Products

23 Products in Batteries

TDSWith TDS

RTU Product Type:2K (2 component) Coating
Features:Low Viscosity, Low Surface Tension, Excellent Substrate Adhesion, Thermally Conductive, Wide Temperature Cycling, Flame Retardant, Easy To Dispense
Application Area:Capacitors, Heat Spreader, Electronic Components, Electronic Assemblies, Heat Sink
Compatible Substrates & Surfaces:Plastics, Metal
Chemical Family:Acrylics & Acrylates

EV Therm 602 is a two-component, thermally conductive, flame retardant UV curable resin system. It is designed for applications requiring both heat dissipation and flame resistance, offering durability and reliability in demanding industrial environments.

H.B. Fuller EV Seal 500

RTU Product Type:1K (1 component) Sealant, Hot Melt Sealant, Pressure Sensitive Adhesive
Application Area:Form In Plastic Gaskets (FIPG), Electric Vehicle (EV), Cure In Place Gasket, Gaskets, Batteries, Battery Packs
Compatible Substrates & Surfaces:Cast Iron, Aluminum, Metal, Steel
Features:CTE Absorption, Vibration Resistance, Dust Resistance, Shock Absorbent, Ease Of Use, Wide Temperature Operating Range, Moisture Resistant, Fast Setting

H.B. Fuller EV Seal 500 is a thermal plastic hot melt PSA designed for use in gasketing and sealing applications. It is especially suitable for sealing battery pack modules where accessibility and serviceability are a high priority. With the resealable nature of this material, repeated opening and closing of a battery enclosure is simple, easy, and reliable. The EV Seal 500 offers a robust solution for preventing dust and moisture intrusion into any enclosure. This material is recommended for use with steel, aluminum, and cast iron.

H.B. Fuller EV Bond 300

RTU Product Type:Structural Adhesive, 2K (2 component) Adhesive
Application Area:Electric Vehicle (EV), Batteries, Battery Management System (BMS), Battery Casing
Compatible Substrates & Surfaces:Composites, Plastics, Metal
Chemical Family:Polyurethanes (PU)
Features:CTE Absorption, Thixotropic, Shock Absorbent, Room Temperature Curing, High Flexibility, Good Impact Strength, High Impact Resistance, Low Temperature Performance, High Elongation, Vibration Damping, Good Shrinkage Resistance

H.B. Fuller EV Bond 300 is a structural adhesive, designed for electrical and electronics applications, specifically for parts and components in batteries and electric vehicles (EVs).

H.B. Fuller EV Therm 288

Application Area:Electric Vehicle (EV), Electric Vehicle (EV) Batteries, Battery Packs, Batteries
Compatible Substrates & Surfaces:Metal, Galvanized Steel, Aluminum Alloys
Features:Water Resistant, Corrosion Resistant, Easier Processing, Electrical Insulation Properties, Fast Curing, Low Bond Strength, Good Thermal Conductivity, Impact Resistance
Color (Properties):Grey

H.B. Fuller EV Therm 288 is a silicone-free gap filler, formulated exclusively for EV battery environments. This thermal interface material cures at room temperature or is accelerated with heat and provides excellent thermal conductivity, electrical insulation, water resistance, corrosion resistance, and impact resistance properties.

H.B. Fuller EV Bond 705

Application Method:Extrusion, Spray, Slot-Die, Roller, Bead
Compatible Substrates & Surfaces:Film, Nylon, Metal, Polyethylene Terephthalate (PET), Glass
Features:Light Weight, Excellent Multi-Substrate Adhesion, Good Adhesion, Low Viscosity

H.B. Fuller EV Bond 705 is a low viscosity non-reactive hot melt pressure sensitive adhesive (PSA) with aggressive tack and good adhesion to various substrates. Its Low viscosity allows for precise application at a wide range of production speeds in EV pouch cell battery bonding or as a process aid in EV Battery construction.

