1K Liquid Reactive Adhesives

H.B. Fuller EA6056 is a fast UV-cure adhesive designed for waterproof applications. It is a very soft material when cured. This product has shown excellent adhesion and is flexible. It can be used to replace a silicone ring for buffering and waterproof applications.

Flextra® WD4127LV is a one-part system adhesive with a fast cure speed and a long pot life. It exhibits good adhesion to foil and is commonly used for flexible packaging applications, including bonding paper to film, paper to foil, and paper lidstock.

Cilbond® 24 is a one-coat rubber-to-metal adhesive designed for general-purpose elastomers. It provides superior performance compared to standard primer and topcoat solutions. This adhesive offers significant process improvements and delivers long-term end-use performance. One of the key advantages of Cilbond® 24 is its exceptional corrosion protection, which helps enhance the durability and longevity of bonded parts.

H.B. Fuller EA6203 is a fast UV-cured adhesive with high viscosity. It is a general-purpose, one-component adhesive that does not require mixing. This product is suitable for bonding a wide variety of substrates, including glass, many plastics, and most metals. H.B. Fuller EA6203 has shown excellent adhesion and is flexible.

Cyberbond CB 2008 is a cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The aging properties of these joints are outstanding. The overall properties made CB 2008 (like CB 2006) a favorable EPDM bonder. Compared to CB 2006, the viscosity is slightly lower. The low viscosity allows for very thin bonding layers.

Swift®lock 9053 is a single-component, fully reactive hot melt polyurethane adhesive that cross-links through a chemical reaction with moisture found in the surrounding air and substrates, resulting in a thermoset adhesive. It was specifically formulated for use in the assembly of recreational vehicle subcomponents, such as skins, composite walls, floors, ceilings, and front caps.

H.B. Fuller 13431 is a one-component, sprayable and coatable, water-based, polychloroprene contact adhesive with high flame retardancy. Additionally, a two-component option is available, providing additional processing flexibility. This adhesive is used for bonding foams and foam fabrication, including open-cell polyurethane foam.

Körapur® 177 is a one-component, flexible and high-performance direct glazing sealant designed for vehicle glass. The product is a polyurethane-based sealant that prevents contact corrosion in aluminum-body vehicles and is suitable for use with integral aerials. It has good stability and workability, with a non-sag consistency that makes it easy to apply.

SILAPRENE® Royal Seal 1000 Adhesive/Sealant DC13011 is an exceptional one-part product that combines ease of application, versatility of use, high ultimate strength, permanent bonds and long service life. It is a high quality, elastomeric sealant that provides superior adhesion to a variety of surfaces.

Cyberbond CB 2800 is a very fast-setting cyanoacrylate with extremely good properties for bonding rubber (especially EPDM) and plastics with each other or in combination. The aging properties of these joints are outstanding. CB 2800 is a grade with a very low viscosity that shows wicking properties. It is also known as CB 2000 W.

H.B. Fuller FH8302 is a single-component, heat-curable epoxy underfill encapsulant designed for flip-chip applications such as system-in-package and modules. It is designed for high adhesion and reliability. FH8302 is formulated to flow consistently without voids on die sizes up to 12 x 12 mm. This material can also improve the reliability of chip scale packages (CSP) and ball grid array (BGA) package assemblies.

H.B. Fuller FH8731 is a one-part epoxy potting material designed for the encapsulation of electronic parts. It features easy handling due to its one-part formulation, good stability, and fast curing at medium temperature. It is typically used for the encapsulation and protection of electronic parts.

H.B. Fuller EA6033 is a fast UV-cure adhesive. This product is suitable for bonding a wide variety of substrates, including glass, many plastics, and most metals. H.B. Fuller EA6033 has shown excellent adhesion and is flexible. It can be used for BGA reinforcement.

Rakoll® 2352M is a water-based, one-component adhesive known for its high water resistance. It falls under the category of 1K (1 component) adhesives and is commonly used in the furniture industry, particularly for cabinetry and lamination applications. This adhesive is available in both North America and Latin America regions.

Icema™ 145/31 is a liquid-reactive, 1-component PU adhesive known for its versatile and strong bonding properties. It is specifically designed for panel manufacturing applications, including fire doors and engineered panels. This adhesive is widely used in the industry for its reliable performance.