Products

Swift®therm 8019 is a hot-melt thermoplastic adhesive specifically designed for spine applications. It has a low application temperature and forms a tough and flexible film. This high-performance adhesive is ideal for high-speed production environments. It is commonly used for high-speed spine gluing in both one-shot and two-shot systems, as well as in graphic arts and bookbinding.

FULLAMELT 6730 is a hot melt adhesive known for its long open time and white color. It is particularly suitable for bonding difficult substrates. With its high tack and extended repositionability, it provides excellent adhesion to a wide variety of substrates in graphic arts and bookbinding applications.

Optipur™ LT 100 is a reactive-chemistry polyurethane hot melt adhesive. It is characterized by its low application temperature and excellent single-sheet wetting capabilities. This adhesive is particularly suitable for binding difficult-to-bond paper stock. It is commonly used for spine gluing in one-shot systems, making it a valuable choice for graphic arts and bookbinding applications.

Lunatack™ HL 7216 is a thermoplastic hot melt adhesive known for its very strong high-tack adhesion. It exhibits excellent adhesion to difficult cover materials, making it suitable for side gluing and joint gluing applications in the graphic arts and bookbinding industries.

Lunatack™ HL 3415 is a thermoplastic hot melt adhesive known for its good melt stability and strong single sheet adhesion. It offers a high clamp effect and exhibits good resistance to both cold and heat. This adhesive is commonly used for spine gluing applications in the graphic arts and bookbinding industries, including brochures, paperbacks, magazines, and catalogs.

Adecol® CQ-712 is a permanent tack adhesive based on block copolymers and synthetic tackifier resins. It has excellent thermal resistance at the application temperature, not altering its adhesive properties and maintaining an optimal relationship between adhesion forces, cohesion, and flexibility. Excellent machine performance, allowing better applicability and finishing control.

FULLAMELT 2268C is a hot melt adhesive known for its removable pressure-sensitive adhesive properties. It leaves minimal to no staining and can be applied at a low temperature. It is commonly used for all-purpose inserting and inserting applications in graphic arts and bookbinding.

FULLABOND 214 LV is a low-viscosity water-based adhesive known for its aggressive grab and needle extrusion properties. It is commonly used for in-line gluing on web-based catalogs and can be applied with printed kraft papers at high speeds, making it suitable for graphic arts and bookbinding applications.

H.B. Fuller CHM 7216 is a yellowish hot-melt adhesive specifically designed as a side adhesive. It offers excellent bonding to difficult substrates, especially cover materials. This adhesive has a medium to long open time, allowing sufficient working time. It bonds well to a variety of different coated paperboard covers, making it suitable for applications in the graphic arts and bookbinding industries.

FULLAMELT 224 is a hot melt adhesive specifically designed for spine applications in soft covers, hardcovers, and magazines. The adhesive is white in color and has a lower viscosity. It creates strong bonds on a variety of paper stocks, forming a flexible film. It is ideal for use in graphic arts and bookbinding.

Swift®tak 5412 is a water-based emulsion adhesive that provides strong adhesion to a wide variety of case materials. It exhibits high wet tack and fast-setting properties. It is commonly used for casing-in book blocks in the graphic arts and bookbinding industries.

Lunatack™ HL 2268 is a pressure-sensitive hot melt adhesive known for its clean removal of tip-ons and excellent non-staining performance. It is commonly used for bonding inserts, such as postcards and samples, in magazines within the graphic arts and bookbinding industries.

FULLAMELT 121 is an economical hot melt adhesive designed for side seam applications. It effectively bonds to various challenging surfaces and different lacquers. The adhesive provides excellent adhesion, thermal stability, and heat resistance, making it suitable for graphic arts and bookbinding purposes.

Ipacoll™ BA 412 is a water-based emulsion adhesive known for its durable elastic film and high-strength bond. It offers clean machining on all perfect binders and demonstrates excellent roundability and fast setting speed. This adhesive is commonly used for perfect binding and gluing off brochures, paperbacks, and book blocks in the graphic arts and bookbinding industries.

Swift®therm 8011 is a hot-melt thermoplastic adhesive designed for spine applications. It offers high performance at a low application temperature. The adhesive forms a tough and flexible film and provides excellent visibility on rollers. It is ideal for high-speed production and is commonly used for high-speed spine gluing in one-shot and two-shot systems, as well as in graphic arts and bookbinding.