Products

Swift®therm 3055 is a hot melt adhesive with good adhesion to filter media, reduced shrinkage, and good flexibility. It has been developed for the manufacture of air filters as a pleat separator. Filter media is a suitable substrate for this product.

EternaBond® FGT BC-1101 is a highly compressible PVC foam core encapsulated with a high-tack butyl adhesive/sealant. This flexible material easily conforms to corners and irregular contours. It provides a secure seal that helps protect against water penetration and prevents corrosion and moisture damage. Furthermore, it eliminates the need for cap sealing by gasketing, thereby improving quality.

H.B. Fuller GP Mist Adhesive is a solvent-based adhesive. The adhesive provides high initial tack, allowing for quick adhesion, and has a long bonding time for aerosol spray applications. It creates strong and reliable bonds between surfaces. The fine mist pattern of the adhesive ensures extended coverage, enabling efficient and uniform application. H.B. Fuller GP Mist Adhesive is suitable for bonding a wide range of surfaces, including metals, plastics, FRP (Fiber Reinforced Plastic), SMC (Sheet Molding Compound), wood, insulation, fabric, foils, thin films, displays, liners, gaskets, foam, cardboard, and paper. It offers both permanent and temporary bonding capabilities, depending on the specific requirements of the application. This adhesive is commonly used in aerosol can packaging applications, where it provides strong and durable bonds. The high initial tack allows for immediate adhesion, while the long bonding time allows for proper positioning and alignment before the bond fully sets.

Swift®therm 7297 is a hot melt adhesive used for case and box sealing, as well as fresh or frozen food packaging. The product appears as a yellow solid with an EVA base. It has a medium setting rate, which varies according to the operating temperature, the weight of the adhesive, and the substrate.

H.B. Fuller FH7026 is a two-part, room-temperature-curing acrylic adhesive. This material is designed to meet the requirements for structural bonding in electronic assemblies. It cures rapidly at room temperature, and the cure times can be reduced with the addition of mild heat to the bonded assemblies. This product also provides excellent adhesion and is flexible.

EternaBond® FGT BC-1121 is a highly compressible PVC foam core encapsulated with a high-tack butyl adhesive/sealant. This flexible material easily conforms to corners and irregular contours. It provides a secure seal that helps protect against water penetration and prevents corrosion and moisture damage. Furthermore, it eliminates the need for cap sealing by gasketing, thereby improving quality.

EternaBond® Foam Gasket Tape (FGT) is a PVC foam core with a high-tack butyl adhesive that provides a flexible gasketing material to seal against water penetration, corrosion, and moisture damage. This game-changing hybrid solution features multiple sealing technologies in one time-saving step. The highly compressible foam core conforms easily to corners and irregular contours, filling oversized gaps and bonding to both the body and the frame. EternaBond® Foam Gasket Tape (FGT) from H.B. Fuller creates a barrier to prevent leakage without requiring a secondary seal, making it a reliable and convenient choice.

EternaBond® FGT BC-1241 is a highly compressible PVC foam core encapsulated with a high-tack butyl adhesive/sealant. This flexible material easily conforms to corners and irregular contours. It provides a secure seal that helps protect against water penetration and prevents corrosion and moisture damage. Furthermore, it eliminates the need for cap sealing by gasketing, thereby improving quality.

Cyberbond CB 2240 is a partly flexible cyanoacrylate, also known as rubber tough. It allows dynamic and temperature-loaded bonds and guarantees certain shock-absorbing properties. This grade is also excellent for combination bondings like metal to rubber or metal to plastic. CB 2240 is a colorless, opaque grade with outstanding performance. Dispensing via, e.g., LINOP dispensing equipment is limited.

H.B. Fuller EA6206 is a one-component, ultraviolet light-curable adhesive designed for LCD terminal pin bonding applications. The cured adhesive exhibits high flexibility and toughness, good moisture resistance, and good chemical resistance. The product offers excellent adhesion to glass and is ideal for applications such as flat panel displays (FPD).

Foster® PEB-360 stands as the pinnacle elastomeric butyl rubber sealant, meticulously crafted to fulfill the critical needs of metal buildings and beyond. Available in Gray and Black, its malleable extruded butyl tape form ensures effortless application. Boasting superior cohesive and adhesive strength, it surpasses sealing requirements for window glazing, air conditioning, and refrigeration. Securely packaged in cartons, Foster® PEB-360 offers versatility in sizes, catering to all application demands with ease.

H.B. Fuller EA6204 is a one-component, ultraviolet light-curable adhesive designed for LCD end-sealing applications. The cured adhesive exhibits high flexibility and toughness, good moisture resistance, and good chemical resistance. The product offers excellent adhesion to glass and is ideal for applications such as flat panel displays (FPD).

Swift®therm 9054 is a hot melt adhesive with a long open time, good spray film, and flexible, moisture- and cold-resistant bondings. It is suitable for bonding various plastic materials to wood as well as textiles, felts, foams, paper, cardboard, and other materials.

H.B. Fuller EA6205 is a one-component, ultraviolet light-curable adhesive designed for LCD terminal pin bonding applications. The cured adhesive exhibits characteristics of high flexibility and toughness, good moisture resistance, and good chemical resistance. The product offers excellent adhesion to glass and is ideal for applications such as flat panel displays (FPD).

Cyberbond CB 2241 is a partly flexible cyanoacrylate, also known as rubber tough. It allows dynamic and temperature-loaded bonds and guarantees certain shock-absorbing properties. This grade is also excellent for combination bondings like metal to rubber or metal to plastic. CB 2241 is a black grade with an outstanding performance. Dispensing via, e.g., LINOP dispensing equipment is limited.