Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Guidelines for Use
Preparation:
- Use in a well Ventilated Area.
- Surfaces should be clean, dry and dust free.
- Shake aerosol before use.
Application:
Dependent upon application, Tuskbond S10 Silicone Spray should besprayed onto the surface from 6-10 inches away, if required buff with aclean cloth.
Properties
- Physical Form
- Appearance
- Colourless
- Typical Properties
Value Units Test Method / Conditions Storage Temperature 5 - 25 °C -
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Size
Available Sizes:
500ml aerosol
Storage & Handling
- Disposal Information
- Once the aerosol is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
- Aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol).
- Storage & Shelf Life
- Protect from extremes of temperature in a controlled environment between 5 and 25°C, and away from direct sunlight. Do not stand on a cold concrete floor.
- Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months.