FULLABOND VL580

Identification

GBU

HHC

RTU Product Type

Adhesive

Categories

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Contact Adhesives

Applications

Application Area

Lamination,

Board

Application Method

Roller,

Wheel

Compatible Substrates & Surfaces

Foils

Segment

Flexible Packaging

Applications & Uses

Application Instructions

• FULLABOND VL580 is primarily designed to be applied by roller or wheel.
• For optimum performance this product should be used within operating temperatures of 15°C to 30°C.Ensure substrates are free form oils dirt or grease.

Features

Ready-to-Use Product Features

Water Resistant,

Long Open Time,

Good Initial Tack,

Medium Setting Speed,

High Tack,

Good Grab

Features & Benefits

Product Benefits

FULLABOND VL 580 has a high initial tack level and good grab. It has a medium set speed and has a fair degree of water resistance

Packaging & Availability

Regional Availability

• Asia Pacific

Physical Properties

Physical Form

Emulsion

Properties

Typical Properties

	Value	Units	Test Method / Conditions
Raw Material Base	Synthetic polymer emulsion	-	-
Solids Content	approx. 57	%	-
Specific Gravity	approx. 1.08	-	-
Storage Temperature	15 - 30	°C	-
Viscosity (at 25°C, spindle 3, 20rpm)	2,800 - 3,500	cPs	-
pH	6.5 - 8.5	-	-

Application Properties

	Value	Units	Test Method / Conditions
Application Temperature	15 - 30	°C	-

Storage & Handling

Storage Conditions

Product should be stored in the original container out of direct sunlight between 15°C and 30°C and be protected from freezing. Rotate stock using oldest batches first. Close containers air tight after use.

Shelf Life

12 months