PVC TrimWelder™ Fast Cure

Identification

Chemical Family

Acrylics, Acrylates & Methacrylates,

Acrylics & Acrylates

GBU

BAS

RTU Product Type

2K (2 component) Adhesive,

Structural Adhesive

Categories

Markets → Building & Construction → Applications → Building Materials → Wood

Technologies → Adhesives & Sealants → Product Families → Functional Adhesives → Structural Adhesives

Applications

Application Area

Panels,

Composite Panel

Compatible Substrates & Surfaces

Ceramic,

Metal,

Wood,

Composites,

Stone,

Fiberglass,

Nylon,

Polyvinyl Chloride (PVC)

Applications & Uses

Typical Applications

Combine resin and activator in equal volume and mix thoroughly. For convenience and accuracy use pre-measured cartridges with disposable static mixers. Open time is 4 - 7 minutes at room temperature. Handling strength within approximately 10 - 30 minutes.

Features

Ready-to-Use Product Features

Excellent Flexibility,

Excellent Toughness,

Fast Curing,

Fast Setting,

Improved Adhesion,

Medium Viscosity,

Shock Resistant,

UV Resistant

Features & Benefits

Labeling Claims

Solvent-free,

Sustainable

Key Attributes

• Permanent unitizing structural adhesive
• Matches white PVC trim boards
• Paintable, sandable
• Fills nail holes and gaps
• Meets 2009 EPA VOC & CARB requirements

Product Highlights

• PVC TrimWelder™ Fast Cure adhesive does not require special surface preparation and does not contain any solvents.
• It will work successfully in most applications without preparation.
• It is so strong that it appears to weld the PVC together.
• This adhesive has a creamy consistency that will not foam, run or drip.
• PVC TrimWelder™ Fast Cure is a fast curing, two-component product with an open time of 4 - 7 minutes at 73°F after thorough mixing with approved mix tips.
• It will cure satisfactorily at application temperatures as low as 20°F.

Identification & Functionality

Product Information

Technology / Base	Two-component Methylmethacrylate (MMA)
Type of Product	MMA
Curing Mechanism	Polymerization
Appearance / Color	White
Consistency	Liquid

Packaging & Availability

Country Availability

USA

Packaging Type

Cartridges

Regional Availability

• Asia Pacific
• Europe
• North America
• Latin America
• India/MiddleEast/Africa (IMEA)

Packaging Information

Side-by-side cartridges.

Physical Properties

Color (Properties)

White

Physical Form

Liquid

Appearance

White liquid

Properties

Density:

1010 kg/m³

Flash Point:

10.56 °C

Shear Strength:

23.18485 MPa

Shelf Life:

12 months

Specific Gravity:

1.01

Strain at Break:

60 %

Viscosity:

50000 cps

Cured Properties

	Value	Units	Test Method / Conditions
Adhesive Testing (on plastics, PVC, ABS glass filled nylon, stirene)	Substrate failure	-	-
Chemical Resistance (solid)	Excellent	-	-
Elongation (solid)	60	%	-
Film Thickness	0.03	inch	-
Hardness (solid)	75	Shore D	Shore Durometer Scale
Impact Strength (steel, solid)	20	ft·lb/in²	-
Lap Shear Strength (aluminum, solid)	3390	psi	-
Lap Shear Strength (as received surface cold-rolled steel adherends, Solid)	2340	psi	-
Lap Shear Strength (grit blasted steel, solid)	3365	psi	-
Nominal Service Temperature (solid)	-65 to 260	°F	-
Peel Strength (aluminum, solid)	20 - 25	pli	-

Uncured Properties

	Value	Units	Test Method / Conditions
Flash Point (liquid)	51	°F	Cleveland Open cup
Mix Ratio (liquid)	1:1	-	-
Specific Gravity (at 20/20°C, liquid)	1.01	-	-
Toxicity (liquid)	Moderate	-	-
Viscosity (at 25°C, mixed, liquid)	50000	cPs	-

Typical Properties

	Value	Units	Test Method / Conditions
Application Temperature	20	°F	-
Base	Two-component Methylmethacrylate (MMA)	-	-
Handling Time	10 - 30	minutes	-
Open Time (at 73°F)	4 - 7	minutes	-
Storage Temperature	55 - 75	°F	-

Appearance

White liquid

Storage & Handling

Storage & Shelf Life

Store in an unopened original container in a cool, dark area between 55°F to 75°F. Shelf Life is 12 months

Shelf Life

12 months