Optimelt 1012A
1 of 1 products in this brandOptimelt 1012A is a low application temperature hot melt adhesive designed for use on Hygiene industry, especially construction hot melt adhesive. It shows good several kinds spray property and high peel strength.
RTU Product Type: Hot Melt Adhesive
Features: High Peel Strength, Low Application Temperature
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
Applications
- Segment
Applications & Uses
- Applications and Usage Information
-
- Application Temperature : Between 120°C and 140°C depending on the operating conditions.
- Application Methods : Can be run on all standard hot melt systems.
Features
- Ready-to-Use Product Features
Packaging & Availability
- Regional Availability
- Packaging Information
-
20 Kg/bag, or as required.
Physical Properties
- Physical Form
- Appearance
-
Pillow
Properties
- Typical Properties
-
Value Units Test Method / Conditions Application Temperature 120 - 140 °C - Color Scale approx. 3 Gardner Gardner Color Scale Softening Point approx. 80 °C Ring and Ball Test Storage Temperature 0 - 40 °C - Viscosity (at 100°C) approx. 7,000 mPa.s Brookfield Viscometer Viscosity (at 120°C) approx. 2,000 mPa.s Brookfield Viscometer Viscosity (at 140°C) approx. 600 mPa.s Brookfield Viscometer Viscosity (at 160°C) approx. 300 mPa.s Brookfield Viscometer
Safety & Health
- Precautions
-
- Material is applied hot-appropriate clothing and eye protection should be used.
- Use adequate ventilation to remove any hot melt fumes or vapors that are generated.
- Keep containers and premelters covered to avoid contamination.
Storage & Handling
- Storage and Shelf Life Conditions
-
Store under ambient conditions preferably below 40°C and above 0°C to avoid water condensation. The shelf life is minimum 12 months under recommended conditions.
- Shelf Life
-
min. 12 months