Intrafol™ 1140/14 AMA UV

Identification

Chemical Family

Polyvinyl Chlorides (PVC)

GBU

BAS

RTU Product Type

Primer,

Solventborne Primer

Categories

Markets → Consumer Goods → Applications → Furniture

Technologies → Ready-to-Use Products → Product Families → Paints & Coatings → Primers & Sealers

Application Information

Cure Method

Physical Hardening

Applications

Application Area

Furniture,

Edge Banding

Application Method

Roll Coater

Compatible Polymers & Resins

Ethylene Vinyl Acetate (EVA),

Amorphous Polyalphaolefin (APAO)

Compatible Substrates & Surfaces

Polyvinyl Chloride (PVC)

Applications & Uses

Preparation Information

• The surfaces to be bonded must be dry, free of grease, free of dust and free of oil.
• Adhesive must be stirred well before use.

Processing Information

• Apply a thin and homogenous coat of Intrafol™ 1140/14 AMA UV on the plastic surface and dry the applied film. 
• For new materials or applications, the suitability must be confirmed by preliminary tests.
• Drying time - 20  to 40 seconds at 160°F, When applied to warm edge band, drying at room temperature may be sufficient.
• Suitable Substrates - Polyvinyl chloride (PVC)
• Suitable Adhesives - Edge banding hot melts (e.g. EVA, APAO, reactive PUR)
• Application Method - Roller coating
• Allow the coated substrate to cool to room temperature before winding it up.

Features

Ready-to-Use Product Features

Non-Blocking,

Fluorescent

Features & Benefits

Product Benefits

• Fluorescent (for process control)
• Non-blocking

Packaging & Availability

Regional Availability

• Asia Pacific

Physical Properties

Physical Form

Liquid

Storage & Handling

Storage Information

• Intrafol™ 1140/14 AMA UV should be used within the shelf life specified on the packaging.
• The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).