Cilbond® 12E

Identification

Carrier

Solvent-based

GBU

EA

RTU Product Type

1K (1 component) Coating,

Primer,

Solventborne Coating,

Bonding Agent,

1K (1 component) Adhesive

Categories

Markets → Automotive & Transportation → Applications → Automotive → Electrical & Electronic Systems

Markets → Automotive & Transportation → Applications → Bonding & Assembly

Markets → Automotive & Transportation → Applications → Transportation → Aerospace & Aviation

Markets → Industrial → Applications → Chemical & Industrial Manufacturing → Equipment & Parts

Markets → Industrial → Applications → Chemical & Industrial Manufacturing → Industrial Adhesives & Sealants

Markets → Industrial → Applications → Maintenance, Repair & Overhaul

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Solvent-Based Reactive Adhesives

Technologies → Ready-to-Use Products → Product Families → Paints & Coatings → Primers & Sealers

Application Information

Cure Method

Heat Cure

Applications

Application Area

Rollers,

Gaskets,

Aerospace Applications,

Tank Lining,

Doors,

Belts,

Wheel,

Seals,

Couplings,

Electric Vehicle (EV),

Industrial Assembly,

Automotive Applications,

Pump Linings,

Transportation Application,

Bushes,

Suspension Mounts,

Torque Vectoring Device

Application Method

Dip Coating,

Brush,

Spray,

Roll Coater

Compatible Substrates & Surfaces

Metal,

Plastics,

Aluminum,

Brass,

Elastomers & Rubbers,

Steel,

Nickel,

Stainless Steel,

Zinc,

Nylon,

Ethylene Propylene Diene Monomer (EPDM),

Styrene Butadiene Rubber (SBR),

Chloroprene Rubber (CR),

Natural Rubber,

Polyethylene Terephthalate (PET),

Cast Iron,

Polybutylene Terephthalate (PBT),

Ethylene Vinyl Acetate (EVA),

Chlorosulfonated Polyethylene Synthetic Rubber (ACSM),

Nitrile Butadiene Rubber (NBR),

Isobutylene Isoprene Rubber (IIR),

Isoprene Rubber (IR),

Fibre-reinforced Plastic (FRP),

Glass-reinforced Plastic (GRP),

Chlorinated Polyethylene (CPE),

Ethylene Acrylic Rubber (AEM),

Epichlorohydrin Rubber (ECO),

Hydrogenated Acrylonitrile Butadiene Rubber (HNBR),

Carboxylated Nitrile Butadiene Rubber (XNBR),

Poly(p-Phenylene Oxide) (PPO),

Polyether Ether Ketone (PEEK),

Polyethersulfone (PES),

Polyphenylene Sulfide (PPS),

Thermosetting Plastics,

Mild Steel,

Rubber

Segment

Rubber to Metal

Applications & Uses

Processing Information

Suitable Elastomers

• Natural rubber (NR)
• Styrene butadiene rubber (SBR)
• Chloroprene Rubber (CR)
• Polybutadiene (BR)
• Synthetic polyisoprene rubber (IR)
• Polyepichlorohydrin (ECO)
• Polyacrylate rubbers (ACM)
• Chlorosulphonated polyethylene (CSM / ACSM)
• Carboxylated NBR (XNBR)
• Ethylene vinyl acetate EVA (EVM)
• HNBR
• IIR
• EPDM
• Millable polyurethane (PU)
• Chlorinate polyethylene (CPE)
• Halogenated butyl rubber (CIIR or BIIR)
• NBR

Suitable Substrates

• Various surface treated metals
• Glass fibre reinforced plastic (GFRP)
• Various metals
• Polyamide (PA)
• Polyester (PES)
• Thermosetting plastics
• Various other substrates

Consistency

• Liquid

Surface Requirements

• Free of rust
• Grit blasted or other approved surface treatments
• Dry
• Clean
• Free of grease
• Free of dust
• Free of oil

Application Method

• Spraying
• Dipping
• Roller coating
• Brushing

End Uses

Plastics & Elastomers End Uses

Window Seals

Features

Ready-to-Use Product Features

Bondability,

Chemical Resistant,

Excellent Fuel Resistance,

Excellent Substrate Adhesion,

Fatigue Resistant,

Good Adhesion,

Good Glycol Resistance,

Grease Resistant,

High Performance,

High Temperature Resistance,

Low Temperature Resistant,

Oil Resistant,

Steam Resistant,

Very Good Heat Resistance,

High Temperature Performance,

Pre-bake Resistance,

Solvent-Based,

Easy To Apply,

Excellent Adherence,

Boil Water Resistance,

Good Hot Oil Resistant,

Hydraulic Fluid Resistance ,

Minimal Mould Build Up,

Brake Fluids Resistant

Features & Benefits

General Properties

Product Benefits

• Excellent resistance against salt-spray, water immersion, boiling water, steam up to 130°C, hot oils, fuels, glycols and hydraulic fuels up to 180°C
• Resistant to various chemicals, such as petrol, oils, greases
• Excellent static and dynamic fatigue resistance
• Excellent adherence to various substrates
• Easy application
• Minimal mould fouling
• Excellent pre-bake resistance
• Can be used for post vulcanisation bonding
• Coated parts can be swaged
• Excellent heat resistance
• Excellent low temperature resistance

Type of Product

• Bonding agent
• Used as a primer for other Cilbond grades
• Cilbond 12E R-7287 can be used as a one coat for NR, SBR, CR, CSM and AEM

Curing

• Heat curing

Color

• Grey

Packaging & Availability

Regional Availability

• Asia Pacific
• Europe
• Global
• North America
• Latin America
• India/MiddleEast/Africa (IMEA)

Physical Properties

Physical Form

Liquid

Appearance

Grey liquid

Properties

Typical Physical Properties

	Value	Units	Test Method / Conditions
Bonding Temperature Range	130 - 235	°C	-
Flash Point	9	°C	Abel Pensky Method
In-Service Temperature Resistance	-50 to 200	°C	-
Non-Volatile Solids	24	Wt(%)	-
Specific Gravity	0.98	-	-
Typical Coverage	20	m²/L	-
Viscosity	17	seconds	No. 3 Zahn Cup
Viscosity	30	seconds	DIN 4 Cup

Physical Properties

	Value	Units	Test Method / Conditions
Density	0.98	g/cm³	-
Solid Content	25	wt. %	-

Appearance

Grey liquid

Storage & Handling

Storage Information

Cilbond 12E R-7287 should be used within the shelf life specified on the packaging. The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature)

Shelf Life

12 months