubber (ACSM), Elastomers & Rubbers, Epichlorohydrin Rubber (ECO), Ethylene Acrylic Rubber (AEM), Ethylene Propylene Diene Monomer (EPDM), Ethylene Propylene Rubber (EPM), Ethylene Vinyl Acetate (EVA), Glass Fibre Reinforced Polymer (GFRP), Hydrogenated Acrylonitrile Butadiene Rubber (HNBR), Isobutylene Isoprene Rubber (IIR), Isoprene Rubber (IR), Metal, Natural Rubber, Nitrile Butadiene Rubber (NBR), Plastics, Polyacrylate Rubber (ACM), Polyamide, Polyesters, Polyurethane, Styrene Butadiene Rubber (SBR), Thermosetting Plastics
Features: Boil Water Resistance, Chemical Resistant, Easy To Apply, Excellent Adherence, Excellent Salt Spray Resistance, Fatigue Resistant, Fuel Resistant, Good Glycol Resistance, Good Hot Oil Resistant, Grease Resistant, Heat Resistance, Highly Versatile, High Performance, Low Temperature Resistant, Minimal Mould Build Up, Oil Resistant, Pre-bake Resistance, Solvent-Based, Water Resistant

Cilbond® 89ET is a versatile solvent-based adhesive designed for rubber-to-metal bonding. It serves as a one-coat solution suitable for various elastomer types, including EPDM to metal bonding. This adhesive offers a low activation temperature, making it ideal for tank lining applications. Its uses span across the manufacturing of TVDs, rubber rollers, tank lining, and other rubber-to-substrate applications. Cilbond® 89ET is a reliable choice for rubber-to-metal bonding agents.

Cilbond® 12E

Application Method: Brush, Dip Coating, Roll Coater, Spray
Compatible Substrates & Surfaces: Aluminum, Brass, Carboxylated Nitrile Butadiene Rubber (XNBR), Cast Iron, Chlorinated Polyethylene (CPE), Chloroprene Rubber (CR), Chlorosulfonated Polyethylene Synthetic Rubber (ACSM), Elastomers & Rubbers, Epichlorohydrin Rubber (ECO), Ethylene Acrylic Rubber (AEM), Ethylene Propylene Diene Monomer (EPDM), Ethylene Vinyl Acetate (EVA), Fibre-reinforced Plastic (FRP), Glass-reinforced Plastic (GRP), Hydrogenated Acrylonitrile Butadiene Rubber (HNBR), Isobutylene Isoprene Rubber (IIR), Isoprene Rubber (IR), Metal, Mild Steel, Natural Rubber, Nickel, Nitrile Butadiene Rubber (NBR), Nylon, Plastics, Polybutylene Terephthalate (PBT), Polyether Ether Ketone (PEEK), Polyethersulfone (PES), Polyethylene Terephthalate (PET), Polyphenylene Sulfide (PPS), Poly(p-Phenylene Oxide) (PPO), Rubber, Stainless Steel, Steel, Styrene Butadiene Rubber (SBR), Thermosetting Plastics, Zinc
Features: Boil Water Resistance, Bondability, Brake Fluids Resistant, Chemical Resistant, Easy To Apply, Excellent Adherence, Excellent Fuel Resistance, Excellent Substrate Adhesion, Fatigue Resistant, Good Adhesion, Good Glycol Resistance, Good Hot Oil Resistant, Grease Resistant, High Performance, High Temperature Performance, High Temperature Resistance, Hydraulic Fluid Resistance , Low Temperature Resistant, Minimal Mould Build Up, Oil Resistant, Pre-bake Resistance, Solvent-Based, Steam Resistant, Very Good Heat Resistance

Cilbond® 12E is a solvent-based primer with high-temperature resistance. It provides excellent corrosion resistance and substrate protection. It is used in conjunction with CILBOND 80ET as a high-performance primer for rubber-to-metal bonding. It offers outstanding temperature resistance, glycol resistance, and corrosion performance, making it suitable for high-temperature and aggressive environments. It is commonly used in the manufacturing of high-performance rubber-to-metal bonded parts in industries such as agricultural and construction machinery, MRO (maintenance, repair, and operations), aerospace, and automotive.

Cilbond® 4000 Diluent

Cilbond 4000 Diluent is a versatile thinner used to dilute Cilbond 40 series products. This blend of solvents ensures optimal sprayability, making it an excellent choice for adjusting the viscosity of adhesives for specific application requirements. Cilbond 4000 Diluent is ideal for use in the CASE industry, especially when modifying bonding systems for various substrates.

Cilbond® R-7296W

Cilbond R-7296W is a water-based primer, which may be used in combination with Cilbond cover-coat bonding agents to bond a wide range of elastomers to metal and plastic substrates during the moulding process. With the correct surface preparation, Cilbond R-7296W will prime the following metal substrates: Mild and Stainless Steel, Aluminium, Brass, Galvanised / Zinc Coated Steel, Chromated Zinc and Phosphated Steel. Cilbond R-7296W will also prime polar plastics including nylons, polyesters, cellulosics, PPO, PPS, PES,PEEK, GRP/FRP, epoxies and phenolics, etc. Cilbond R-7296W is particularly versatile when used with the water based cover-coats Cilbond 70W or Cilbond R-7290W, but can also be used under the solvent-based cover-coat Cilbond 80ET to bond NR, SBR, IR, BR, CR, IIR, EPDM, NBR, HNBR and Vamac. Bonds have excellent resistance to extreme environments and aggressive liquids such as glycols, oils and brake fluid.

