Products

Swift®col Health 9248 solvent-based acrylic, the pressure-sensitive adhesive, is for manufacturers of medical products and devices who want to adhere to skin.

Swift®col Health 9248 solvent-based acrylic, pressure-sensitive adhesive provides biocompatible regulatory support, conforming to ISO 10993 biocompatibility standards, including 10993-5 (tests for cytotoxicity) and 10993-10 (tests for skin irritation and sensitization), to ensure the safest solution for consumers skin.

This allows manufacturers of medical products and devices to access sprayable, crystal-clear adhesive solutions that adhere effectively to skin and substrate materials, enabling satisfaction for skin-sensitive consumers.

Swift®Col Health 9248 is suitable for roll coats, while its sprayable properties enhance application options and provide regulatory support.

SurgiSeal® Stylus Topical Skin Adhesive is made with a 2-octyl cyanoacrylate formulation, featuring superior tensile strength, which helps produce better clinical outcomes.

SurgiSeal adhesive forms a barrier on the skin, preventing bacteria and water from reaching the wound, reducing the chance of infection and allowing the patients to shower immediately.

The SurgiSeal adhesive formula is the only topical skin adhesive in the world to receive FDA 510k Clearance in demonstrating inhibition of gram positive and gram negative bacteria growth.

SurgiSeal Stylus comes in .5 ml and has several advantages, including rapid set time, flexibility without a plasticizer, ergonomic ampule designed for ease of handling, and a gravity fed applicator delivery system - no need to squeeze amplue.

Polymerization starts when adhesive comes in contact with tissue or fluid. All .5 ml of adhesive can be used on the patient, as adhesive will not solidify in the ampule. SurgiSeal will remain attached to the skin surface until natural cellular regeneration occurs (approx. 5-7 days). If needed, any standard adhesive remover product may be used to release the adhesive from the skin. Peel off the film, do not pull the skin apart.

H.B. Fuller U306 is a thixotropic, medicalgrade, light-cure adhesive that bonds extremely well to glass, metal, and a wide variety of plastics. It combines high viscosity and hardness, making it an ideal product for potting as well.

Material Bonding - Glass

Swift®col Health 9569 solvent-borne acrylic self-curing pressure-sensitive adhesive is for manufacturers of medical products and devices who want to adhere to skin.

Swift®col Health 9569 solvent-borne acrylic self-curing pressure-sensitive adhesive provides high cohesion and wettability combined with good aging, UV, and temperature resistance, in addition to outstanding performance on softer substrates while conforming to ISO 10993 biocompatibility standards, including 10993-5 (tests for cytotoxicity) and 10993-10 (tests for skin irritation and sensitization).

This allows manufacturers of medical products and devices to access a toluene-free adhesive solution that adheres effectively to skin and substrate materials with longer wear times.

Swift®col Health 9569 provides market-typical solids for effective drying costs and quick machine run rates for better OEE while ensuring the safest solutions for skin with biocompatible regulatory support.

Swift®melt Health 1715 is for manufacturers of medical labels and tags who want to adhere to skin.

Swift®melt Health 1715 provides robust peel-and-tack adhesion combined with low viscosity while conforming to the ISO 10993-5 biocompatibility standard.

This allows manufacturers of medical labels and tags to ensure the safest solutions for skin with biocompatible regulatory support.

Swift®col Health 9579 solvent-borne acrylic self-curing pressure-sensitive adhesive is for manufacturers of medical products and devices who want to adhere to skin.

Swift®col Health 9579 solvent-borne acrylic self-curing pressure-sensitive adhesive provides balanced adhesion and cohesion to deliver high wettability along with high tack to ensure timely bonding. This adhesive is certified as conforming to ISO 10993 biocompatibility standards, including 10993-5 (tests for cytotoxicity) and 10993-10 (tests for skin irritation and sensitization).

This allows manufacturers of medical products and devices to access a toluene-free adhesive solution that adheres effectively to skin and substrate materials.

Swift®col Health 9579 provides high solids to lower drying costs and quick machine run rates for better OEE while ensuring the safest solutions for skin with biocompatible regulatory support.

Swift®col Health 9799 toluene-free synthetic rubber solvent adhesive is for manufacturers of medical products and devices who want to adhere to skin.

Swift®col Health 9799 toluene-free synthetic rubber solvent adhesive provides the high tack, good flowability, and water resistance needed to secure a device or wearable to skin over the use period while ensuring 10993-5 cytotoxicity compliance.

This allows manufacturers of medical products and devices to confidently certify that products will stay in place or avoid prematurely releasing from skin under a variety of demanding use conditions so that the consumer does not have to change their device as frequently.

Swift®col Health 9799 also allows manufacturers to ensure the safest solutions for skin with biocompatible regulatory support.

Swift®melt Health 1705 pressure-sensitive hot melt adhesive is for manufacturers of medical tapes, bandages, skin patches, dressings, and medical device assemblies who want to adhere to skin.

Swift®melt Health 1705 pressure-sensitive hot melt adhesive provides medium peel and good tack while conforming to ISO 10993 biocompatibility standards, including ISO 10993-5, 10993-10I and 10S, Human Patch Test at 48 and 72 hours.

This allows manufacturers to access to an adhesive solution for a wide variety of application opportunities while ensuring the safest solutions for skin with biocompatible regulatory support.

Swift®melt Health 1711 pressure-sensitive hot melt adhesive is for manufacturers of EKG electrodes and wound care products who want to adhere to skin.

Swift®melt Health 1711 pressure-sensitive hot melt adhesive provides excellent bonding to skin with great tack while conforming to ISO 10993 biocompatibility standards, including ISO 10993-5, 10993-10I, and 10S, Human Patch Test at 48 and 72 hours.

This allows manufacturers of EKG electrodes and wound care products to access to an adhesive solution for a variety of application opportunities while ensuring the safest solutions for skin with biocompatible regulatory support.

SurgiSeal® Teardrop[ Topical Skin Adhesive is made with a 2-octyl cyanoacrylate formulation, featuring superior tensile strength, which helps produce better clinical outcomes.

SurgiSeal adhesive forms a barrier on the skin, preventing bacteria and water from reaching the wound, reducing the chance of infection and allowing the patients to shower immediately.

The SurgiSeal adhesive formula is the only topical skin adhesive in the world to receive FDA 510k Clearance in demonstrating inhibition of gram positive and gram negative bacteria growth.

SurgiSeal Teardrop comes in .35 ml with a broadset foam applictor tip and has several advantages, including rapid set time and flexibility without a plasticizer.

Polymerization starts when adhesive comes in contact with tissue or fluid. SurgiSeal will remain attached to the skin surface until natural cellular regeneration occurs (approx. 5-7 days). If needed, any standard adhesive remover product may be used to release the adhesive from the skin. Peel off the film, do not pull the skin apart.