Products

RBUV213A is a single-component, low-viscosity anaerobic thread-locking adhesive with a UV-initiated surface cure component. It prevents the loosening and leaking of threaded fasteners and is ideal for preassembled components, where its low viscosity and capillary action allow it to wick into threaded assemblies. Additionally, RBUV213A can be used to fill porosity in welds and castings.

Tuskbond HGL100 - 500ml Aerosol is ideal for bonding glossy decorative laminate surfaces to a variety of substances, due to its even pebble spray pattern designed to give 100% coating. Tuskbond HGL100 provides instant grab and excellent high heat resistance, whilst achieving excellent bond strength. https://youtu.be/ncEp_Dhku2c?si=lylnqVzKP6GKfLbj

Swift®therm 6830 is a hot-melt adhesive made of EVA. It exhibits high heat tack and good heat stability. It is commonly used for edge banding films of PVC, paper, polyester, veneer, and metal to particle board and fiberboard in the furniture components industry.

Swift®therm 3H119 belongs to the category of hot melt adhesives. It offers specific features and benefits that make it suitable for various applications. It is commonly used for cove-stick and countertop build-ups, providing a reliable bonding solution. One notable advantage is its high heat resistance, which helps to guard against movement or displacement in high-temperature environments. Swift®therm 3H119 is primarily used for countertop builds in applications such as kitchen cabinets and counters, ensuring a strong and durable bond.

Adcobond D18-221 is a range of high-performance, black, butyl, pressure-sensitive tapes. These tapes are extruded to conform to either round or flat profiles, adhering to specified dimensional tolerances. Unless otherwise specified, the material is protected on one side with a removable release liner.

Swift®col 9787, a tackified solvent-borne acrylic self-curing pressure-sensitive adhesive, is for premium graphic producers who require adhesion to a wide spectrum of substrates without compromising cohesion performance. Swift®col 9787 provides good aging properties and heat resistance, stability against plasticizers, and excellent shrinkage resistance, ensuring a good balance between cohesion and tack. This allows premium graphic producers to achieve excellent adhesion to various substrates (including PVC) and in many possible applications.

Lunatack™ HL 3415 is a thermoplastic hot melt adhesive known for its good melt stability and strong single sheet adhesion. It offers a high clamp effect and exhibits good resistance to both cold and heat. This adhesive is commonly used for spine gluing applications in the graphic arts and bookbinding industries, including brochures, paperbacks, magazines, and catalogs.

Thermonex® Clearbond 201-03AR is a ready-to-use contact adhesive known for its exceptional features, including excellent substrate adhesion, high durability, excellent performance, heat resistance, and easier processing. It primarily caters to the automotive and transportation markets, with a specific focus on applications within automotive interiors.

Swift®lock 2U340 is a single-component, fully reactive hot melt adhesive that cross-links through a chemical reaction with moisture found in the surrounding air and substrates, to produce a thermoset adhesive. It was specifically formulated for difficult to bond plastics, such as ABS and vinyl, to a wide variety of metals. It was designed to provide a good balance of properties. The rheology of the product gives excellent release from roll coaters and no stringing of adhesive. The open time of three minutes is sufficient for assembly of a wide variety of applications. Green strength development of greater than 50 psi in 15 seconds holds difficult substrates together after combining. Long term aging studies show excellent retention of adhesive properties.

Flextra® SF8400 + XR1700 is a universal two-part, solventless adhesive system formulated for one-day food safety on nylon and 24-hour pouching. This system provides superior bonding and metal adhesion, as well as one-day PAA decay. It has excellent long-term adhesion to metal and performs well with high-slip films. It is suitable for a variety of flexible food packaging applications, including hot fill, boil-in-bag, microwave reheat, and pasteurizable.

Flextra® SBA 1010 CH Mono is an advanced adhesive solution that offers superior bonding strength and long-lasting durability in industrial applications. It is particularly effective in automotive, aerospace, and packaging industries where high-performance bonding is critical. This adhesive ensures reliable adhesion even under challenging conditions, providing dependable results.

Tuskbond XPR0 FR - 22L Canister is a fire-rated multipurpose sprayable contact adhesive ideal for bonding a wide variety of substrates. XPR0 provides incredible grab, high bond strength and excellent heat resistance. It is easy to apply and combines a long open time with a fast drying time. XPR0’s unique solvent system provides high performance with lower health hazards compared to traditional Non-Chlorinated alternatives. ● https://youtu.be/-VOa8H8if_s?si=FHJknwsAOp4M6HjJ

Flextra® SBA 5250 + XA 3350 is a high-performance, solvent-based, two-component aliphatic polyurethane adhesive system engineered for demanding flexible packaging applications. It offers superior bonding strength, supports high-speed lamination, and cures effectively at room temperature. With high solids content, it enhances productivity while reducing emissions. Fully compatible with PP flexible recycling, it also meets broad food safety standards, including FDA and EU compliance.

Tuskbond HH550 - 500ml Aerosol is a high heat sprayable contact adhesive, with heat resistance over 105 ̊C. Developed to bond a wide variety of substrates, HH550 has a long open time and provides a fast and strong permanent bond with excellent heat resistance. The adhesive is Approved by the manufacturer for use with Hanex Solid Surfaces.