Products

Advantra® PHC-8290 is a hot melt adhesive typically used in cases, cartons, trays, bliss boxes, and high-springback containers. It ensures superior bonding, thermal stability, clean machining, and a low total cost of ownership. Even at extremely low temperatures, this hot melt adhesive offers the sealing advantage your business needs.

Foster® Cryogenic Adhesive 82-77 is a chemically curing adhesive with the capability to achieve high tensile strength and adhesion at room temperature. It effectively bonds to a range of surfaces, including metal, wood, and masonry. This adhesive is supplied in a virtually 100% solids form, facilitating immediate bonding for non-porous surfaces without the risk of solvent entrapment issues.

Childers® Chil-Pruf™ CP-22 Insulation Coating is a reliable asphalt-based cutback coating reinforced with fibers. It is designed as a vapor retarder coating, typically applied over insulation materials on piping and equipment that operate at low to moderately high temperatures. When applied correctly, Chil-Pruf™ offers protection against atmospheric corrosives, chemical dust, fumes, fogs, and moisture.

Foster® Elastolar® Sealant 95-44 is a flexible, fire-resistant sealant formulated with butyl elastomer. This vapor barrier sealant is intended for sealing joints in insulation (excluding polystyrene foam), metal, and masonry applications where maintaining a water-tight and air-tight seal is essential. It is suitable for use as a joint sealant in low-velocity duct air-conditioning systems and is particularly effective in sealing the laps of metal jacketing to prevent moisture ingress.

Foster® Sealfas G-P-M® Mastic 45-00™ is a high-solids, water-based, general purpose mastic known for its superb trowel and spray capabilities. This product is utilized for safeguarding thermal insulation and hard, dry cement coatings, suitable for both indoor and outdoor applications.

Foster® Monolar® Coating 60-95 is a durable and flexible elastomeric finish specially formulated to protect outdoor thermal insulation. This coating contains chlorosulfonated polyethylene rubber. It serves as an effective vapor retardant for low-temperature insulation applications on tanks, pipelines, vessels, ductwork, and fittings.

Foster® Spark-Fas® Adhesive 85-20™ is a rapid-setting, non-flammable, fire-resistant synthetic elastomer adhesive. It is specifically utilized for bonding duct wrap, fibrous glass, or mineral wool insulations with densities of up to 6 lbs. to galvanized steel and aluminum air conditioning or hot air ducts. This adhesive is chosen when a fire-resistive dry film is necessary. It contains non-flammable chlorinated solvents, eliminating the risk of explosions and fires during the application process.

Childers® Chil-Perm® CP-30 Low Odor Vapor Retarder Coating is a highly effective coating designed for low-temperature applications. It has a unique consistency in its wet state, making it suitable for heavy or thin film applications. This coating is formulated with an elastomeric resin, resulting in a tough and flexible dry film with strong adhesive properties.

Foster® C.I. Mastic® 60-26 is a resilient and durable asphalt cutback mastic with high solids content. It serves as an effective vapor retarder due to its low vapor permeance, making it an excellent surface coating for outdoor applications, particularly for low-temperature insulation.

Foster® H.I. Mastic® 90-07 is a durable protective weather coating specifically designed for outdoor use over thermal insulation when an economical breathing mastic is needed. This asphalt emulsion product is crack-resistant, even at critical right-angle bends during curing. It exhibits exceptional weathering stability, resulting in a firm and durable surface that withstands acids, alkalies, abrasion, and typical outdoor industrial conditions.

Foster® Drion® Contact Cement 85-75 is a fast-setting, water-resistant adhesive for sealing the laps of vapor barrier jackets and is also used for bonding materials to a variety of surfaces in applications where immediate adhesion and high initial adhesive strength are required.

Foster® S.M. Adhesive 81-10™ is a cost-effective and fast-setting synthetic elastomer adhesive designed for use with fibrous glass insulation, particularly suitable for insulation with a density of up to 3 lbs. per cubic foot. This adhesive is primarily used for bonding duct wrap and acoustical linings in air-handling ducts, offering an efficient and reliable solution for insulation applications.

Childers® VI-CRYL® CP-10 Weather Barrier Coating is a robust, fire-resistant, water-based mastic designed for various thermal insulation and insulating cement applications. With its high thixotropic property, it may appear dense but is simple to spread. This outdoor-rated coating is also UV-resistant, ensuring durability and protection against the elements.

Foster® 81-84NH Non-Halogenated Adhesive/Sealant is a two-component, high-strength thermosetting urethane adhesive that does not contain flammable solvents or halide-based components. This adhesive is specifically formulated for bonding various types of low-temperature insulation materials to each other as well as to metal and masonry substrates, including stainless steel.

Foster® Stic-Safe® Adhesive 85-15™ is a fast-setting synthetic elastomer adhesive tailored for affixing fibrous glass insulation (up to 6 lbs.) to sheet metal surfaces like galvanized steel or aluminum found in air-conditioning ducts, hot air ducts, and metal buildings. Foster® 85-15™ unique consistency facilitates quick and effortless brushing onto metal ducts and various other surfaces. Additionally, it serves as an effective adhesive for lap-sealing vapor barrier jackets.