Products

Advantra® Earthic™ 9443CN water-based barrier coating is for paper coaters and packaging makers who want to improve recyclability of paperboard packaging by transitioning from polyethylene to water-based coatings while achieving Total Cost of Ownership (TCO) as similar to polyethylene as possible.

Advantra® Earthic™ 9403P water-based barrier coating is for paper coaters and packaging makers who want to improve recyclability of paperboard packaging by transitioning from polyethylene to water-based coatings while achieving Total Cost of Ownership (TCO) as similar to polyethylene as possible.

HydroArmor® 7770 is a water-based latex coating that provides lightweight and sound-dampening protection. It can be easily sprayed onto overhead and vertical surfaces to seal joints effectively. This coating is highly durable, even under the harshest service conditions. It is commonly used for lap sealing and sound deadening bonding to various materials such as cold-rolled steel, galvanized steel, stainless steel, primed steel, aluminum, fiberglass, and plywood. HydroArmor® 7770 belongs to the category of water-based coatings.

HydroArmor® 7755 is a sprayable latex coating designed for use on aluminum, fiberglass, cold-rolled steel, galvanized steel, and most metal primers. HydroArmor® 7755 is formulated to give very good corrosion protection when applied as thinly as 20 mils wet. This low viscosity, sag-resistant coating can be easily sprayed onto exposed underbody areas and into restricted areas such as tubing and "hidden" areas accessible only with spray wands. Wet film builds of 30 mils or more can be applied without runs, drips, or sags.

Foster® Full Defense™ Fungicidal Protective Coating 40-25 is designed to eliminate any remaining mold and mildew after pre-cleaning contaminated surfaces. It also provides protection to various building materials, including unfinished wood, drywall, oriented strand board, metal, masonry, and more, safeguarding them from fungal growth.

Foster® Eclipse™ Coating 40-11 is a low-odor, fast-setting, water-based surfacing material designed for field or shop application to faced or unfaced fiberglass duct liner or fiberglass duct board insulation. Its low viscosity enables application with a wide range of spray equipment available in the market.

HydroArmor® 7740 is a sprayable, latex product that is designed for use on steel, aluminum, fiberglass, and plywood. This highly fire-resistant material can be easily sprayed onto overhead and vertical surfaces to seal joints. Heavy wet film builds can be applied without causing runs, drips, or sagging at bridge seams. Because this material is filled with hollow microspheres, this coating adds little weight to vehicle bodies, even at high film builds.

Foster® Weatherite™ Mastic 46-50 is a fibrated, water-based breather mastic with a smooth, thixotropic consistency for easy application. It boasts a bright white color, is non-flammable when wet, and emits a mild odor during use. This mastic exhibits excellent brush, trowel, and spray properties.

Magik 40X25 is a premium quality, water-based, antimicrobial, and fungicidal protective coating. It prevents and eliminates residual mold and mildew from contaminated surfaces and protects various surfaces such as metal, GI, masonry, and wood from fungal growth. Formulated with a special type of synthetic resin and high-performance additives, Magik 40X25 is a low-odor coating designed to inhibit the growth and spread of odor-causing bacteria, mold, and mildew on multiple surfaces.

H.B. Fuller EV Protect 1000 is a sprayable water-based intumescent coating designed to add a layer of protection in case of a thermal event in a battery pack. When exposed to flames, the coating will create an insulative layer that prevents direct contact of the flames to the substrate’s surface. This layer provides insulation against the flames and helps slow heat transfer through the coated substrate. H.B. Fuller EV Protect 1000 is formulated to adhere to a variety of common battery pack substrates, including steel, aluminum, e-coat, and ABS plastic. This coating can be easily applied onto battery pack components, and wet film builds of 0.030" can be applied without runs, drips, or sagging.

PC4426MODBK is a single-component, solvent-based primer designed to maximize the anchorage of subsequently applied adhesives to various surfaces, including metal, glass, concrete, ceramics, select plastics, and most rigid or semi-rigid substrates. Widely used across the Mining, Mechanical Rubber, Plastic Goods and Aeronautic industries, PC4426MODBK meets strict primer requirements for diverse applications. Common uses include treating metals for concrete tanks, conveyor belts, vats, and pipes before applying adhesive bonded protective sheet liners. It is also used for priming plastic radomes for conductive, anti-static, and rain erosion protective coatings.

Childers® Chil-Perm® CP-30 Low Odor Vapor Retarder Coating is a highly effective coating designed for low-temperature applications. It has a unique consistency in its wet state, making it suitable for heavy or thin film applications. This coating is formulated with an elastomeric resin, resulting in a tough and flexible dry film with strong adhesive properties.

H.B. Fuller EV Therm 601 is a one-component UV curable technology that is thermally conductive, flame retardant, and electrically insulative. This material provides an optimum coating with a minimum coating thickness of 150 microns and encapsulation protection for electronic assemblies and components. This material was designed to be thermally conductive and is recommended for use with heatsinks, heat spreaders, cold plates, cooling tubes, and other thermal dissipation applications.

Advantra® Earthic™ 9441CN water-based barrier coating is for paper coaters and packaging makers who want to improve recyclability of paperboard packaging by transitioning from polyethylene to water-based coatings while achieving Total Cost of Ownership (TCO) as similar to polyethylene as possible.

UltraShield EMB 25 is a single-component, flexible, cold-applied, bitumen-modified acrylic-based waterproofing membrane. It is specially designed from a blend of special resin and rubber, reinforced with water-repelling fillers, mineral stabilizers, and a gelling agent. UltraShield EMB 25 is a highly elastic product that cures to a rubber-like membrane capable of withstanding severe expansion, contraction, and deck movements. It is highly resistant to oxidation, UV light, and ozone due to the unique additives used in its formulation, ensuring it does not crack.