Products

Millennium Term Bar Tape (MT-0260) Black Butyl Tape is a permanently flexible butyl tape used underneath an EPDM waterproofing membrane where a termination bar will be installed. The product is easy to use and provides a cleaner application when compared to pumpable sealants. Millennium Term Bar Tape has excellent adhesion to a variety of surfaces, such as ABS, acrylic, aluminum, brick, concrete, epoxy, fiberglass, glass, steel, wood, rubber, and painted substrates. It also exhibits exceptional performance in low-temperature environments. All surfaces must be clean, dry, and free of foreign contaminants such as dust, oil, and loose paint before the application of Millennium Term Bar Tape.

Millennium EPDM Semi-Cured Cover Strip is a construction adhesive that consists of a semi-cured EPDM membrane that has been laminated to a 25-mil EPDM-based pressure-sensitive tape. This tape is comprised of vulcanized rubber adhesive that will provide OEM-quality performance for EPDM single-ply restoration projects.

ADCOSEAL DCC-1 is a group of extruded, elastomeric, butyl based patches that are designed to insulate, seal and waterproof automotive electrical wire harness joints and grommets. DCC-1 has good adhesion to polar (aluminum, glass and steel), non-polar (polyethylene and vinyl) and automotive paint surfaces.

Adcoseal 4193-3 is a pressure-sensitive mastic commonly laminated onto a plastic film or foil for ease of installation. It can be die-cut into various shapes as needed for specific applications. When paired with a suitable film or foil, this material can be applied before painting, with no adverse effects during bake cycles.

Adcobond D18-221 is a range of high-performance, black, butyl, pressure-sensitive tapes. These tapes are extruded to conform to either round or flat profiles, adhering to specified dimensional tolerances. Unless otherwise specified, the material is protected on one side with a removable release liner.

BX-301 Sealant Tape features a polyethylene film laminated to a 50 mil pressure-sensitive tape, offering extreme flexibility to fit irregular shapes and surfaces. It's designed to create watertight seals on properly primed concrete surfaces and structure joints.

Millennium EPDM Flashing Tape consists of an uncured EPDM membrane that has been laminated to a 25-mil EPDM-based pressure-sensitive tape. The tape is comprised of a vulcanized rubber adhesive that will provide OEM-quality performance for EPDM single-ply restoration projects. Millennium EPDM Flashing Tape is extremely flexible and can be formed to fit irregular shapes and surfaces. Due to the exceptional strength of the vulcanized rubber adhesive, Millennium EPDM Flashing Tape will not shrink, bridge, or delaminate due to stress or movement in the roofing system.

BX-043 Concrete Joint Sealant / Waterstop Tape is a flexible tape that seals concrete construction joints by expanding upon moisture contact. Made from a blend of butyl rubber polymers and bentonite clay, it offers superior expansion and sealing in concrete joints.

Adcoseal 4189-3 sound damping pad is a combination of energy-absorbing mastic material and an aluminum top layer that provides maximum sound damping. The mastic damping material converts vibratory energy into heat through extension and compression, effectively reducing noise levels on the treated substrate. The aluminum top layer maximizes this effect by redirecting any escaping vibratory energy back into the mastic layer.

GSSI® MH-19 Rubber Sealant Tape is a pressure-sensitive sealant tape extruded onto silicone release paper. MH-19 is widely used in the mobile home, RV, and modular construction industries wherever a watertight seal is critical, such as roof seams, roof-to-sidewall joints, vents, stacks, and gutter mountings.

Adcobond SCT-100 is a double-sided tape featuring a synthetic elastomer-based adhesive/sealant with a non-woven reinforcement layer. It maintains flexibility and easily conforms to irregular surfaces. This tape has a high tack level, forming strong bonds with various substrates such as polyethylene, EVA, EPDM, and automotive paint systems. Moreover, it establishes a permanent seal against moisture, dust, and air intrusion. The reinforcement layer adds strength and resistance to deformation.

Adcoseal 4193SHD is a pressure-sensitive mastic typically laminated onto a plastic film or foil to simplify installation. It can be die-cut into various shapes, accommodating the specific needs of the application. When used with a suitable film or foil, this material can be applied before painting, with no adverse effects during bake cycles.

H.B. Fuller AT-5 very high-bond strength acrylic tape is a pressure-sensitive, black, foam core acrylic tape system. It is designed to provide a superior bond between a wide variety of substrates. The tape possesses a uniform, high-tack acrylic adhesive on both surfaces and will bond to most clean, dry, oil-free substrates.

ST-30 is a flexible butyl joint sealant designed for sealing precast concrete, manholes, septic tanks, box culverts, concrete pipes, vaults, and vertical panels. It is permanently flexible, tacky, moisture-resistant, and durable against acidic and alkaline environments. Not for use in expansion joints or moving joints. Available in various sizes and shapes, it meets or exceeds ASTM C990 standards for butyl tapes.

Millennium EPDM Seam Tape is a black, vulcanized rubber, pressure-sensitive adhesive tape designed to provide high strength and watertight seams for single ply EPDM roofing membranes. Millennium EPDM Seam Tape is soft and tacky, providing a quick grab onto EPDM field membranes, yet possesses high initial strength. Millennium EPDM Seam Tape exhibits excellent adhesion to most substrates, including glass, metals, wood, concrete, masonry, and some plastics. This tape will provide OEM-quality performance for EPDM single-ply restoration projects.