Millennium Cyclone System Solution

1 of 54 products in this brand

Millennium Cyclone System Solution is a specially formulated flushing solution designed exclusively for use with the patented Millennium Cyclone* by Garlock. Packaged in a convenient 1-gallon container, this product is equipped with quick-connect fittings for effortless and efficient usage. It cleans and removes residual adhesive prior to long-term storage, keeping pumps, hoses, and manifolds clean.

Equipment TypeDispensing Systems

Technical Data Sheet

Enhanced TDS

Identification & Functionality

Equipment Type
Product Image

Features & Benefits

Equipment Features
Key Attributes
Features Benefits
Quick connect fittings Fast, easy hook up
Cleans/removes residual material for long term storage Helps prevent cured adhesive from damaging pump and hose
One gallon packaging Easy to handle
Specially designed for use in the Cyclone 1 & Cyclone 5/15 Will not damage pump or components

 

Applications & Uses

Basic Use

Millennium Cyclone System Solution is used to flush residual adhesive component from the Cyclone pump and hose in preparation for long-term equipment storage. The Cyclone adhesive pump cart should be flushed with Millennium Cyclone System Solution immediately after use whenever the anticipated idle time for the pump is greater than two weeks.

Application Method

1. Ensure that power to the Cyclone pump is off.
2. Remove Millennium PG-1 adhesive bags from Cyclone by diskonnecting the quick connect fittings.
3. Installll box labeled Millennium Cyclone System Solution Part 1 (color coded white) onto the Cyclone tray labeled Part 1 (white) and connect black fittings.
4. Install box labeled Millennium Cyclone System Solution Part 2 (color coded blue) onto the Cyclone tray labeled Part 2 (blue) and connect gray fittings.
5. Restore power to the Cyclone pump. Place an approved waste container under the gun and remove the mixing nozzle.
6. Slowly open the gun valves and pump entire contents of Millennium Cyclone System Solution into the waste container.
To ensure all adhesive component material is properly flushed out of the pump, hoses, and gun all solution in Part 1 and Part 2 boxes must be used.

Limitations
  • Not to be used as an adhesive
  • For use in Cyclone 1 and Cyclone 5/15 pump machine only.

Packaging & Availability

Regional Availability
  • Africa
  • Australia & New Zealand (ANZ)
  • Europe (Excluding Russia)
  • India
  • Latin America
  • Middle East
  • North America
  • South East Asia
Packaging and Coverage

Millennium Cyclone System Solution is available in the following package:

Size Part # Sets/Pallet
1 gal (3.79L) box, Part 1 (A) EQ-CSS1B-A01 20
1 gal (3.79L) box, Part 2 (B) EQ-CSS1B-B01 20

 

Storage & Handling

Storage Conditions

Keep temperature of contents between 45°F-95°F (7°C-35°C). Bring temperature of material to approximately 70°F (22°C) just before use. Do not store in direct sunlight or above 95°F (35°C). Store boxes valve side up.