H.B. Fuller EV Therm 440 GB

RTU Product Type:Reactive Adhesive, Structural Adhesive, 2K (2 component) Adhesive
Application Area:Electric Vehicle (EV), Batteries
Compatible Substrates & Surfaces:Fiberglass, RIM Urethane, Acrylic, Polycarbonate (PC), Plastics, Gelcoat, Phenolics, Stainless Steel, Aluminum, Polyurethane, Coated Surfaces, Metal, Epoxies, Acrylonitrile Butadiene Styrene (ABS)
Cure Method:Air Dry
Chemical Family:Acrylics & Acrylates

H.B. Fuller EV Therm 440 GB is a modified, highly engineered structural acrylic adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates. EV Therm 440 is an excellent flame retardant with a UL94 V0 rating. It allows control of the adhesive gap to a diameter of 0.25mm (0.01").

H.B. Fuller EV Bond 420

RTU Product Type:Reactive Adhesive, Structural Adhesive, 2K (2 component) Adhesive
Application Area:Electric Vehicle (EV), Batteries, Battery Packs
Compatible Substrates & Surfaces:Acrylic, Gelcoat, Phenolics, Coated Surfaces, Metal, Epoxies, Acrylonitrile Butadiene Styrene (ABS), Fiberglass, Composites, RIM Urethane, Polycarbonate (PC), Plastics, Stainless Steel, Aluminum, Polyurethane
Chemical Family:Acrylics & Acrylates
Features:Low Odor, Room Temperature Curing, Excellent Performance, High Impact Resistance, Flame Retardant, High Durability, Good Adhesion, Good Bonding Strength, Chemical Resistant, Good Weather Stability, High Reliability

H.B. Fuller EV Bond 420 is a high-performance, two-part acrylate adhesive engineered to bond a wide range of plastics, metals, and composite assemblies. It offers outstanding bond strength, is extremely durable, and has excellent impact and weathering properties. EV Bond 420 greatly increases the reliability of finished assemblies, its ability to withstand extreme temperature fluctuations, and its resistance to a wide range of chemicals and environmental conditions. EV Bond 420GB allows control of the adhesive gap to a diameter of 0.25mm (0.01").

H.B. Fuller EV Bond 383

RTU Product Type:Structural Adhesive, 2K (2 component) Adhesive, Epoxy Adhesive
Application Area:Electric Vehicle (EV), Batteries, Battery Packs
Compatible Substrates & Surfaces:Composites, Aluminum, Steel, Metal
Chemical Family:Epoxy & Epoxy Derivatives
Features:Good Elongation, Good Bonding Strength, Thixotropic, Bright Fluorescence, Heat Resistance, Long Open Time, High Impact Resistance, Peel Resistance, Toughened, Ambient Curing

H.B. Fuller EV Bond 383 is a thixotropic, toughened, two-component, ambient-curing epoxy adhesive. High impact resistance, moderate cure speeds, and good peel resistance characteristics make this system suitable for assembly or sealing of reinforced composite structures, metal bonding, or other applications where a toughened epoxy adhesive is required. This system contains dyes that fluoresce brightly with exposure to UV inspection lamps (black light).

H.B. Fuller EV Bond 343

RTU Product Type:Structural Adhesive, 2K (2 component) Adhesive
Application Area:Electric Vehicle (EV), Batteries, Battery Packs
Compatible Substrates & Surfaces:Nylon, Metal, Acrylonitrile Butadiene Styrene (ABS), Ceramic, Elastomers & Rubbers, Natural Rubber, Polycarbonate (PC), Plastics
Chemical Family:Polyurethanes (PU)
Features:Non-Sagging, Good Sagging Resistance, Good Processability, Easier Processing, Semi-flexible, High Reliability, Good Bonding Strength, Ease Of Use, Improved Adhesion, Medium Hardness, Highly Flexible, Resilient, Excellent Substrate Adhesion

H.B. Fuller EV Bond 343 is a medium-hardness, semi-flexible two– component polyurethane adhesive designed for bonding applications requiring resilient bonds, non-sag application and enhanced adhesion to flexible substrates. EV Bond 343 is suitable for bonding metals, ceramics, natural rubber, thermosetting polymers and select types of unprepared thermoplastic substrates such as ABS, polycarbonate and nylon.

