H.B. Fuller

Categories: Markets → Printing & Packaging → Applications → Tapes, Labels & Adhesives → Case & Carton Sealing

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Hot Melt Nonreactive Adhesives

Application Area: Trays,

Cartons,

Cases,

Case Sealing,

Folding Box,

Paper Packaging
Segment: Case and Carton Sealing

Application Method: Application temperature is 160 - 180 ̊C. Maintain pre-melting tank at 3⁄4 full. Avoid sudden condition of excessive solid hot melt as this will lower the tank temperature significantly. Surface to be bonded must be clean, dry and free from dust, oil, grease and dirt. Do not mix with other adhesives.

Ready-to-Use Product Features: Cost Effective,

Excellent Performance,

Excellent Substrate Adhesion,

Fast Setting,

Food Contact Acceptable,

Good Adhesion,

Good Bonding Strength,

Good Thermal Stability,

Heat Resistance,

High Performance,

Low Color Formation,

Low Density,

Low Migration,

Low Odor,

Machinable,

Wide Temperature Operating Range,

Reduced Carbon Dioxide,

High Mileage

Labeling Claims

Sustainable

Application Information

Excellent performance on high-speed production lines
Reliably consistent performance that enables your production team to focus on higher-value tasks
Strong bonding performance using significantly less adhesive
Close the same number of cases using at least 25% less adhesive
Reduced usage on every case reduces the CO footprint impact
Internal studies show 100kg of adhesive bonds 89,000 cases, saving the CO₂ equivalent of a 715km truck journey
Indicative comparisons show significant reductions

Product Characteristics

The characteristics of this product are as follows:

Low density hot melt adhesive designed to deliver high quality performance at reduced add-ons.
Fast speed of set
Low color and odor
Good thermal stability
Clean machining
Good adhesion performance over a wide temperature range

Regional Availability

Typical Properties

Application Properties


	Value	Units	Test Method / Conditions
Application Temperature	160 - 180	°C	-

Appearance

White pastille

Safety Information: To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize the risk of flammable vapors, do not exceed a melt temperature above 400°F. Prevent the build-up of vapors. Extinguish all sources of ignition during hot melt use.

Storage Information: This product is stored under clean and dry conditions below 40°C.
Shelf Life: 24 months

Advantra® Earthic™ 9500S