H.B. Fuller

Applications & Uses

Application Instructions

Combine resin and activator in equal volume and mix thoroughly. For convenience and accuracy use pre-measured cartridges with disposable static mixers. Open time is 20 - 25 minutes at room temperature. Handling strength within approximately 90 - 120 minutes.
Consult the packaging instructions on proper preparation, application and clean up.

Features

Ready-to-Use Product Features: Excellent Flexibility,

Excellent Toughness,

Fast Curing,

Good Adhesion,

Good UV Resistance,

High Impact Resistance,

Medium Viscosity,

Paintable,

Shock Resistant,

UV Resistant,

Long Open Time,

Peel Resistance,

Thermal Cycle Resistance

Features & Benefits

Labeling Claims

Solvent-free,

Sustainable

Key Attributes

Excellent adhesion to plastics and metals
Great impact resistance and peel strength
Matches white PVC trim boards
Paintable, sandable and UV resistant
Longer open time for larger applications
Easy to apply and solvent free
Fills nail holes and gaps up to 3/8"
Meets 2009 EPA VOC & CARB requirements

Product Highlights

PVC TrimWelder™ Slow Cure adhesive does not require special surface preparation and does not contain any solvents.
It will work successfully in most applications without preparation. Our slow cure system is so strong that it appears to weld the PVC together.
This adhesive has a creamy consistency that will not foam, run or drip.
PVC TrimWelder™ Slow Cure is fast-curing, two-component product with an open time of 20 - 25 minutes at 73°F after thorough mixing with approved mix tips.
It will cure satisfactorily at application temperatures as low as 40°F.

Identification & Functionality

Product Information

Technology / Base	Two-component Methylmethacrylate (MMA)
Type of Product	MMA
Curing Mechanism	Polymerization
Appearance / Color	White
Consistency	Liquid

Packaging & Availability

Country Availability

USA

Packaging Type

Cartridges

Regional Availability

Asia Pacific
Europe
North America
Latin America
India/MiddleEast/Africa (IMEA)

Packaging Information

Side-by-side cartridges

Physical Properties

Color (Properties): White
Physical Form: Liquid
Appearance: White liquid

Properties

Density:

1010 kg/m³

Flash Point:

10.56 °C

Shear Strength:

23.18485 MPa

Shelf Life:

12 months

Specific Gravity:

1.01

Strain at Break:

60 %

Viscosity:

50000 cps

Cured Properties


	Value	Units	Test Method / Conditions
Adhesive Testing (on plastics, PVC, ABS glass filled nylon, stirene)	Substrate failure	-	-
Chemical Resistance (solid)	Excellent	-	-
Elongation (solid)	60	%	-
Film Thickness	0.03	inch	-
Hardness (solid)	75	Shore D	Shore Durometer Scale
Impact Strength (steel, solid)	20	ft·lb/in²	-
Lap Shear Strength (aluminum, solid)	3390	psi	-
Lap Shear Strength (grit blasted steel, solid)	3365	psi	-
Nominal Service Temperature (solid)	-65 to 260	°F	-
Peel Strength (aluminum, solid)	20 - 25	pli	-

Uncured Properties


	Value	Units	Test Method / Conditions
Flash Point (liquid)	51	°F	Cleveland Open cup
Mix Ratio (liquid)	1:1	-	-
Specific Gravity (at 20/20°C, liquid)	1.01	-	-
Toxicity (liquid)	Moderate	-	-
Viscosity (at 25°C, mixed, liquid)	50000	cPs	-

Typical Properties


	Value	Units	Test Method / Conditions
Base	Two-component Methylmethacrylate (MMA)	-	-
Open Time (at 73°F)	20 - 25	minutes	-
Storage Temperature	55 - 75	°F	-

Appearance

White liquid

Safety & Health

Safety Precautions: To minimize the risk of skin contact, we recommend the use of eye protection, gloves and protective clothing when working with this material. Prevent the build-up of vapors. Extinguish all sources of ignition during use.

Storage & Handling

Storage Information: Store in an unopened original container in a cool, dark area between 55°F to 75°F.
Shelf Life: 12 months

PVC TrimWelder™ Slow Cure

Enhanced TDS

Identification

Application Information

Applications