H.B. Fuller EV Protect 4006 SFR

Foam Type:2K System
Chemical Family:Polyurethanes (PU)
End Uses:Battery Cell Potting, Battery Module Encapsulation
Physical Form:Liquid

H.B. Fuller EV Protect 4006 SFR is a liquid-applied, two-component flame-retardant, low-density polyurethane foam material engineered for potting and encapsulating battery cells in electric vehicle (EV) battery modules. It allows engineers to increase the power density of their modules while enhancing safety and protection from thermal propagation. Its ultra-lightweight nature minimizes weight impact on battery modules. Additionally, it offers noise, vibration, and harshness benefits to the battery system by unitizing the battery module and absorbing external environmental impacts.

H.B. Fuller EV Bond 700FR

Application Method:Extrusion, Spray, Slot-Die, Roller, Bead
Compatible Substrates & Surfaces:Glass, Stainless Steel, Aluminum, Polyethylene Terephthalate (PET), Nylon, Metal
Features:Light Weight, Good Bonding Strength, Low Viscosity, Flame Retardant

H.B. Fuller EV Bond 700FR is a flame retardant grade non- reactive hot melt pressure sensitive adhesive (FR-PSA) with excellent bonding to polar substrates. The added FR package provides UL94-V0 rating performance and still allows for precise application at a wide range of production speeds in EV pouch cell battery bonding or as a process aid in EV Battery construction.

H.B. Fuller EV Therm 420

Chemical Family:Acrylics & Acrylates
Compatible Substrates & Surfaces:Metal, Epoxies, Acrylonitrile Butadiene Styrene (ABS), Fiberglass, RIM Urethane, Acrylic, Polycarbonate (PC), Gelcoat, Phenolics, E-Coated Surfaces, Stainless Steel, Aluminum, Polyurethane, Thermoplastics, Thermosetting Plastics
Features:Good Adhesion, Room Temperature Curing, Good Strength, Excellent Multi-Substrate Adhesion, Wide Temperature Operating Range, High Impact Resistance, Good Thermal Conductivity

H.B. Fuller EV Therm 420 is a modified, highly engineered Structural Acrylic Adhesive designed to provide excellent thermal conductivity while maintaining superior strength and performance properties across a wide range of temperatures and substrates.

H.B. Fuller EV Protect 5008

RTU Product Type:Encapsulant
Application Area:Electric Vehicle (EV), Batteries

H.B. Fuller EV Protect 5008 is an encapsulant used in adhesives and sealants. It is designed for electrical and electronics applications, specifically for parts and components in batteries and electric vehicles (EVs).

H.B. Fuller EV Protect 300

RTU Product Type:2K (2 component) Adhesive, Encapsulant
Application Area:Electric Vehicle (EV), Battery Cells, Batteries
Chemical Family:Polyurethanes (PU)
Features:Soft, Fast Curing, Room Temperature Curing, Excellent Flow Properties, Highly Flexible, Flame Retardant, Low Viscosity, Reduces Thermal Propagation, Good Thermal Conductivity

H.B. Fuller EV Protect 300 is a two-component, low viscosity polyurethane encapsulating system that is designed for potting and encapsulating of battery cells in battery modules. This product offers battery designers the ability to enhance safety and protection from thermal propagation.

H.B. Fuller EV Protect 4006

RTU Product Type:2K (2 component) Adhesive, Encapsulant
Application Area:Electric Vehicle (EV), Batteries
Chemical Family:Polyurethanes (PU)
Features:Vibration Resistance, Good Volume Expansion, Room Temperature Curing, Good Weather Stability, High Impact Resistance, Fire Proof, Non Corrosive, Light Weight, Self-Leveling, Flame Retardant, Excellent Substrate Adhesion, Low Viscosity, Reduces Thermal Propagation, Good Processability, Cost Effective, Low Density, High Insulation Properties, Non-Outgassing

H.B. Fuller EV Protect 4006 is a liquid-applied, two-component, flame-retardant, low-density polyurethane foam material designed for the potting and encapsulation of battery cells in EV battery modules. EV Protect 4006 SFR offers battery design engineers the ability to increase the power density of their modules while enhancing safety and protection from thermal propagation. The ultra lightweight nature of the EV Protect 4006 SFR minimizes the weight impact to the battery modules. The semi-structural properties of the material also provide noise, vibration, and harshness benefits to the battery system by unitizing the battery module and absorbing external environmental impacts.

Show

of 23 results