Cilbond® 33C A/B

RTU Product Type: 2K (2 component) Adhesive, Solventborne Adhesive
Application Area: Gaskets, Hoses, Oil Seals, Rollers, Shaft Seals, Valve Seals
Compatible Substrates & Surfaces: Fabrics, Fluoroelastomer (FKM), Metal, Thermoplastics
Application Method: Brush, Dip Coating, Spray
Features: Brake Fluids Resistant, Diluted Acid Resistant, Diluted Alkali Resistant, Excellent Performance, Good Glycol Resistance, Good Lubricant Resistance, Good Solvent Resistance, Heat Resistance, High Temperature Performance, High Temperature Resistance, Solvent-Based, Transmission Oil Resistance

Cilbond® 33C A/B is a solvent-based bonding agent designed for bonding FKM elastomers to metal and other substrates in high-temperature applications. It offers a two-pack formulation that can be applied as a one-coat system for convenience. The adhesive provides superior temperature resistance and ensures durable and reliable bonds. Cilbond® 33C A/B is used in rubber-to-metal bonding applications such as seals, gaskets, and O-rings in industries that require high-temperature performance.

Brand Summary

Chemical Family: Polyesters,

Polyurethanes (PU)

RTU Product Type: 2K (2 component) Adhesive,

Solventborne Adhesive

Application Area: Gaskets,

Hoses,

Oil Seals,

Rollers,

Shaft Seals,

Valve Seals

Compatible Substrates & Surfaces: Aluminum,

Brass,

Butadiene Rubber (BR),

Butyl Rubber,

Carboxylated Nitrile Butadiene Rubber (XNBR),

Cast Iron,

Cellulose,

Ceramic,

Chlorinated Polyethylene (CPE),

Chloroprene Rubber (CR),

Chlorosulfonated Polyethylene Synthetic Rubber (ACSM),

Elastomers & Rubbers,

Epichlorohydrin Rubber (ECO),

Epoxies,

Ethylene Acrylic Rubber (AEM),

Ethylene Propylene Diene Monomer (EPDM),

Ethylene Propylene Rubber (EPM),

Ethylene Vinyl Acetate (EVA),

Fabrics,

Fiberglass,

Fibre-reinforced Plastic (FRP),

Fluoroelastomer (FKM),

Fluoropolymer Surfaces,

Fluorosilicone Rubber (FVMQ),

Glass,

Glass Fibre Reinforced Polymer (GFRP),

Glass-reinforced Plastic (GRP),

Hydrogenated Acrylonitrile Butadiene Rubber (HNBR),

Isobutylene Isoprene Rubber (IIR),

Isoprene Rubber (IR),

Metal,

Mild Steel,

Natural Rubber,

Nickel,

Nitrile Butadiene Rubber (NBR),

Nitrile Rubber,

Nylon,

Perfluoroelastomer (FFKM),

Plastics,

Polyacrylate Rubber (ACM),

Polyamide,

Polybutylene Terephthalate (PBT),

Polyesters,

Polyether Ether Ketone (PEEK),

Polyethersulfone (PES),

Polyethylene Terephthalate (PET),

Polynorbornene,

Polyoxymethylene (POM),

Polyphenylene Sulfide (PPS),

Poly(p-Phenylene Oxide) (PPO),

Polyurethane,

Rubber,

Silicone,

Silicone Rubber,

Silicone Rubber Vinyl Methyl Silicone (VMQ),

Stainless Steel,

Steel,

Styrene Butadiene Rubber (SBR),

Thermoplastic Polyurethane Elastomer (TPU),

Thermoplastics,

Thermosetting Plastics,

Zinc

Application Method: Brush,

Dip Coating,

Roll Coater,

Spray

Features: Acid Resistant,

Alkali Resistant,

Boil Water Resistance,

Bondability,

Brake Fluids Resistant,

Chemical Resistant,

Chipping Resistance,

Corrosion Resistant,

Diluted Acid Resistant,

Diluted Alkali Resistant,

Easy To Apply,

Ethylene Glycol Resistance,

Excellent Adherence,

Excellent Bond Performance,

Excellent Fuel Resistance,

Excellent Mineral Oil Resistance,

Excellent Performance,

Excellent Salt Spray Resistance,

Excellent Substrate Adhesion,

Fast Drying,

Fatigue Resistant,

Fuel Resistant,

Good Adhesion,

Good Bonding Strength,

Good Cold Resistance,

Good Fuel Resistance,

Good Glycol Resistance,

Good Hot Oil Resistant,

Good Lubricant Resistance,

Good Solvent Resistance,

Good Toughness,

Grease Resistant,

Heat Resistance,

High Fatigue Resistance,

High Hydrolytic Stability,

Highly Versatile,

High Performance,

High Temperature Performance,

High Temperature Resistance,

Hot Water Resistance,

Hydraulic Fluid Resistance ,

Impact Resistance,

Improved Adhesion,

Improves Environmental Resistance,

Ink Resistance,

Kerosene Resistance,

Low Temperature Resistant,

Low VOC,

Minimal Mould Build Up,

Non-Blocking,

Non Staining,

Non-Wiping,

Oil Resistant,

Petrol Resistance,

Pre-bake Resistance,

Propylene Glycol Resistance,

Solvent-Based,

Steam Resistant,

Tack-free,

Temperature Resistance,

Transmission Oil Resistance,

Very Good Heat Resistance,

Water-based,

Water Resistant

Brand Summary

Browse by