Products

ProSpec® Slab Bedding Grout Rapid is an ultra-fast setting, non-shrink, high compressive strength grout designed for placing precast concrete slabs. It is non-metallic and provides strong load-bearing support.

ProSpec® High Strength Precision Grout is a ready-to-use, specially formulated grout that offers high strength and excellent flowability for precision applications.

ProSpec® Slab Dowel Grout is a non-shrink, high compressive strength grout, non-metallic, ideal for placing prefabricated concrete pavements and structural grouting applications.

ProSpec® Premium Patch 100 is a fast-setting, fiber-reinforced, high-strength cement-based repair mortar that provides quick early strength gain, minimizing downtime for repair applications.

ProSpec® BlendCrete® is a fast-setting, single-component, polymer-modified patching compound made with calcium aluminate cement, ideal for repairing concrete and masonry in horizontal, vertical, and overhead applications.

ProSpec® Premium Patch 200 is a rapid-setting, fiber-reinforced, high-strength cement mortar, polymer-modified for durable concrete repair and overlay applications.

TEC® Premixed Vinyl Tile Grout is a ready-to-use, premixed, sanded acrylic grout specially designed for vinyl tile applications. This grout grade is highly stain-resistant and is specifically formulated for grout joints ranging from 1⁄8 inch to 1⁄4 inch in width.

TEC® Level Set® LW-60 TA-053 is a calcium aluminate-based self-leveling underlayment, specifically designed for applications where the weight of materials is critical in load-bearing structures. It stands out as an ultra-lightweight, high-quality, and easy-to-handle self-leveling underlayment. It provides a flat, smooth, and durable surface for finished flooring installation while being only half the weight of conventional portland cement or gypsum-based underlayments, weighing just 60 pounds per cubic foot.

TEC® VersaPatch® Latex Modified Floor Patch and Leveler TA-327 is a rapid-setting cement-based solution, meticulously crafted for patching and repairing floor imperfections. This versatile product adeptly fills cracks, voids, seams, and depressions on various floor surfaces, ranging from featheredge up to 1/2" (12 mm) deep. With a smooth and level finish achieved through flat trowel application, this solution ensures a seamless, non-cracking surface. The resultant surface provides an optimal foundation for the installation of a range of flooring options, including sheet goods, resilient tile, carpet, wood, and ceramic or stone tile.

Childers® Chil-Glas® #5 Glass Fiber Reinforcing Mesh is a high-strength, open-weave, pre-sized fiberglass cloth treated with resin. It is used in combination with various coatings to provide reinforcement and control the thickness of the coating. Additionally, it helps bridge gaps, joints, and crevices in insulation.

Foster® Butylar™ NXT Vapor Barrier Jacketing is a self-sealing aluminum butyl membrane. It consists of a high-performance black butyl adhesive on a PET/AL/PET laminate film, providing minimal vapor permeance and protection against punctures and environmental damage. The black butyl adhesive is devoid of bitumen or asphalt compounds and incorporates built-in reinforcement for enhanced strength.

Foster® MAST-A-FAB® WHITE Reinforcing Membrane 42-24 features a synthetic fiber composition that offers enhanced elongation, recovery, and resistance to stress breakage. This membrane's leno weave design ensures fabric stability, eliminating the typical thread movement and distortion found in plain weave cloths. Importantly, it has no discernible impact on the flame spread and smoke-developed ratings of the chosen mastic or coating.

Foster® C.I. Wrap™ 30 Vapor Retarder Sheet Membrane is a flexible vapor retarder sheet membrane. It is constructed using synthetic rubber-modified asphalt laminated to a durable polymer film, featuring a treated peel-and-stick release liner for easy application. C.I. Wrap™ 30 offers the advantages of controlled film thickness, efficient and labor-saving application, elastomeric properties that accommodate insulation system expansion and contraction, self-healing capabilities, and a strong bond to both the substrate and sheet overlaps.

TEC® LiquiDam® EZ TA-214 is a one-part, highly engineered polymeric emulsion moisture mitigation formula. It is colored blue for visual assurance during application and requires two coats to fully seal the substrate. It dries quickly in as little as 3–4 hours and does not require a primer before applying TEC surface preparation products. TEC® LiquiDam® EZ TA-214 serves as a moisture vapor barrier for installing floor coverings, tiles, and stones.

TEC® Ultimate 6 Plus Mortar (487) is a high performance, polymer-modified, full-contact (full coverage) mortar designed for the installation of ceramic, porcelain, and natural stone tile. Unlike other mortars, Ultimate 6 Plus has a unique combination of features that allow grouting in 6 hours while providing extended open time. It is ideal for all gaged porcelain tile panels and slabs and large heavy tile (LHT) installations. Ultimate 6 Plus significantly reduces the need for back buttering and has exceptional non-sag / non-slump characteristics for wall and floor applications.