Products

Tonsan STP1921 is a high quality, neutral, elastic single component adhesive/sealant based on Silane-terminated Polymer, which cures by reaction with moisture to an elastic product. The skin formation and curing time are dependent on humidity and temperature, and the curing time also depends on joint depth. By increasing the temperature and moisture these time can be reduced; low temperature as well as low moisture retard the process. STP 1921 is a good compromise between an adhesive and a sealant based on Silane-terminated Polymer. STP 1921 is suitable for elastic seal which also high strength is required. STP 1921 is odourless and free of solvents, isocyanates, silicones and PVC. It demonstrates good adhesion without primer to many substrates and is compatible with suitable paint systems. The sealant also demonstrates good UV resistance and therefore can be used for interior and exterior applications.

Tonsan MS1937 is a high quality, neutral, elastic single component adhesive/sealant based on MS-Polymer, which cures by reaction with moisture to an elastic product. The skin formation and curing time are dependent on humidity and temperature, and the curing time also depends on joint depth. By increasing the temperature and moisture these time can be reduced; low temperature as well as low moisture retard the process. MS1937 is a good compromise between an adhesive and a sealant based on MS-Polymer. MS1937 is suitable for elastic seal which also high strength is required. MS1937 is odourless and free of solvents, isocyanates, silicones and PVC. It demonstrates good adhesion without primer to many substrates and is compatible with suitable paint systems. The adhesive/sealant also demonstrates good UV resistance and therefore can be used for interior and exterior applications.

H.B. Fuller GI9633 is a two-part methacrylate adhesive designed for structural bonding of metals, plastic, and composite materials without surface preparation. Combined at a 1:1 ratio, it has a working time of 20 to 40 minutes and achieves approximately 50% of ultimate strength in 3 hours at 23°C. This product has designed for use on large structures where a moderate open time is needed. In addition, this product provides a unique combination of excellent fatigue endurance, outstanding impact resistance, and super toughness.

Tonsan TS805 High Strength Structural Adhesive is a two components, room temperature curing, 1:1 mix ratio by volume, methacrylate adhesive system. Cured layer has high toughness and good resistance to peeling off. Fixture time is 30 minutes. With good thixotropic property. The product is suitable for bonding a variety of substrates with a minimum of surface preparation.

Tonsan TS828 is a 10:1 ratio two-component methacrylate structural bonding adhesive. It is suitable for bonding various materials including metals and composite materials. The adhesive has fast curing speed, high strength after curing. Fixture time is 8~10mins under room temperature.